Partitioning of metals between the aqueous phase and suspended insoluble material in fog droplets

This paper discusses the partitioning of metals (K, Na, Ca, Mg, Al, Cu, Fe, Pb and Zn) between the aqueous phase and the suspended insoluble material in fog samples collected in the Po Valley during two extensive fields campaigns. Metals represent on average 11% of the mass of suspended insoluble matter, while the main component is carbon (both organic carbon, OC = 35%, and black carbon, BC = 8%). The unaccounted suspended matter mass is very high, on average 46%, and is attributable to non metallic species, such as O and N and of Si. The principal metals in the insoluble suspended fraction are Fe and Al (2-5%), while the contributions of other metals (Na, Mg, Cu, Pb and Zn) are lower than 1%. Ca and K exhibited high blank values and could not be detected above blank detection limit threshold. The main components in the aqueous phase are NO3- (34%), WSOC (23%), SO4(2-) (18%) and NH4+ (19%), while trace metals and remaining cations and anions accounted for less than 1% of solute mass. The main dissolved trace metals in fog droplets are Zn, Al and Fe, while the main metallic cations are Na and Ca. Fe and Al are the only metals preferentially distributed in the suspended insoluble matter of fog droplets (partitioning ratio respectively 37% and 33%). All other metals are mostly dissolved in the aqueous phase (mean partitioning ratios of Mg, Pb, Zn, Cu and Na are 69%, 70%, 77%, 81% and 87%). These findings are in agreement with literature data on metal speciation in cloud and rain samples. The dependence of partitioning ratios on pH is investigated for the different metals, with only Al showing a clear partitioning ratio decrease with increasing pH. Conversely, the other metals show no dependence or a complex and highly variable behaviour. The partitioning ratio of iron (mean 37%) observed in the Po Valley fog samples is much higher than the water extractable iron in aerosol particles (typically 1-2 %): this fact can be explained by differences in the aerosol sources and composition among sites and by chemical processes in the aqueous phase, such as complexation and redox reactions involving organic ligands (oxalate, or other organic acids as humic-like organic matter) which may promote Fe solubility.     

The Intramolecular Interaction of Thiophene and Furan with Aromatic and Fluoroaromatic Systems in Some [3.3]Meta(heterocyclo)paracyclophanes: A Combined Computational and NMR Spectroscopic Study

Four thiophene‐ and furan‐containing [3.3]meta(heterocyclo)paracyclophanes were designed and synthesized to study the intramolecular interaction between standard heteroaromatic rings and tetra‐H‐ or tetra‐F‐substituted benzenes. A complete conformational analysis, carried out by DFT calculations and variable‐temperature NMR techniques, showed that, despite their structural similarity, these adducts have different conformational preferences and undergo different types of isomerizations depending on the nature of the heterocycle. The thiophene‐derived adducts adopted a parallel stacked arrangement of the aromatic systems in the ground‐state conformations. Their isomerization pathways involved a thiophene ring‐flip process passing through an edge‐to‐face arranged transition state in which the heterocycle is perpendicular to the benzene platform and its sulfur atom points toward the center of that ring. The threshold energy barrier to the ring‐flip process was higher by 10 kJ mol^?1 in the case of the adduct featuring the perfluorinated benzene. This difference was rationalized by assuming that the ground‐state conformations of the H‐ and F‐substituted compounds have different stability. On the contrary, the furan‐derived adducts were shown by calculations and NMR spectroscopy to adopt, in their ground‐state conformations, a perpendicular edge‐to‐face disposition of the rings with the oxygen atom pointing toward the benzene platform. The adoption of this arrangement was confirmed by X‐ray crystallography. In the case of these compounds, the isomerization process involved distortion of the CH₂SCH₂ bridges connecting the aromatic systems and the adoption of transition‐state geometries for which the rings were arranged in a parallel‐stacked orientation. Once again a very nice agreement was observed between the predicted and the experimentally determined geometries and pathways. In the case of the furan‐containing compounds, the threshold barriers were found to be much lower in energy that those observed for the thiophene derivatives. Remarkably, they were virtually independent of the presence of fluorine atoms on the platform benzene ring.     

Numerical stability analysis of submerged slopes subject to rapid sedimentation processes

In this paper, the stability of infinitely long submerged slopes subject to rapid sedimentation processes is theoretically/numerically investigated. In particular, rapid deposition is considered as a potential triggering factor for static liquefaction in inclined loose sand layers. The corresponding initial boundary value problem is numerically analysed by employing a one-dimensional finite difference scheme in conjunction with two distinct versions of the same constitutive model—elasto-plastic and elasto-viscoplastic (EV). The EV approach is shown to be the most suitable for describing the onset of liquefaction phenomena, since its mathematical well-posedness and numerical stability are never lost. The results of parametric analyses for both homogeneous and inhomogeneous strata are critically discussed in the light of some case history data concerning natural and anthropic sedimentation processes.     

High-performance liquid chromatographic evaluation of Med 15 and its metabolites Med 5 and tolmetin in rat plasma.

A simple and reliable high-performance liquid chromatographic method is described for the quantitative analysis of the new non-steroidal anti-inflammatory agent Med 15 and its metabolites Med 5 and tolmetin in rat plasma. After selective extraction the three analytes and an internal standard (p-phenyl-phenol) were separated on a reversed-phase Ultrasphere 5 micron column using potassium dihydrogenphosphate (0.05 M)-acetonitrile (52:48) (pH 4.7) as the mobile phase. The analytes were detected at 313 nm; the sensitivity of the method proved to be 0.05 microgram/ml for all three compounds. The method has been applied to investigate Med 15 pharmacokinetics in rats.     

In vivo PHYTOCHROME-MEDIATED PERCEPTION OF REFLECTED LIGHT SIGNALS

The spectrophotometric assay of phytochrome in vivo in etiolated plant material was used to determine the effects of changes in reflected light on the state of the photoreceptor in etiolated seedlings exposed simultaneously to direct and reflected light. Changes in reflected light that were small in terms of the total (direct + reflected) radiation incident on the seedlings produced detectable changes in the state of phytochrome in vivo. The contribution of reflected light to the state of phytochrome in vertical organs was greater than expected from its low contribution to total incident light. These data from laboratory studies complement and are consistent with results of field studies on the effects of light reflected from neighboring vegetation on plant growth under natural radiation conditions.     

Influence of concentration and anion size on hydration of H+ ions and water structure

Neutron diffraction experiments with hydrogen isotope substitution on aqueous solutions of HCl and HBr have been performed at concentrations ranging from 1:17 to 1:83 solute per water molecules, at ambient conditions. Data are analyzed using the empirical potential structure refinement technique in order to extract information on both the ion hydration shells and the microscopic structure of the solvent. It is found that the influence of these solutes on the water structure is less concentration dependent than that of salts or hydroxides. Moreover protons readily form a strong H-bond with a water molecule upon solvation, at all proportions. The majority of them is also bonded via a longer bond to another water molecule, giving a prepeak in the g(OwOw). At high solute concentration, the second water molecule may be substituted by the counterion. In particular at solute concentrations of the order of 1:17 or higher, all protons have an anion within a distance of 4.5 A.     

Study of percolation and clustering in supercritical water-CO2 mixtures

The microscopic structure of supercritical water-CO(2) mixture is investigated by neutron diffraction experiments exploiting the isotopic HD substitution. The investigated water reach mixtures are in the liquidlike region of the phase diagram, according to the behavior of the radial distribution functions, yet a reduction of the average number of hydrogen bonds, compared to equivalent states of pure water, is found. As a consequence, the average dimension of water clusters is reduced and the system stays below the percolation threshold. These results, along with the shift of the main peaks of the site-site radial distribution functions, suggest that the excess volume in these supercritical mixtures is likely associated with the CO(2) solvation shell.     

Arylbiphenylene atropisomers: structure, conformation, stereodynamics, and absolute configuration

Anti and syn conformers, due to restricted sp(2)-sp(2) bond rotation, were detected in hindered 1,8-diarylbiphenylenes, the aryl moieties being phenyl groups bearing 0micron-alkyl substituents such as Me, Et, i-Pr, and t-Bu. By means of low-temperature NOE experiments, the corresponding structures were assigned and were found to be in agreement with the results of single-crystal X-ray diffraction. The interconversion barriers of these conformers were determined by line-shape simulation of the variable-temperature NMR spectra and the experimental values were reproduced satisfactorily by DFT calculations. In the case of the bulkiest aryl substituent investigated (i.e., 2-methylnaphthalene), the syn and anti atropisomers were stable enough as to be separated at ambient temperature. The two enantiomers (M,M and P,P) of the isomer anti were also isolated by enantioselective HPLC, and the theoretical interpretation of the corresponding CD spectrum allowed the absolute configuration to be assigned.