Diffusion Structural Analysis Study of Titania Films Deposited by Sol-Gel Technique on Silica Glass

The diffusion structural analysis (DSA) was used to characterize microstructure changes of hydrous titania gel films under in situ conditions of heating. TG and DTA were used in order to elucidate the processes controlling the formation of anatase film during heating of hydrous titania gel film. The annealing of porosity and near surface structure defects of the dehydrated titania films was indicated by DSA in the temperature range 255–700°C as the decrease of radon release rate. It was demonstrated that the annealing was enhanced on heating in oxygen in comparison with heating in argon. The DSA experimental results were compared with model curves describing the radon diffusion mobility and the annealing of radon diffusion paths.     

Anisotropic friction model of DNA electrophoresis in polymer solutions: Comparison with direct observations

The electrophoresis of DNA chains in uncrosslinked polymer solutions with a Brownian dynamics simulation with an anisotropic friction tensor was analyzed. According to the degree of anisotropy, three types of migration behavior are obtained: fluctuation without or with periodicity between U‐shaped and compact conformations, or migration with linear conformation. We found good agreement between our simulation results and the direct observations of DNA by fluorescence microscopy. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1316–1322, 2003     

Emanation Thermal Analysis of SiC Based Materials

Results of emanation thermal analysis (ETA) characterizing microstructure changes of SiC based materials during heat treatment in argon are demonstrated. This method made it possible to reveal fine changes of the texture of SiC nano-sized powders, SiC micro-sized powders and SiC whiskers under in situconditions of the heating. ETA curves can serve as fingerprints of the respective samples.This revised version was published online in November 2005 with corrections to the Cover Date.     

Cross-metathesis of vinyl aromatic heterocycles with 1-octene in the presence of a Schrock catalyst

Metathesis of 2-vinyl aromatic heterocycles such as furan, thiophene, pyrrole and pyridine in the presence of a molybdenum-based Schrock catalyst has been investigated from a synthetic point of view. The self-metathesis of 2-vinyl aromatic heterocycles was not successful. However, in cross-metathesis of thiophene, furan and styrene with 1-octene, the cross-metathesis product, heterodimer, was readily obtained selectively, together with only small amounts of the two corresponding self-metathesis products. The origin of the surprisingly high selectivity of heterodimer formation was elucidated through metallacyclobutane intermediate mechanism, observations of carbenes by in situ ¹H NMR, and reaction products.     

Synthesis of pyrido[1′,2′:1,2]imidazo[4,5-b]pyrazines from 2,3-dichloro-5,6-dicyanopyrazine with 2-aminopyridines

Novel synthesis of the title compounds by the facile cyclization between 2,3-dichloro-5,6-dicyanopyrazine and various 2-aminopyridines under relatively mild conditions is described. The reactivity depended on the basicity of 2-aminopyridines.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

A simple and stereoselective synthesis of 7-azabicyclo[2.2.1]-heptane-1,2,3,4-tetracarboxylates

The photoinitiated reaction of 1,1′-bis(methoxycarbonyl)divinylamine with various maleates and fumarates afforded novel 7-azabicyclo[2.2.1]heptane-1,2,3,4-tetracarboxylates. The spectral investigation of the products showed that the reaction proceeded stereoselectively, retaining the original configuration of the reagents.     

A catalytic chemical vapor deposition synthesis of double-walled carbon nanotubes over metal catalysts supported on a mesoporous material

Double-walled carbon nanotubes (DWNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) over supported metal catalysts decomposed from Fe(CH₃COO)₂ and Co(CH₃COO)₂ on mesoporous silica. Bundles of tubes with relatively high percentage of DWNTs, in areas where tubular layered structures could be clearly resolved, have been observed by transmission electron microscopy (TEM). In other areas, crystal-like alignment of very uniform DWNTs was observed for the first time, suggesting that mesoporous silica might play a templating role in guiding the initial nanotube growth. In addition, compatible with nano-electronics research, bridging of catalytic islands by DWNTs has also been demonstrated.     

An improvement in the bending ability of a hinged trisaccharide with the assistance of a sugar-sugar interaction

Hinged di- and trisaccharides incorporating 2,4-diamino-beta-D-xylopyranoside as a hinge unit (Hin) were synthesized. Bridging of the diamino group of Hin by carbonylation or chelation to a metal ion results in a conformational change from (4)C1 to (1)C4, which in turn causes a bending of the oligosaccharides. In this study, the bending abilities of the hinged oligosaccharides were compared, in terms of the reactivities toward carbonylation and chelation. Di- or trisaccharides containing a 6-O-glycosylated mannopyranoside or galactopyranoside at their reducing ends had bending abilities similar to that of the Hin monosaccharide, probably because there were neither attractive nor repulsive interactions between the reducing and nonreducing ends. However, when Hin was attached at O2 of methyl mannopyranoside (Man alphaMe), the bending ability was dependent on the nonreducing sugar and the reaction conditions. Typically, a disaccharide--Hin beta(1,2)Man alphaMe--was difficult to bend under all the tested reaction conditions, and the bent population in the presence of Zn(II) was only 4%. On the other hand, a trisaccharide--Man alpha(1,3)Hin beta(1,2)Man alphaMe--was bent immediately after the addition of Zn(II) or Hg(II), and the bent population reached 75%, much larger than those of all the other hinged trisaccharides ever tested (<40%). This excellent bending ability suggests an attractive interaction between the reducing and nonreducing ends. The extended conformation was recovered by the addition of triethylenetetramine, a metal ion chelator. Reversible, quick, and efficient bending of the hinged trisaccharide was thus achieved.     

Improved method for the determination of kynurenic acid in rat plasma by column-switching HPLC with post-column fluorescence detection

Kynurenic acid (KYNA), an endogenous antagonist of ionotropic glutamate and α7 nicotinic receptors, was fluorometrically determined by column-switching high-performance liquid chromatography (HPLC) with fluorescence detection. The HPLC system consists of two octadecyl silica (ODS) columns, both of which are connected with an anion-exchange column (trapping column). Following sample injection onto the HPLC column, KYNA was separated on the first ODS column with a mobile phase of H₂O/acetonitrile (95/5) containing 0.1% acetic acid. The peak fraction of KYNA was trapped on the anion-exchange column by changing the position of a six-port valve and then introduced into the second ODS column. Subsequently, KYNA was detected fluorometrically as a fluorescence complex formed with zinc ion which was pumped constantly. Instrumental limit of detection was approximately 0.16 nM, which corresponded to 8.0 fmol (per 50 μl injection, signal to noise ratio 3), and the limit of quantification was 0.53 nM (signal to noise ratio 10). Intra- and inter-day relative standard deviations were 1.1-3.9% (n = 3) and 3.0-5.3% (n = 3), respectively. The peak of KYNA in rat plasma was clearly detected by the proposed column-switching HPLC system after a facile pretreatment procedure. Intra- and inter-day relative mean errors were −1.6-1.4% (n = 3) and −2.4 to −0.4% (n = 3), respectively, with a satisfactory precision (within 5.0%). A calibration curve for the determination of KYNA showed a good linearity (r² > 0.999) in the range of 25-200 nM. The KYNA concentrations in the plasma of male Sprague-Dawley rats (8-week-old) were 44 ± 5.5 nM (mean ± S.E., n = 5). In ketamine-treated rats, which are animal models of schizophrenia, the plasma KYNA concentrations were significantly increased compared with those in the control rats (p < 0.05).