Determination of percolation threshold electroactivity and phase behavior study on conducting blends of thermotropic polyesters and polyaniline

The new thermotropic polyester/polyaniline (PIn/PAni) blends have been prepared by solution blend of synthesized liquid crystalline poly[4,4′‐bis (ω‐alkoxy) biphenylisophthalate]s having four and six methylene units in spacer (PI4 and PI6) with PAni doped with camphorsolfonic acid (CSA). The percolation threshold electroactivity of prepared blend films has been determined by cyclic voltammetry. The effect of the PAni concentration, solvent nature and polyester structure on the electroactivity of the blends has been investigated. The extremely low percolation threshold of prepared PIn/PAni‐CSA blends from dimethylformamide (DMF) and m‐cresol solution was 3% weight of PAni‐CSA. The amount of conducting polymer necessary to retard the formation of the liquid crystalline (LC) phase is up to 45% by weight. Phase behavior studies by differential scanning calorimetry and polarizing microscopy show that blends with 45% of conducting polymer are both liquid crystal and conductive. The morphology of the blends has been investigated by scanning electron microscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Thermotropic polyesters. 1: Synthesis, characterization and thermal transition of poly[4,4-bis(ω-alkoxy)biphenyl isophthalate]

A new homologous series of thermotropic polyesters has been synthesized by polycondensation reaction between isophthaloyl chloride and mesogenic diols 4,4^′-bis(ω-hydroxyalkoxy)biphenyl in which the spacer length is varied from 3 to 6 methylene units. The thermal behavior of the polymers has been characterized using polarized light microscopy and differential scanning calorimetry (DSC). The odd members exhibit a smectic C (S_C) phase in a narrow temperature interval, while the even members form a smectic A (S_A) phase in a broader temperature range. All of the obtained compounds were characterized by conventional spectroscopic methods.     

Photovoltaic cells technology: principles and recent developments

Solar energy is one of the renewable energy resources that can be changed to the electrical energy with photovoltaic cells. This article accomplishes a comprehensive review on the emersion, underlying principles, types and performance improvements of these cells. Although there are some different categorizations about the solar cells, but in general, all of them can be divided to crystalline silicon solar cells, thin film technology, III–V multijunction cells, dye-sensitized solar cells, polymer solar cells and quantum structured solar cells. Thin film technology is investigated in two non-crystalline silicon solar cells and chalcogenide cells. We present a complete categorization of solar cells and discuss the recent developments of different types of solar cells. Indeed, this paper covers almost all of the development processes of solar cells from their emersion in 1939 up to now. Also, due to substantial effects of the light trapping techniques on the improvements of the solar cells, a comprehensive study has been carried out.     

Simultaneous spectrofluorimetric determination of levodopa and propranolol in urine using feed-forward neural networks assisted by principal component analysis

The simultaneous determination of levodopa (LD) and propranolol (PRO) using fluorescence spectrometric technique is described. The method involves measuring the natural fluorescence of these drugs in the micellar media of sodium dodecyl sulfate (SDS) using principal component analysis-feed-forward neural networks (PC-FFNNs). Experimental conditions such as effect of pH and SDS concentration were optimized. Under the optimum conditions, the linear determination ranges of LD and PRO are 2.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ and 3.6 × 10⁻⁹ to 1.8 × 10⁻⁶ mol L⁻¹, respectively. A set of synthetic binary mixtures of LD and PRO was prepared and their concentrations were predicted by the proposed method. Satisfactory results were obtained by the combination of fluorescence technique with chemometrics methods. The method was successfully applied to the determination of LD and PRO in tap water and in urine samples.     

Ultra-compact all-optical phase-controlled NAND,OR, XOR,XNOR, and NOT multi-function logic gate

Optical and Quantum Electronics - A theoretical analysis of the modulational instability (MI) in a nonlinear oppositely directional coupler with one channel fabricated from nonlinear medium having...     

Preparation of new supramolecular liquid-crystalline polyesters containing 3-chloro-4-(alkoxy)benzoic acids

Supramolecular liquid-crystalline polyester complexes based on intermolecular hydrogen bonds between the carboxylic group and the pyridyl moieties was prepared by using non-liquid-crystalline H-donors, [3-chloro-4-(butyloxy)benzoic acid (2a), 3-chloro-4-(octyloxy)benzoic acid (2b), 3-chloro-4-(dodecyloxy)benzoic acid (2c) and 3-chloro-4-(tetradecyloxy)benzoic acid (2d)] and H-acceptor-polyester containing pyridyl units. Intermolecular hydrogen bond formation was confirmed by Fourier transform infrared spectroscopy. The liquid-crystalline behavior of the complex formed was established by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). The polyester complexes containing 2c and 2d donor components exhibit liquid crystalline mesophase and behave as side-chain liquid-crystalline polymers. Compared with unsubstituted parent acid, the presence of chloro group as a lateral substituent has a little negative effect on the induction of liquid crystallinity on the polyester complexes systems. The results show that the more stability of the obtained H-bonded complexes in comparison with analogues without 3-Cl substituents is due to the increased acidity of benzoic acid moiety.     

In vitro selection and characterization of deoxyribonucleic acid aptamers for digoxin

The low therapeutic index of digoxin necessitates careful monitoring of its serum levels. Most of digoxin immunoassays suffer from interferences with digoxin-like immunoreactive substances. Since aptamers have been shown to be highly specific for their targets, the aim of this study was to develop DNA aptamers for this widely used cardiac glycoside. Digoxin was coated onto the surface of streptavidin magnetic beads. DNA aptamers against digoxin were designed using Systematic Evolution of Ligands by Exponential enrichment method (SELEX) by 11 iterative rounds of incubation of digoxin-coated streptavidin magnetic beads with synthetic DNA library, DNA elution, electrophoresis and PCR amplification. The PCR product was cloned and sequenced. Binding affinity was determined using digoxin–BSA conjugate, coated onto ELISA plate. Inhibitory effect of anti-digoxin aptamer was conducted using isolated guinea-pig atrium. Three aptamers (D1, D2 and D3) were identified. Binding studies of fluorescein-labeled truncated (without primer binding region) D1 and D2 and full length D1 anti-digoxin aptamers were performed and their corresponding dissociation constants values were 8.2 × 10⁻⁹, 44.0 × 10⁻⁹ and 17.8 × 10⁻⁹ M, respectively. This is comparable to what other workers have obtained for interaction of monoclonal antibodies raised against digoxin. There was little difference in binding affinity between full length and truncated anti-digoxin D1 aptamer. D1 anti-digoxin aptamer also inhibited the effects of digoxin on the isolated guinea-pig atrium. D1 anti-digoxin aptamer distinguished between digoxin and ouabain in both tissue study and binding experiments. Our finding indicated that D1 anti-digoxin aptamer can selectively bind to digoxin. Further studies might show its suitability for use in digoxin assays and as a therapeutic agent in life-threatening digoxin toxicity.     

All-Optical Multi-Mode Interference Switch Using Non-Linear Directional Coupler as a Passive Phase Shifter

Abstract

This article presents an all-optical multi-mode interference switch in which the non-linear directional coupler is utilized to realize a passive phase shifter. The proposed structure can be used either as a 1 × 2 or a 2 × 2 switch, with two inputs applied simultaneously in the latter case. The operation of the device is mainly based on the phase difference of the inputs of the multi-mode interference section. The beam propagation method is used for the design and simulation of the structure. The simulation results approve the low sensitivity on wavelength and fabrication tolerances. The crosstalk of the structure is equal to ?31.6 dB.     

Thermotropic polyesters. 2: Synthesis, characterization and thermal transitions of copolyesters containing 4,4′-bis (ω-alkyloxy) biphenyl isophthalate units

Thermotropic copolyesters containing an isophthalate unit and mesogenic 4, 4′-bis (ω-hydroxyalkyloxy) biphenyls (n = 3, 4, 6) with different numbers of methylene units have been synthesized by melt polymerization. The number-average molar mass (M_n) was estimated from end group analysis by ¹H NMR. The copolymer compositions were also obtained from ¹H NMR. The thermal behavior of the copolymers containing even-even (n = 4, 6) and odd-even (n = 3, 4) pairings has been investigated and is also compared with that of the analogous homopolymers. The copolymers exhibit reduced melting point and extending liquid crystalline range identified using polarizing microscopy and DSC. All of the obtained compounds were characterized by conventional spectroscopic methods.