EPR and XPS measurements of polymeric catalysts doped with hereopolyacids in oxygen adsorption studies

The goal of our studies was to determine the nature of interactions between catalytic active samples, such as polypyrrole (PPy) doped with: chloride anions, heteropolyacids such as H₅PMo₁₀V₂O₄₀, or H₄SiW₁₂O₄₀, and oxygen particles. In order to reveal the mechanism of the linkage between the catalysts and oxygen we provided the electron paramagnetic resonance (EPR) measurements of synthesized samples in O₂ and N₂ flow. Moreover, the X-ray photoelectron spectroscopy (XPS) measurements were performed to show the properties of doped heteropolyacids and the state of nitrogen in polypyrrole matrix. The results of EPR studies of PPy(Cl), PPy(H₄SiW₁₂O₄₀), PPy(H₅PMo₁₀V₂O₄₀) samples, show that the polypyrrole doped with chloride anions interacts much easier with oxygen than polypyrrole doped with heteropolyacids (in the above given order, of preference with the most active polypyrrole system first). It correlates with XPS results, which show that a molybdenium-vanadium anion is more reduced than a silicon-tungsten one. The redox reactions of heteropolyacids involve the oxidation-reduction of the conjugated polymer chain, leaving no or little place for interactions with oxygen. Polypyrrole doped with H₄SiW₁₂O₄₀ shows some oxygen sensitivity as observed in the EPR studies, as opposed to polypyrrole doped with H₅PMo₁₀V₂O₄₀, which is in line with the XPS results.     

Concerning seven and eight mutually orthogonal Latin squares

In this paper, three new direct Mutually Orthogonal Latin Squares (MOLS) constructions are presented for 7 MOLS(24), 7 MOLS(75) and 8 MOLS(36); then using recursive methods, several new constructions for 7 and 8 MOLS are obtained. These reduce the largest value for which 7 MOLS are unknown from 780 to 570, and the largest odd value for which 8 MOLS are unknown from 1935 to 419. © 2003 Wiley Periodicals, Inc.     

Adsorption of argon and nitrogen in cylindrical pores of MCM-41 materials: application of density functional theory

Adsorption of argon and nitrogen at their respective boiling points in cylindrical pores of MCM-41 type silica-like adsorbents is studied by means of a non-local density functional theory (NLDFT), which is modified to deal with amorphous solids. By matching the theoretical results of the pore filling pressure versus pore diameter against the experimental data, we arrive at a conclusion that the adsorption branch (rather than desorption) corresponds to the true thermodynamic equilibrium. If this is accepted, we derive the optimal values for the solid-fluid molecular parameters for the system amorphous silica-Ar and amorphous silica-N₂, and at the same time we could derive reliably the specific surface area of non-porous and mesoporous silica-like adsorbents, without a recourse to the BET method. This method is then logically extended to describe the local adsorption isotherms of argon and nitrogen in silica-like pores, which are then used as the bases (kernel) to determine the pore size distribution. We test this with a number of adsorption isotherms on the MCM-41 samples, and the results are quite realistic and in excellent agreement with the XRD results, justifying the approach adopted in this paper.     

A model of adsorption at liquid-solid interface involving association in the bulk phase

A model of monolayer adsorption of binary liquid mixtures on homogeneous and heterogeneous solid surfaces involving association of one component in the bulk phase is discussed. Suitable model calculations, illustrating association and heterogeneity effects, have been performed according to an equation derived for adsorption excess. This equation has been examined by using the experimental data of adsorption of alcohols from benzene andn-heptane on silica gel.

---

Adsorptionsmodell für die Grenzfläche Feststoff-Flüssigkeit unter Berücksichtigung der Assoziation in der Flüssigkeitsphase

Zusammenfassung Es wird ein Adsorptionsmodell binärer, flüssiger Mischungen an homogenen und heterogenen Oberflächen von Feststoffen unter Beachtung der Assoziation eines der Bestandteile in der Flüssigkeitsphase diskutiert. Mit der aus dem Oberflächenüberschuß abgeleiteten Gleichung wurden entsprechende Modellberechnungen durchgeführt, die die mit Assoziation und Heterogenität verbundenen Effekte illustrieren. Die Gleichung wurde für die experimentellen Daten der Alkoholadsorption aus Benzol undn-Heptan an Kieselgel überprüft.

     

Determination of traces of cobalt in the presence of nioxime and cetyltrimethylammonium bromide by adsorptive stripping voltammetry

A sensitive method of Co(II) determination by adsorptive stripping voltammetry is presented. The method exploits the enhancement of cobalt peak current observed in the system Co(II)-nioxime-cetyltrimethylammonium bromide-piperazine-N,N′-bis(2-ethanesulfonic acid). The calibration plot for an accumulation time of 60 s is linear from 5 × 10⁻¹¹ to 3 × 10⁻⁹ mol L⁻¹. The relative standard deviation is 3.8% for Co(II) determination at concentration 1 × 10⁻⁹ mol L⁻¹. The detection limit is 1.7 × 10⁻¹¹ mol L⁻¹. The validation of the method is performed by the analyses of certified reference materials and comparing the result of Co(II) determination in river water sample by the proposed method with those obtained by ET AAS. The main advantage of this new system is the micro-trace Co(II) determination by adsorptive stripping voltammetry, as compared to those described before, a low concentration of the supporting electrolyte used, and so commercially available reagents without additional purification can be used.     

Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations

A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.     

Dependence of the methylene selectivity on the composition of hydro-organic eluents for reversed-phase liquid chromatographic systems with alkyl bonded phases

Summary A theoretical treatment is presented which considers differences between the composition of the mobile phase and solvents that are incorporated into the bonded phase via preferential sorption. Equations are derived and used to analyze retention data for various homologs chromatographed under reversed-phase conditions using alkyl bonded phases and combinations of water-methanol, water-acetonitrile and watertetrahydrofuran as mobile phases. In the case of water-methanol the surface phase and bulk mobile phase compositions are similar. However, significant differences in composition between the two phases are observed when binary combinations of water-acetonitrile and water-tetrahydrofuran are used as the cluents.     

A simple isotherm equation for describing gas adsorption on heterogeneous microporous solids

A simple isotherm equation for describing gas adsorption on solids showing heterogeneity of microporous structure is proposed. It is shown that this equation gives a good representation of the experimental data of argon, nitrogen and benzene adsorption on different types of activated carbons. Its parameters may be used to characterize heterogeneity of microporous structure of the solids.

---

Eine einfache Isotherme zur Beschreibung der Gas-Adsorption an heterogenen mikroporösen Feststoffen

Zusammenfassung Es wird eine einfache Isotherme zur Beschreibung der Gasadsorption an Feststoffen mit heterogener mikroporöser Struktur vorgeschlagen. Es wird gezeigt, daß diese Gleichung die experimentellen Daten für die Adsorption von Argon, Stickstoff und Benzol an verschiedenen Typen von Aktivkohle gut beschreibt. Die Parameter der Isotherme können zur Charakterisierung der Heterogenität der mikroporösen Struktur von Festkörpern herangezogen werden.

     

Modification of Surface and Structural Properties of Ordered Mesoporous Silicates

Two simple modification methods for ordered mesoporous silicas were examined and compared. MCM-41 molecular sieve was physically coated with 4-cyano-4-biphenyl [4(4-pentenyloxy)]benzoate (CBPB) and chemically modified using trimethylethoxysilane. The structural and surface properties of the obtained materials were characterized using elemental analysis, thermogravimetry and nitrogen adsorption over a wide pressure range.It was shown that the pore size of the MCM-41 material was not decreased significantly after the coating procedure, even for high loadings of CBPB. Moreover, low pressure adsorption measurements indicated that significant fractions of the MCM-41 surface were not covered by CBPB, even for high CBPB loadings, which suggests that the attained coverage may be very nonuniform. The chemical bonding procedure led to a marked decrease in the pore size and change of surface properties.It was demonstrated that nitrogen adsorption measurements provide a means of a thorough characterization of modified MCM-41 materials, allowing to estimate the surface area, pore volume and pore size distribution. Moreover, low pressure adsorption data can be used to qualitatively or semiquantitatively assess the surface coverage of the coated/bonded organic groups, which may be used to estimate the uniformity of the coverage and therefore, the usefulness of the modification procedure.