Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Differential pulse voltammetric determination of P(V) following adsorptive accumulation of alpha-[PMo(12)O(40)](3-) on a polypyrrole-modified glassy carbon electrode

On the basis of the formation and pre-concentration of an α-Keggin-type [PMo₁₂O₄₀]³⁻ complex, a novel voltammetric method was developed for the determination of trace levels of P(V). The α-[PMo₁₂O₄₀]³⁻ complex was formed by heating a 5×10⁻⁴ M Mo(VI)-0.2 M HCl-40% (v/v) CH₃CN system containing a trace amount of P(V) at 70 °C for 30 min. During the electrochemical polymerization of pyrrole in the α-[PMo₁₂O₄₀]³⁻ solution, the α-[PMo₁₂O₄₀]³⁻ complex was accumulated into the polypyrrole film on a glassy carbon electrode. The differential pulse voltammetric peak current due to the α-[PMo₁₂O₄₀]³⁻ complex incorporated in the polypyrrole film was linearly dependent on the P(V) concentration in the range of 5×10⁻⁹-5×10⁻⁷ M; a detection limit of 2×10⁻⁹ M was achieved.     

Vortex shedding from a ring in shear flow

Vortex shedding from a bluff ring in a linear shear flow has been investigated experimentally. The shedding frequency, measured using a hot wire in various positions within the near wake of the ring, was found to be remarkably insensitive to a mean flow shear parameter, , defined by (d/U _o).U/y, where d is the mean ring diameter and U _o is the undisturbed upstream velocity on the ring axis; even for = 0.41, corresponding to a velocity variation of about ±24% across the outer ring diameter, the Strouhal number was only about 5% lower than in uniform flow. However, the strong axisymmetric shedding which dominates the flow for = 0 is significantly affected by shear. Indeed, spatial correlation measurements demonstrated that the shedding actually becomes anti-symmetric at the highest values of . The implication of these results is that vortex flowmeters constructed using a ring as the shedding body would be relatively unaffected by changes in the upstream mean flow profile.     

Preparation of light-stable micelles with azo dyes from a nonamphiphilic random block copolymer

Light-stable micelles with azo dyes were prepared by micelle formation of a nonamphiphilic diblock copolymer containing azobenzene and UV absorbent at ca. 1 mol% as the unit ratios. The nonamphiphilic block copolymer consists of two different kinds of random copolymer blocks: poly[4-(phenylazophenoxymethyl)styrene-co-vinylphenol] (P(AS-co-VPh)) and poly[4-(2-hydroxybenzophenoxymethyl)styrene-co-styrene] (P(HBS-co-St)). This random block copolymer, P(AS-co-VPh)-b-P(HBS-co-St) formed the micelles in the presence of 1,4-butanediamine (BDA) through hydrogen bond cross-linking between the VPh units via BDA. The micelles had the azobenzene moieties at the cores and the UV absorbents at the coronas. The micelles showed a small color difference in color fading experiments, in comparison with the unimers and with micelles having no UV absorbent at the coronas. It is significant that the diblock copolymer forms the micelles and has the UV absorbents at the coronas to suppress the color fading. Furthermore, the chain length of ,-diamines had no effect on the hydrodynamic radius of the micelles, but affected the aggregation number and the cmc.     

A New Synthesis of 3-Deoxy-D-Manno-Octulosonic Acid (KDO) From D-Mannose Via Condensation of Dioxene

Abstract

The title compound has long been known as an essential component of lipopolysaccharides (LPS) and capsular polysaccharides which exist in the outer membrane of Gram-negative bacteria. KDO has attracted additional attention as a consequence of some remarkable discoveries; i) mutants unable to produce KDO are non-viable.¹ ii) KDO is not present in mammalian cells,² iii) the 2-deoxy analog of β-KDO represents a new class of synthetic antimicrobial agent.^3,4 Although syntheses of KDO have been reported by many groups,^5–8 a more efficient synthetic method endowed with the potential for synthesis of not only complex glycoconjugates but also biologically significant analogs is required.     

Permselective monolayer membrane based on two-dimensional cross-linked polysiloxane LB films for hydrogen peroxide detecting glucose sensors

Novel two-dimensional (2D) cross-linked polysiloxane LB films were prepared and applied for glucose sensing as H2O2-permselective films in order to block other electroactive interferences, such as L-ascorbic acid, L-cysteine, uric acid and acetaminophen; the 2D cross-linked polysiloxane monolayers were remarkably effective in eliminating interfering responses and had a rapid response for glucose, even though the films were only a monolayer thick.     

Direct detection of formate ligation in cytochrome c oxidase by ATR-FTIR spectroscopy

The IR signature of binding of formate to the heme a(3-)Cu(B) binuclear site of bovine cytochrome c oxidase has been obtained by perfusion ATR-FTIR spectroscopy. The data show unequivocally that formate binds in its anionic form despite its binding being electroneutral overall. The bound formate can be distinguished from free ligand by the binding-induced sharpening and downshifting of vibrational bands. Formate ligation also causes shifts of vibrational modes of heme a(3) and its substituents and perturbation of histidine residues. The association of the accompanying protonation change with a carboxylate or tyrosine can be ruled out and may involve a histidine metal ligand or, more likely, a simple displacement into the bulk phase of a hydroxide ligand to heme a(3) or CU(B), a reaction which would account for stoichiometric proton uptake and maintenance of net charge within the binuclear center domain.     

Relation between drug-induced taste disorder and chelating behavior with zinc ion; statistical approach to the drug-induced taste disorder, part II

There are many reports that the drug-induced taste disorder is ascribable to the chelate reaction of a drug with zinc ion and the following zinc deficiency. As a quantitative measure of the chelating ability of drugs with zinc ions, the chelating ability was estimated from the electrode potential change of the Zn2+/Zn(Hg) system during the addition of a drug. The electrode potential was measured in a water-N,N-dimethylformamide mixed solution and in an aqueous solution depending on the solubility of the drugs. The observed electrode potential change showed a positive correlation to the frequency of the drug-induced taste disorder that was supplied from the manufacturer of the original drug. The regression analysis was carried out assuming that the frequency of the taste disorder and the electrode potential change was linear. The F-values, p-values, and R2-values were 4.29, 0.13, 0.589, and 4.15, 0.13, 0.580, respectively. The positive correlation between the drug-induced taste disorder and the electrode potential change appeared evident if the uncertainty in the frequency of the taste disorder was taken into consideration. Thus the assumption of the zinc ion chelating mechanism on the drug-induced disorder was also evident except for cisplatin. The frequency of the drug-induced taste disorder of bezafibrate was estimated to be 0.4--0.5 from the regression analysis.     

Metabolomic investigation of cholestasis in a rat model using ultra-performance liquid chromatography/tandem mass spectrometry

Metabolomics follows the changes in concentrations of endogenous metabolites, which may reflect various disease states as well as systemic responses to environmental, therapeutic, or genetic interventions. In this study, we applied metabolomic approaches to monitor dynamic changes in plasma and urine metabolites, and compared these metabolite profiles in Eisai hyperbilirubinemic rats (EHBR, an animal model of cholestasis) with those in the parent strain of EHBR - Sprague-Dawley (SD) rats - in order to characterize cholestasis pathophysiologically. Ultra-performance liquid chromatography/tandem mass spectrometry-based analytical methods were used to assay metabolite levels. More than 250 metabolites were detected in both plasma and urine, and metabolite profiles of EHBR differed from those of SD rats. The levels of antioxidative and cytoprotective metabolites, taurine and hypotaurine, were markedly increased in urine of EHBR. The levels of many bile acids were also elevated in plasma and urine of EHBR, but the extent of elevation depended on the particular bile acid. The levels of cytoprotective ursodeoxycholic acid and its conjugates were markedly elevated, while that of cytotoxic chenodeoxycholic acid remained unchanged, suggesting the balance of bile acids had shifted resulting in decreased toxicity. In EHBR, reduced biliary excretion leads to increased systemic exposure to harmful compounds including some endogenous metabolites. Our metabolomic data suggest that mechanisms exist in EHBR that compensate for cholestasis-related damage.