Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Mixed-Valent Heptairon Complex with a Ground-State Spin Value of S=12/2 Constructed from a Triiron Cluster Ligand

The anionic triiron(III) cluster ligand [Fe(III)(3)(μ(3)-O)(bpca)(2)Cl(4)(EtO)(2)](-) (1; Hbpca=bis(2-pyridylcarbonyl)amine) was prepared as a building block for constructing larger metal assemblies. This "metal cluster complex ligand" was used in the synthesis of the mixed-valent heptairon complex [Fe(II)(1)(2)(EtOH)(2)], which has a ground-state spin value of S=12/2.     

A Dodecalanthanide Wheel Supported by p‐tert‐Butylsulfonylcalix[4]arene

A dodecaholmium wheel of [Ho₁₂(L)₆(mal)₄(AcO)₄(H₂O)₁₄] ( 1 ; mal=malonate) was synthesized by using p‐tert‐butylsulfonylcalix[4]arene (H₄L) as a cluster‐forming ligand. The wheel consists of three fragments of mononuclear A^3? ([Ho(L)(mal)(H₂O)]^3?), trinuclear B^3? ([Ho(H₂O)₂(mal)(Ho(L)(AcO))₂]^3?), and C³⁺ ([Ho(H₂O)₂]³⁺), and an alternate arrangement of these fragments (A^3?? C³⁺? B^3?? C³⁺? A^3?? C³⁺? B^3?? C³⁺? ) results in a wheel structure. The longest and shortest diameters of the core were estimated to be 17.7562(16) and 13.6810(13) Å, respectively, and the saddle‐shaped molecule possesses a pocketlike cavity inside.     

Performance of throughout in-capillary derivatization capillary electrophoresis employing an on-line sample and run buffer loading device

We report on the effect on performance of varying the length of the capillary during throughout in-capillary derivatization (TICD) capillary electrophoresis (CE). Performance was evaluated by on-line coupling with a sample and CE runbuffer loading device that was newly introduced for this study. The device was assembled with a low cost using two 5 mm inner diameter (ID) disposable polyethylene syringes. First, a sequence was manually formed consisting of a 200 microL run buffer solution plug, a 100 microL sample plug and another 200 microL run buffer solution plug. Each plug was separated from its neighbor by a 100 microL air plug. When each plug reached the injection point where both a platinum-wire anode and the end of the separation capillary tube were located, 340 V/cm separation voltage (electrophoresis voltage) and 34 V/cm injection voltage were applied to the capillary for 3 s. Then the analytes were derivatized during migration in 50 microm ID capillaries filled with 2 mM o-phthalaldehyde (OPA)/N-acetylcysteine (NAC) in a 20 mM phosphate-borate buffer (pH 10), followed by separating and detecting of OPA derivatives by absorbance of 340 nm. Derivatization, separation, and detection were performed systematically using capillaries which varied in length from 5 to 80 cm. In the case of TICD-CE of a mixture containing 1 mM aspartic acid (Asp) and 20 mM m-nitorophenol (MNP) as a test solution, it was determined that peak area and peak width ratios of Asp to MNP did not depend on capillary length. Enantiomeric separations of DL-alanine (Ala) and Asp were examined using a run buffer consisting of a 45 microM beta-cyclodextrin (CD)-2 mM OPA/NAC-20 mM phosphate-borate buffer (pH 10). Even though the resolution of these enantiomeric pairs decreased with decreasing capillary length, as expected, the peaks corresponding to both enantiomeric amino acids were identified even when a 5 cm capillary was used. An 8-component amino acid mixture was also tested with 5 cm and 10 cm capillaries.     

Four new cycloartane glycosides from Aquilegia vulgaris

Four new cycloartane glycosides, named aquilegiosides G-J, were isolated from the dried aerial parts of Aquilegia vulgaris. Their structures were determined by spectroscopic analysis and chemical evidence.     

Low temperature synthesis and characterization of porous anatase TiO2 nanoparticles

An ethanol solution of Ti-peroxy compounds was prepared from the ethanol solution of titanium isopropoxide (Ti(O-iPr)4) and H2O2. Heating of the ethanol solution of the Ti-peroxy compounds at 348 K formed a Ti-peroxy gel, and heat treatment of the gel at 348 K for more than 6 h formed gels that consisted of anatase nanoparticles. The diameter of the anatase nanoparticles increased from 9 to 15 nm as the heating time increased from 6 to 48 h. According to the results of the N2 adsorption measurement, the anatase nanoparticles had micropores, and the specific surface area (SBET) was in the range of 254 to 438 m2/g. The particle size, lattice strain, specific surface area, and photocatalytic activity of the anatase nanoparticles can be regulated by the heating time of the Ti-peroxy gel at 348 K.     

Synthesis and properties of the first stable silylene-isocyanide complexes

The first stable silylene-isocyanide complexes, [Tbt(Mes)SiCNAr] (5 c: Ar=Tip, 5 d: Ar=Tbt, 5 e: Ar=Mes*; Tbt=2,4,6-tris[bis(trimethylsilyl)methyl]phenyl, Mes=mesityl, Tip=2,4,6-triisopropylphenyl, Mes*=2,4,6-tri-tert-butylphenyl) were successfully synthesized by the reaction of a kinetically stabilized disilene, [Tbt(Mes)Si=Si(Mes)Tbt] (1), with bulky isocyanides, ArNC (3c-e). The spectroscopic data of 5 c-e and theoretical calculations for a model molecule indicated that 5 c-e are not classical cumulative compounds but the first stable silylene-Lewis base complexes. The reactions of 5 c-e with triethylsilane and 1,3-dienes gave the corresponding silylene adducts, and they underwent isocyanide-exchange reactions in the presence of another isocyanide at room temperature. These results indicate dissociation of complexes 5 c-e to the corresponding silylene 2 and isocyanides 3 c-e under very mild conditions. The reaction of 5 c with methanol gave the MeOH adduct 16, [Tbt(Mes)SiHC(OMe)NTip], which has a hydrogen atom on the silicon atom. This regioselectivity can be explained in terms of the contribution of zwitterionic resonance structures D and E, which have an anion on the silicon atom. This result indicates that 5 c is not a classical cumulene having Si=C double bonds that should react with methanol to give adducts bearing a methoxyl group on the silicon atom. Although the reactions of 5 c-e with electrophilic reagents such as methanol, hydrogen chloride, and methyl iodide gave the formal silylene adducts, the studies on the reaction mechanism by trapping experiments and the observation of the intermediate suggested that the reaction mainly or partially proceeds by initial nucleophilic attack of the silicon atom, as is the case in the formation of 16 in the reaction of 5 c with methanol. It was revealed that 5 c-e show the nucleophilicity of the silicon atom, most likely resulting from the contribution of the zwitterionic resonance structures D and E.