An Efficient Method for the Synthesis of 3-Cyano-6-hydroxy-2(1H)-pyridinones under Microwave Irradiation and Solvent-free Conditions

Summary. Three component condensation of alkylacetoacetates, primary amines, and alkyl cyanoacetates catalyzed by solid supports under microwave irradiation gave N-alkyl 3-cyano-6-hydroxy-2(1H)-pyridinones with high yields. Upon carrying out the reaction under the same condition on acidic alumina, zeolite HY, silica gel, and montmorillonite K-10, the best yields were achieved by silica gel. Corresponding author. E-mail: balalaie@yahoo.com Received August 28, 2002; accepted September 3, 2002     

Isolating the most recent entry in a random recursive tree by random cuts

A recursive tree is constructed by starting with a root node and repeatedly adjoining new nodes to one node of the tree already constructed. Such a tree can represent, for example, the heirarchy of a workforce of a company that grows via recruiting. At times of economic depression, the company may decide to lay off participants, and in some cases it is a fair policy to relieve the last senior worker (most recent entry in the tree). If we remove an edge from such a tree then it falls into two subtrees one of which contains the most recent entry. If we continue to remove edges from the successively smaller subtrees that contain the most recent entry, we eventually isolate the most recent entry. We consider how many randomly selected edges must be removed in average before isolating the most recent entry by this procedure.     

Quaternized amino functionalized cross-linked polyacrylamide as a new solid-liquid phase transfer catalyst in reduction of carbonyl compounds with NaBH4

Poly[N-(2-aminoethyl)acrylamido]trimethyl ammonium chloride resin was developed as a new polymeric phase transfer catalyst. This quaternized polyacrylamide catalyzed the chemoselective reduction of aldehydes and ketones by NaBH₄ to give corresponding alcohols in high yields under mild conditions.     

Temperature tunable random laser using superconducting materials

We propose that spectral intensity of superconductor based random lasers can be made tunable by changing temperature. The two fluid model and wavelength dependent dispersion formula have been employed to describe the optical response of the superconducting materials. Random laser characteristics have been calculated using the one dimensional FDTD method. Our simulation results reveal that the emission spectrum can be manipulated through the ambient temperature of the system. It is observed that transition from metal phase to pure superconducting phase leads to the enhancement of the laser emission. Furthermore, spatial distribution of the fields in one dimensional disordered media is very sensitive to the system temperature.     

Effective and selective aerobic oxidation of primary and secondary alcohols using CoFe2O4@HT@Imine‐CuII and TEMPO in the air atmosphere

In this study, we present a versatile and easy procedure for modifying a cobalt ferrite nanoparticle step by step. A new nanocatalyst was prepared via Cu^II immobilized onto CoFe₂O₄@HT@Imine. The catalyst was fully characterized by Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), and vibrating sample magnetometer (VSM) analyses. The current procedure as a green protocol offers benefits including a simple operational method, an excellent yield of products, mild reaction conditions, minimum chemical wastes, and short reaction times. Without any significant reduction in the catalytic performance, up to five recyclability cycles of the catalyst were obtained. The optimization results suggest that the best condition in the oxidation of benzyl alcohol derivatives is 0.003 g of the CoFe₂O₄@HT@Imine‐Cu^II catalyst, TEMPO, at 70°C under solvent‐free condition and air.     

Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

Preparation,characterization, and assessment of cytotoxicity,antioxidant, antibacterial,antifungal, and cutaneous wound healing properties of titanium nanoparticles using aqueous extract of Ziziphora clinopodioides Lam leaves

In recent decades, nanotechnology is growing rapidly owing to its widespread application in science and industry. The aim of the experiment was chemical characterization and evaluation of cytotoxicity, antioxidant, antibacterial, antifungal, and cutaneous wound healing activities of titanium nanoparticles using aqueous extract of Ziziphora clinopodioides Lam leaves (TiNPs@Ziziphora). These nanoparticles were characterized by fourier transformed infrared spectroscopy (FT‐IR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDS), and UV–visible spectroscopy. The synthesized TiNPs@Ziziphora had great cell viability dose‐dependently (Investigating the effect of the plant on human umbilical vein endothelial cells (HUVECs) cell line) and revealed this method was nontoxic. Then, 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) free radical scavenging test was done to assess the antioxidant properties, which indicated similar antioxidant potentials for TiNPs@Ziziphora and butylated hydroxytoluene. Agar diffusion tests were applied to determine the antibacterial and antifungal characteristics. Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC), and Minimum Fungicidal Concentration (MFC) were specified by macro‐broth dilution assay. The data were analyzed by SPSS 21 software (Duncan post‐hoc test). TiNPs@Ziziphora indicated higher antibacterial and antifungal effects than all standard antibiotics (p ≤ 0.01). Also, TiNPs@Ziziphora inhibited the growth of all bacteria at 2‐16 mg/ml concentrations and removed them at 2‐32 mg/ml concentrations (p ≤ 0.01). In case of antifungal properties of TiNPs@Ziziphora, they prevented the growth of all fungi at 2‐8 mg/ml concentrations and destroyed them at 2‐16 mg/ml concentrations (p ≤ 0.01). In vivo experiment, after creating the cutaneous wound, the rats were randomly divided into six groups: untreated control, treatment with Eucerin basal ointment, treatment with 3% tetracycline ointment, treatment with 0.2% TiO₂ ointment, treatment with 0.2% Z. clinopodioides ointment, and treatment with 0.2% TiNPs@Ziziphora ointment. These groups were treated for 10 days. For histopathological and biochemical analysis of the healing trend, a 3 × 3 cm section was prepared from all dermal thicknesses at day 10. Use of TiNPs@Ziziphora ointment in the treatment groups substantially reduced (p ≤ 0.01) the wound area, total cells, neutrophil, and lymphocyte and remarkably raised (p ≤ 0.01) the wound contracture, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte, and fibrocytes/fibroblast rate compared to other groups. In conclusion, the results revealed the useful non‐cytotoxic, antioxidant, antibacterial, antifungal, and cutaneous wound healing effects of TiNPs@Ziziphora.     

Green synthesis of the 1-substituted 1H-1, 2, 3, 4-tetrazoles over bifunctional catalyst based on copper intercalated into Mg/Al hydrotalcite modified magnetite nanoparticles

An effective one-pot, convenient process for the synthesis of 1- substituted 1H-tetrazoles from triethyl orthoformate, amines, and sodium azide is described using copper (II) doped and immobilized on functionalized magnetic hydrotalcite (Fe₃O₄/HT-NH₂ Cu^II) as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields in water. The new catalyst was characterized using Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), vibration sample magnetometry (VSM) and inductively coupled plasma analysis (ICP-OES). This new procedure offers several advantages such as short operational simplicity, practicability, and applicability to various substrates and the absence of any tedious workup or purification. The loading amount of Cu^II (doped and immobilized) on functionalized magnetic hydrotalcite was indicated to be 4.66 mmol g⁻¹, obtained from the ICP-OES analysis. Also, the excellent catalytic performance, thermal stability, and separation of the catalyst make it an excellent heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity.     

Assessment of antioxidant,cytotoxicity, antibacterial,antifungal, and cutaneous wound healing activities of green synthesized manganese nanoparticles using Ziziphora clinopodioides Lam leaves under in vitro and in vivo condition

In recent decades, nanotechnology is growing rapidly owing to its widespread application in medical science. The aim of the experiment was the evaluation of cytotoxicity, antioxidant, antibacterial, antifungal, and cutaneous wound healing activities of green synthesized manganese nanoparticles using Ziziphora clinopodioides Lam leaves (MnNPs@ZC). The synthesized MnNPs@ZC were characterized using different techniques including UV–Vis., FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometry (EDS). According to the XRD analysis, 48.10 nm was measured for the crystal size of nanoparticles. SEM images exhibited a uniform spherical morphology and size in the range of 47.58 to 70.26 nm for the biosynthesized nanoparticles. MnNPs@ZC revealed excellent non-cytotoxicity effect against human umbilical vein endothelial cells, antioxidant activity against DPPH, antibacterial properties against Gram-negative bacteria (Salmonella typhimurium, Pseudomonas aeruginosa, and Escherichia coli O157:H7) and Gram-positive bacteria (Streptococcus pneumonia, Staphylococcus aureus, and Bacillus subtilis), and antifungal potentials against Candida glabrata, Candida albicans, Candida guilliermondii, and Candida krusei. Also, use of MnNPs@ZC ointment decreased significantly (p ≤ 0.01) the wound area, total cells, neutrophil, and lymphocyte and raised significantly (p ≤ 0.01) the wound contracture, hydroxyl proline, hexosamine, hexuronic acid, fibrocyte, and fibrocytes/fibroblast rate compared to other groups in experimental animals. In conclusion, synthesized MnNPs@ZC indicated antibacterial, antifungal, non-cytotoxicity, antioxidant, and cutaneous wound healing effects in a dose-depended manner. After confirming in the clinical trials, these nanoparticles can be used in human for the treatment of cutaneous and infectious diseases.