Synthesis of fish scale derived hydroxyapatite silica propyl bis aminoethoxy ethane cuprous complex (HASPBAEECC) as a novel hybrid nano-catalyst for highly efficient synthesis of new benzimidazole-1,2,3-triazole hybrid analogues as antifungal agents

Molecular Diversity - The preparation, characterization and application of hydroxyapatite silica propyl bis aminoethoxy ethane cuprous complex (HASPBAEECC) as a novel hybrid nano-catalyst for...     

The Investigation of Bulk and Surface Polariton Modes in Ga1?xNxAs by Using Infrared Magneto Spectroscopy

We present and discuss infrared magnetoplasma reflectivity and surface polariton modes in Ga_1–xN_xAs. It assumed that the sample is characterized by a magnetoplasma dielectric tensor. Surface polariton dispersion for two component magnetoplasma was calculated from reflectivity spectra data. We detect transverse optic phonon of GaN sublattice in 470 cm^-1. The origin of sharp feature in p-polarization reflectivity about 300 cm^–1 as well as LO phonon frequency of GaAs sublattice is due to Brewster mode. An interesting feature of surface modes in Voigt geometry is nonreciprocalicity, which means that the frequency changes when the direction of propagation is reversed. Also, the infrared magnetoplasma reflectivity of GaNAs should be providing determination of the electrons and heavy holes effective mass and carrier's concentration.     

The effect of oxidation on physical properties of porous silicon layers for optical applications

In order to understand the optical loss mechanisms in porous silicon based waveguides, structural and optical studies have been performed. Scanning and transmission electron microscopic observations of porous silicon layers are obtained before and after an oxidation process at high temperature in wet O₂. Pore size and shape of heavily p-type doped Si wafers are estimated and correlated to the optical properties of the material before and after oxidation. The refractive index was measured and compared to that determined by the Bruggeman model.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Light scattering studies of copolymers. 1. Soluble hemoglobin--dextran complexes

Complexes between dextrans of different molar mass and bovine hemoglobin were synthesized by two different methods. In the alkylation method three and in the dialdehyde method, two hemoglobins are coupled on average to one dextran molecule. In both cases, the soluble hemoglobin-dextran complexes reversibly bind and release oxygen; the oxygen affinity is greater than that of free hemoglobin. Static and dynamic light scattering was used to determine the average molar mass M_u, the radius of gyration 〈S〉, and the hydrodynamic radius R_h of both the complexes and the single dextrans. Interpretation of these data is complicated due to the fact that the complexes are copolymers. When appropriate approximations are made, the results indicate that the complexes have a spherical shape and an internal structure of a multiple-chain network, where several dextrans are linked together by the hemoglobins. The number of single dextrans per complex increases as the molar mass of the single dextrans is decreased. The increment is greater in the dialdehyde than in the alkylation method. The probable reason is that in the dialdehyde method one hemoglobin can connect many dextrans simultaneously while in the alkylation method a hemoglobin is able to link maximally two dextrans. The ratio of the radius of gyration to the hydrodynamic radius decreases as the temperature is increased. This suggests a decrease of the solvent penetration length for the complexes and can be interpreted on the basis of the Deutsch-Felderhof theory for porous spheres. © 1994 John Wiley & Sons, Inc.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Theoretical investigation of effects of local cooling of a nozzle divergent section for controlling condensation shock in a supersonic two-phase flow of steam

In supersonic adiabatic two-phase flows of steam, under the influence of supersonic acceleration, the fluid loses its equilibrium conditions and becomes supersaturated. Following this condition and to restore the fluid to equilibrium, micro droplets of water form in the absence of any surface or foreign particles. This phenomenon is called homogeneous nucleation and the formed minute small droplets grow along the fluid flow path. The formation of these droplets and their growth causes the release of the latent heat of evaporation to the gas phase particularly in the nucleation region, and results in an increase in the flow pressure which is called the condensation shock. In this paper, and in continuation of the series of papers by the authors, in addition to analytically solving the adiabatic gas-liquid supersonic flow of steam in a convergent-divergent channel, a novel solution to controlling the undesired effects of this pressure rise (condensation shock) is presented. In the proposed method, with the help of cooling the divergent section of the nozzle, the analytical model for the 1D non-adiabatic two-phase steam flows is further developed which shows considerable decrease in the intensity of the formed condensation shock. Also the growth rate of the formed droplets due to the cooling of the steam flow has higher importance than the nucleation itself.     

The effect of starvation periods on the performance of a two-liquid-phase mixed tank bioreactor for removal of n-hexane from air streams

In this research the effect of silicone oil as a heavy organic solvent on the performance of a mixed tank bioreactor was investigated. In the first stage of the experiments, the response of a two-liquid-phase mixed tank bioreactor to periods of n-hexane starvation was compared with that of a control bioreactor. In the control bioreactor, after 3?days of starvation, approximately six days were needed to reach the removal efficiency it had before starvation. This figure was only 10?h for the silicone oil-containing bioreactor. The results confirmed that inclusion of a heavy organic solvent can increase the elimination capacity of a bioreactor and to help sustain high elimination capacity after starvation periods. In the second stage of the experiments, the effect of the amount of silicone oil on the performance of the bioreactor was investigated. Increasing the amount of oil from 5 to 10% (v/v) increased the maximum elimination capacity from 106 to 117?g/m³?h.     

Two and k-Photon Jaynes–Cummings Models and Dirac Oscillator Problem in Bargmann–Segal Representation

In this work, we show that the Bargmann–Segal representation is a very simple approach to obtain the energy eigenvalues of some two-level quantum systems. It is shown that for 2-photon and k-photon Jaynes–Cummings models, the Bargmann–Segal realization gives the same energy eigenvalue which obtained by Lie algebraic and the matrix methods. We also study the Dirac oscillator problem in this representation.     

Application of chromium‐doped fullerene as a carrier for thymine and uracil nucleotides: Comprehensive density functional theory calculations

The interactions of the nucleobases thymine (C₅H₆N₂O₂) and uracil (C₄H₄N₂O₂) with Cr‐doped C₂₀ fullerene (C₁₉Cr) are investigated by performing density functional theory calculations. The adsorption of these nucleobases on C₁₉Cr leads to two distinct geometries (P1 and P2) differing in the orientation of the nucleobases. The interaction of the nucleobases with the C₁₉Cr nanocluster is highly exothermic, revealing that they are chemically adsorbed on C₁₉Cr. The results show that the binding energy of the thymine–C₁₉Cr complex is slightly higher than that of the uracil–C₁₉Cr complex. In addition, the P2 geometry is more stable compared to P1 due to the higher binding energy in the former configuration. However, based on the results of natural bond orbital and frontier molecular orbitals analyses, the C₁₉Cr nanocage has higher reactivity with the nucleobases in P1 geometry in comparison with P2 due to the larger charge transfer and orbital hybridization in the former geometry. Moreover, the band gap of the C₁₉Cr nanocage decreases after interaction with the nucleobases, and interestingly the impact is more pronounced for P1 geometry, confirming the higher sensitivity of C₁₉Cr to the nucleobases in P1 geometry. Our findings reveal the promising potential of C₁₉Cr as an organometallic carrier for nucleobases thymine and uracil.