Distribution of polymer deposition in plasma polymerization. III. Effect of discharge power

Distribution of polymer deposition in an inductively coupled rf discharge system is studied as a function of level of discharge power with acetylene and styrene as monomers. When a fixed flow rate is used, the discharge power has a relatively small effect on the pattern of distribution of polymer deposition as long as values of W/FM, where W is discharge wattage, F is flow rate, and M is molecular weight of monomer, are maintained above a critical level to maintain full glow in the reaction tube. It has been shown that plasma polymerization of two monomers which have different molecular weights can be compared in a fair manner by selecting conditions to yield similar value of W/FM.     

A novel method for atomic absorption spectroscopy based on the analyte-Zeeman effect

A new type of atomic absorption spectrometry using the Zeeman effect of sample materials is proposed. A magnetic field was applied to the sample vapor in the direction perpendicular to the propagation of light emitted from an atomic spectral source. Absorption of radiation polarized perpendicular and parallel to the magnetic field was observed alternatively. The absorption difference was proportional to the true atomic absorption, and was not interfered with by any other molecular absorption and light scattering, i.e., background absorption. The background absorption could be monitored at exactly the same wavelength as an atomic absorption line. Suitable magnetic field strength was found for each line of the various elements.     

Some aspects of plasma polymerization investigated by pulsed R.F. discharge

The polymerization of organic compounds in glow discharge (plasma polymerization) was investigated by using pulsed R.F. discharge (100 μsec on, 900 μsec off). The effects of pulsed discharge on polymer deposition rate, pressure change in plasma, ESR signals of free spins in both plasma polymer and substrate, and the contact angle of water on the plasma polymer surface were investigated for various organic compounds. The results are correlated to the mechanisms of polymer formation in plasma (plasma polymerization) which has been postulated as repeating processes of stepwise (propagation) reactions. The effect of the pulse is different from one group of organic compounds to another depending on whether or not they contain an olefinic double bond and/or a triple bond. The main difference seems to be the addition polymerization which can occur exclusively during the off-period of pulsed discharge. Ultraviolet emission from pulsed discharge is much less than from continuous discharge. Consequently, the fragmentation of the monomer and the free-radical formation in the substrate are less with the pulsed discharge. Properties of polymers from some organic compounds formed in continuous and in pulsed discharge were found to be significantly different, and the differences were postulated from the changes of polymerization mechanisms in the pulsed discharge.     

Some aspects of plasma copolymerization of acetylene with N2 and/or water

Plasma polymerizations of mixture of acetylene-N₂, acetylene-H₂O, were investigated by using an electrodeless glow discharge from a 13.5-MHz radiofrequency source. Properties of plasma polymers were examined as functions of mole ratios of N₂ and/or H₂O to acetylene. The concentration of trapped free radicals and the internal stress in a plasma polymer decreased as the mole ratio of N₂ or H₂O increased. Water showed the most pronounced effects in those properties at the mole ratio of 0.3. Gas permeabilities increased by the copolymerization of N₂ and/or H₂O. Surface energies were also investigated by analysis of contact angles of liquids. Copolymerization of N₂ caused a remarkable increase in polar contribution of surface energy. Some fundamental aspects of flow-rate pressure relationship of mixed gases are presented.     

Photon number squeezing of ultrabroadband laser pulses generated by microstructure fibers

To the best of our knowledge, we demonstrate for the first time the generation of photon number squeezing by spectral filtering for ultrabroadband light generated by microstructure fibers at 800 nm. A maximum squeezing of 4.6 dB is observed, corresponding to 10.3 dB after correcting for detection losses. We numerically analyzed the quantum dynamics of ultrashort laser pulse propagation through optical fibers by solving a nonlinear quantum Schr?dinger equation that included Raman scattering, especially for the quantum correlation of photon number fluctuation among frequency modes in broadband pulses.     

Coaxial holographic data storage without recording the dc components

A technique of recovering the data pages from Fourier holograms recorded without the dc components is demonstrated theoretically and experimentally by use of a coaxial holographic storage system. A reconstructed image is obtained by adding a phase-modulated dc component of the signal beam on reading. The bit error rate of the reconstructed image is comparable with that for the hologram recorded with the dc component as well. Since high intensities of the dc components are not recorded in this technique, the dynamic range of the recording media can be saved, which potentially contributes to increasing the number of multiplexed holograms.     

The effect of surface modification with silane coupling agent on suppressing the photo-catalytic activity of fine TiO2 particles as inorganic UV filter

The effect of surface modification with 3-aminopropyltriethoxysilane (APTES) and n-propyltriethoxysilane (PTES) on photo-catalytic activity and UV-shielding ability of fine TiO₂ particles were investigated. The number of surface groups (N_R) [nm⁻²] which shows the density of modifier on TiO₂ surface was calculated from the results of elemental analysis and BET measurement. The modified samples of which N_R are different were obtained by changing the concentration of modifier. When the photo-catalytic activity and UV-shielding ability of modified samples were evaluated, it was found that APTES was more effective modifier than PTES to obtained samples with low photo-catalytic activity and high UV-shielding ability. This is probably because the adsorption mechanisms on TiO₂ surface between modifiers were different and N_R is a key factor to control the performances of fine TiO₂ particles. The result of zeta potential showed that surface character of modified samples was varied by changing N_R. It suggested from these results that N_R affected the photo-catalytic activity and UV-shielding ability because N_R changed surface character of modified samples.     

Isotopic dependence of the giant monopole resonance in the even-A 112-124Sn isotopes and the asymmetry term in nuclear incompressibility

The strength distributions of the giant monopole resonance (GMR) have been measured in the even-A Sn isotopes (A=112-124) with inelastic scattering of 400-MeV alpha particles in the angular range 0 degrees -8.5 degrees . We find that the experimentally observed GMR energies of the Sn isotopes are lower than the values predicted by theoretical calculations that reproduce the GMR energies in 208Pb and 90Zr very well. From the GMR data, a value of Ktau = -550 +/- 100 MeV is obtained for the asymmetry term in the nuclear incompressibility.     

Néel temperature of quasi-low-dimensional Heisenberg antiferromagnets

The Néel temperature T(N) of quasi-one- and quasi-two-dimensional antiferromagnetic Heisenberg models on a cubic lattice is calculated by Monte Carlo simulations as a function of interchain (interlayer) to intrachain (intralayer) coupling J(')/J down to J(')/J approximately = 10(-3). We find that T(N) obeys a modified random-phase approximationlike relation for small J(')/J with an effective universal renormalized coordination number, independent of the size of the spin. Empirical formulas describing T(N) for a wide range of J(') and useful for the analysis of experimental measurements are presented.