Supramolecular Luminescent Lanthanide Dimers for Fluoride Sequestering and Sensing

Lanthanide complexes (Ln=Eu, Tb, and Yb) that are based on a C₂‐symmetric cyclen scaffold were prepared and characterized. The addition of fluoride anions to aqueous solutions of the complexes resulted in the formation of dinuclear supramolecular compounds in which the anion is confined into the cavity that is formed by the two complexes. The supramolecular assembly process was monitored by UV/Vis absorption, luminescence, and NMR spectroscopy and high‐resolution mass spectrometry. The X‐ray crystal structure of the europium dimer revealed that the architecture of the scaffold is stabilized by synergistic effects of the Eu? F? Eu bridging motive, π stacking interactions, and a four‐component hydrogen‐bonding network, which control the assembly of the two [EuL] entities around the fluoride ion. The strong association in water allowed for the luminescence sensing of fluoride down to a detection limit of 24 nM .     

Nonlinear resonant ultrasound spectroscopy (NRUS) applied to damage assessment in bone

Nonlinear resonant ultrasound spectroscopy (NRUS) is a resonance-based technique exploiting the significant nonlinear behavior of damaged materials. In NRUS, the resonant frequency(ies) of an object is studied as a function of the excitation level. As the excitation level increases, the elastic nonlinearity is manifest by a shift in the resonance frequency. This study shows the feasibility of this technique for application to damage assessment in bone. Two samples of bovine cortical bone were subjected to progressive damage induced by application of mechanical cycling. Before cycling commenced, and at each step in the cycling process, NRUS was applied for damage assessment. For independent assessment of damage, high-energy x-ray computed tomography imaging was performed but was only useful in identifying the prominent cracks. As the integral quantity of damage increased, NRUS revealed a corresponding increase in the nonlinear response. The measured change in nonlinear response is much more sensitive than the change in linear modulus. The results suggest that NRUS could be a potential tool for micro-damage assessment in bone. Further work must be carried out for a better understanding of the physical nature of damaged bone and for the ultimate goal of the challenging in vivo implementation of the technique.     

One-pot preparation and uranyl adsorption properties of hierarchically porous zirconium titanium oxide beads using phase separation processes to vary macropore morphology

A simple and engineering friendly one-step process has been used to prepare zirconium titanium mixed oxide beads with porosity on multiple length scales. In this facile synthesis, the bead diameter and the macroporosity can be conveniently controlled through minor alterations in the synthesis conditions. The precursor solution consisted of poly(acrylonitrile) dissolved in dimethyl sulfoxide to which was added block copolymer Pluronic F127 and metal alkoxides. The millimeter-sized spheres were fabricated with differing macropore dimensions and morphology through dropwise addition of the precursor solution into a gelation bath consisting of water (H(2)O beads) or liquid nitrogen (LN(2) beads). The inorganic beads obtained after calcination (550 °C in air) had surface areas of 140 and 128 m(2) g(-1), respectively, and had varied pore architectures. The H(2)O-derived beads had much larger macropores (5.7 μm) and smaller mesopores (6.3 nm) compared with the LN(2)-derived beads (0.8 μm and 24 nm, respectively). Pluronic F127 was an important addition to the precursor solution, as it resulted in increased surface area, pore volume, and compressive yield point. From nonambient XRD analysis, it was concluded that the zirconium and titanium were homogeneously mixed within the oxide. The beads were analyzed for surface accessibility and adsorption rate by monitoring the uptake of uranyl species from solution. The macropore diameter and morphology greatly impacted surface accessibility. Beads with larger macropores reached adsorption equilibrium much faster than the beads with a more tortuous macropore network.     

Ultrasonically determined thickness of long cortical bones: Three-dimensional simulations of in vitro experiments

It was reported in a previous study that simulated guided wave axial transmission velocities on two-dimensional (2D) numerically reproduced geometry of long bones predicted moderately real in vitro ultrasound data on the same bone samples. It was also shown that fitting of ultrasound velocity with simple analytical model yielded a precise estimate (UTh) for true cortical bone thickness. This current study expands the 2D bone model into three dimensions (3D). To this end, wave velocities and UTh were determined from experiments and from time-domain finite-difference simulations of wave propagation, both performed on a collection of 10 human radii (29 measurement sites). A 3D numerical bone model was developed with tuneable fixed material properties and individualized geometry based on X-ray computed tomography reconstructions of real bones. Simulated UTh data were in good accordance (root-mean-square error was 0.40 mm; r(2)=0.79, p<0.001) with true cortical thickness, and hence the measured phase velocity can be well estimated by using a simple analytical inversion model also in 3D. Prediction of in vitro data was improved significantly (by 10% units) and the upgraded bone model thus explained most of the variability (up to 95% when sites were carefully matched) observed in in vitro ultrasound data.     

Effect of porosity on effective diagonal stiffness coefficients (cii) and elastic anisotropy of cortical bone at 1 MHz: a finite-difference time domain study

Finite-difference time domain (FDTD) numerical simulations coupled to real experimental data were used to investigate the propagation of 1 MHz pure bulk wave propagation through models of cortical bone microstructures. Bone microstructures were reconstructed from three-dimensional high resolution synchrotron radiation microcomputed tomography (SR-muCT) data sets. Because the bone matrix elastic properties were incompletely documented, several assumptions were made. Four built-in bone matrix models characterized by four different anisotropy ratios but the same Poisson's ratios were tested. Combining them with the reconstructed microstructures in the FDTD computations, effective stiffness coefficients were derived from simulated bulk-wave velocity measurements. For all the models, all the effective compression and shear bulk wave velocities were found to decrease when porosity increases. However, the trend was weaker in the axial direction compared to the transverse directions, contributing to the increase of the effective anisotropy. On the other hand, it was shown that the initial Poisson's ratio value may substantially affect the variations of the effective stiffness coefficients. The present study can be used to elaborate sophisticated macroscopic computational bone models incorporating realistic CT-based macroscopic bone structures and effective elastic properties derived from muCT-based FDTD simulations including the cortical porosity effect.     

Coordination Chemistry‐Assembled Multicomponent Systems Built from a Gable‐Like Bis‐Porphyrin: Synthesis and Photophysical Properties

Multiporphyrinic assemblies were quantitatively formed, in one step, from a gable‐like zinc(II) bis‐porphyrin ZnP₂ and free‐base porphyrins bearing pyridyl groups. The different fragments are held together by axial 4′‐N(pyridyl)–Zn interactions. Formation of a macrocycle ZnP₂?(4′‐cisDPyP) and a bis‐macrocycle (ZnP₂)₂?(TPyP) is discussed. The macrocycle and the bis‐macrocycle were crystallized and studied by X‐ray diffraction, which confirmed the excellent complementarity between the various components. Spectrophotometric and spectrofluorimetric titrations and studies reveal high association constants for both multiporphyrinic assemblies due to the almost perfect geometrical match between the interacting units. As expected, energy transfer from the zinc porphyrin component to the free‐base porphyrin quenches the fluorescence of the zinc porphyrin components in both compounds. But while in ZnP₂?(4′‐cis DPyP) sensitization of the emission of the free‐base porphyrin was observed, in (ZnP₂)₂?(TPyP) excitation of the peripheral Zn porphyrin units does not lead to quantitative sensitization of the luminescence of the free‐base porphyrin acceptor. An unusual HOMO–HOMO electron transfer reaction from ZnP₂ to the excited TPyP unit was detected and studied.     

Quantitative formation of a tetraporphyrin [2]catenane via copper and zinc coordination

A [2]catenane is formed quantitatively by mixing substituted 1,10-phenanthroline-based chelates with copper(I) acting as central template, the ring-forming reaction being based on the coordination of pyridinic bidentate ligands onto the zinc atoms of the four porphyrins surrounding the core of the molecule.     

Improved microwave steam distillation apparatus for isolation of essential oils. Comparison with conventional steam distillation

Steam distillation (SD) is routinely used by analysts for the isolation of essential oils from herbs, flowers and spices prior to gas chromatographic analysis. In this work, a new process design and operation for an improved microwave steam distillation (MSD) of essential oils from aromatic natural products was developed. To demonstrate its feasibility, MSD was compared with the conventional technique, SD, for the analysis of volatile compounds from dry lavender flowers (Lavandula angustifolia Mill., Lamiaceae). Essential oils isolated by MSD were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained by SD, but MSD was better than SD in terms of rapidity (6 min versus 30 min for lavender flowers), thereby allowing substantial savings of costs in terms of time and energy. Lavender flowers treated by MSD and SD were observed by scanning electron microscopy. Micrographs provide evidence of more rapid opening of essential oil glands treated by MSD, in contrast to conventional SD.     

Redox Non‐Innocence of Nitrosobenzene at Nickel

Nitrosobenzene (PhNO) serves as a stable analogue of nitroxyl (HNO), a biologically relevant, redox‐active nitric oxide derivative. Capture of nitrosobenzene at the electron‐deficient β‐diketiminato nickel(I) complex [ⁱPr₂NN_F6]Ni results in reduction of the PhNO ligand to a (PhNO)^./? species coordinated to a square planar Ni^II center in [ⁱPr₂NN_F6]Ni(η²‐ONPh). Ligand centered reduction leads to the (PhNO)^2? moiety bound to Ni^II supported by XAS studies. Systematic investigation of structure–reactivity patterns of (PhNO)^./? and (PhNO)^2? ligands reveals parallels with superoxo (O₂)^./? and peroxo (O₂)^2? ligands, respectively, and forecasts reactivity patterns of the more transient HNO ligand.