Corrosion on prehistoric Cu–Sn-alloys: the influence of artificial environment and storage

The paper contributes to the identification of different corrosion products detected on the cross-section specimens sampled from Bronze Age swords and one helmet found between 60–160 years ago. The objects are kept in 1889 built oak showcases at the Natural History Museum Vienna, having suffered unknown restoration treatments. The identified corrosion products not only affect further eventual treatment in conservation science of copper base objects but also contribute to identify the often unknown find context, which is meant to facilitate archaeological interpretation of the Bronze Age weapons. The analyses of the samples were carried out using SEM-EDXS-EBSD and optical microscopy.     

Versatility of the dipolar filter selection: from 1H nuclear spin diffusion experiment to the measurement of nuclear Overhauser effect in homopolymer melts

Dipolar filters select ¹H magnetization according to local dipolar dephasing, which corresponds to site mobility in systems with heterogeneous molecular mobility. Combined with a conventional exchange experiment, it is usually applied to polymeric samples exhibiting structures on the nanometer length scale associated with a strong dynamic contrast. There, the resulting ¹H nuclear spin diffusion experiment yields the size of the structure. When the same experiment is applied to homopolymer melts exhibiting a weak dynamic contrast and dynamic heterogeneities on significant shorter length scales, the recorded magnetization decay is in agreement with decays expected from a heterogeneous nanostructure. However, dipolar filters actually can also select mobile parts of the repeat unit, e.g. the end of the alkyl side chains and the subsequent magnetization transfer then can occur via cross relaxation due to non coherent zero-quantum transitions (nuclear Overhauser effect, NOE). The difficulties of distinguishing these two cases are examined and it is demonstrated that NOE experiments exploiting magnetization selection via the dipolar filter allow quantifying the local dynamics of the side chains. This opens new possibilities for measurements of local dynamics in non isotopically labeled homopolymer melts.     

On applicability of PCA,voxel-wise variance normalization and dimensionality assumptions for sliding temporal window sICA in resting-state fMRI

Subject-level resting-state fMRI (RS-fMRI) spatial independent component analysis (sICA) may provide new ways to analyze the data when performed in the sliding time window. However, whether principal component analysis (PCA) and voxel-wise variance normalization (VN) are applicable pre-processing procedures in the sliding-window context, as they are for regular sICA, has not been addressed so far. Also model order selection requires further studies concerning sliding-window sICA. In this paper we have addressed these concerns. First, we compared PCA-retained subspaces concerning overlapping parts of consecutive temporal windows to answer whether in-window PCA and VN can confound comparisons between sICA analyses in consecutive windows. Second, we compared the PCA subspaces between windowed and full data to assess expected comparability between windowed and full-data sICA results. Third, temporal evolution of dimensionality estimates in RS-fMRI data sets was monitored to identify potential challenges in model order selection in a sliding-window sICA context. Our results illustrate that in-window VN can be safely used, in-window PCA is applicable with most window widths and that comparisons between windowed and full data should not be performed from a subspace similarity point of view. In addition, our studies on dimensionality estimates demonstrated that there are sustained, periodic and very case-specific changes in signal-to-noise ratio within RS-fMRI data sets. Consequently, dimensionality estimation is needed for well-founded model order determination in the sliding-window case. The observed periodic changes correspond to a frequency band of ≤ 0.1 Hz, which is commonly associated with brain activity in RS-fMRI and become on average most pronounced at window widths of 80 and 60 time points (144 and 108 s, respectively). Wider windows provided only slightly better comparability between consecutive windows, and 60 time point or shorter windows also provided the best comparability with full-data results. Further studies are needed to determine the cause for dimensionality variations.     

Generation and characterization of stable, highly concentrated titanium dioxide nanoparticle aerosols for rodent inhalation studies

The intensive use of nano-sized titanium dioxide (TiO₂) particles in many different applications necessitates studies on their risk assessment as there are still open questions on their safe handling and utilization. For reliable risk assessment, the interaction of TiO₂ nanoparticles (NP) with biological systems ideally needs to be investigated using physico-chemically uniform and well-characterized NP. In this article, we describe the reproducible production of TiO₂ NP aerosols using spark ignition technology. Because currently no data are available on inhaled NP in the 10?C50 nm diameter range, the emphasis was to generate NP as small as 20 nm for inhalation studies in rodents. For anticipated in vivo dosimetry analyses, TiO₂ NP were radiolabeled with ⁴⁸V by proton irradiation of the titanium electrodes of the spark generator. The dissolution rate of the ⁴⁸V label was about 1% within the first day. The highly concentrated, polydisperse TiO₂ NP aerosol (3?C6 × 10⁶ cm^?3) proved to be constant over several hours in terms of its count median mobility diameter, its geometric standard deviation, and number concentration. Extensive characterization of NP chemical composition, physical structure, morphology, and specific surface area was performed. The originally generated amorphous TiO₂ NP were converted into crystalline anatase TiO₂ NP by thermal annealing at 950 °C. Both crystalline and amorphous 20-nm TiO₂ NP were chain agglomerated/aggregated, consisting of primary particles in the range of 5 nm. Disintegration of the deposited TiO₂ NP in lung tissue was not detectable within 24 h.     

Sauna,sweat and science II – do we sweat what we drink?

ABSTRACT

Inspired by a previous ‘Sauna, sweat and science’ study [Zech et al. Isot Environ Health Stud. 2015;51(3):439–447] and out of curiosity and enthusiasm for stable isotope and sauna research we aimed at answering the question ‘do we sweat (isotopically) what we drink’? We, therefore, pulse-labelled five test persons in a sauna experiment with beverages that were ²H-enriched at about +25,600?‰. Sweat samples were collected during six sauna rounds and the hydrogen isotope composition δ²H_sweat was determined using an isotope ratio mass spectrometer. Before pulse labelling, δ²H_sweat – reflecting by approximation body water – ranged from –32 to –22?‰. This is ～35?‰ enriched compared to usual mid-European drinking water and can be explained with hydrogen-bearing food as well as with the respiratory loss of ²H-depleted vapour. The absence of a clearly detectable ²H pulse in sweat after pulse labelling and δ²H_sweat results of ≤+250?‰ due to a fast ²H equilibration with body water are moreover a clearly negative answer to our research question also in a short-term consideration. Given that the recovery of the tracer based on an isotope mass balance calculation is clearly below 100?%, we finally answer the question ‘where did the rest of the tracer go?’     

Fiber crystal growth from the melt for non-linear optical applications

During several years, we have been involved in the growth and characterization of non-linear optical crystals by the two most common techniques for growing single-crystal fibers from the melt: laser-heated pedestal growth and micro-pulling down. Their specific features are presented in this study and their versatility is demonstrated through two typical examples of incongruently melting materials: K₃Li_2?xNb_5+xO_15+2x (solid solution of the ternary system K₂O–Li₂O–Nb₂O₅) and Ca₅(BO₃)₃F which can only be grown from a flux.     

Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

Efficient approach to high barrier packaging using microfibrillar cellulose and shellac

This paper presents an investigation on the enhancement of the barrier properties of paperboard and paper. Microfibrillar cellulose (MFC) and shellac were deposited on the fibre based substrates using a bar coater or a spray coating technique. The air, oxygen and water vapour permeability properties were measured to quantify the barrier effect of the applied coatings. In addition, the mechanical properties were determined and image analysis of the structure was performed to examine the coating adhesion. The air permeance of the paperboard and papers was substantially decreased with a multilayer coating of MFC and shellac. Furthermore, for the MFC and shellac coated papers, the oxygen transmission rate decreased several logarithmic units and the water vapour transmission rate reached values considered as high barrier in food packaging (6.5 g/m² 24 h). The analysis of mechanical and morphological properties indicated good adhesion between the coating and the base substrate.     

Als ein neues Reagens auf Phlorogluzin, Katechin und ihre Derivate

Ohne Zusammenfassung     

Physicochemical Investigations on the Interaction of Surfactants and Salts with Polyvinylpyrrolidone in Aqueous Medium

Microcalorimetric investigations have been carried out onthe interaction of the surfactants sodium cholate, sodium deoxycholate, tetradecyltrimethylammonium bromide, cetyl(hexadecyl)trimethylammonium bromide, and p-tert-octylphenoxy polyoxy-ethylene ether (Triton X-100) and the salts potassium iodide, sodium benzoate, sodium bromide, and sodium salicylate with the neutral polymer polyvinylpyrrolidone (PVP). The enthalpy of dilution of the surfactants has been measured in the absence and presence of the polymer and the results are compared to determine the effect of PVP on the micellization of the surfactants and the energetics of the process. As well, the micellization activity of the surfactants in the presence of the polymer has been studied by conductometric and fluorimetric methods. The enthalpy of dilution of the salts has been measured to provide an understanding of the nature and magnitude of their interaction with PVP. Copyright 2001 Academic Press.