Synthesis and Stereochemistry of New Bis(1,3-Oxathian-2-yl) Derivatives: Epimerisation and Chair–Twist Equilibria

The synthesis and stereochemistry of some new bis(1,3-oxathian-2-yl) derivatives are reported. The conformational behavior of these compounds and the orientation of their substituents are deduced from the NMR spectra, from the X-ray crystal structures of two compounds and from the ab-initio level calculations. The epimerization of diastereoisomers and the chair ⇌ 22,5-twist equilibria were studied by variable temperature NMR.     

Organotin and tin(IV) derivatives of dimethyldithioarsinic acid

Organotin derivatives of dimethyldithioarsinic (dithocacodylic) acid have been obtained from the appropriate organotin chloride and the sodium salt of the latter. Tin(IV) chloride and NaS₂AsMe₂ · 2 H₂O yielded only two products, namely Cl₂Sn(S₂AsMe₂)₂ and Sn (S₂AsMe₂)₄, regardless of the reagent ratio. Spectroscopic characterization of the compounds (infrared and¹H NMR) provides structural information suggesting that the dimethyldithioarsinato group behaves as monodentate (or anisobidentate) ligand in Me₂Sn(S₂AsMe₂)₂, Bu₂Sn-(S₂AsMe₂)₂ and Cy₃Sn(S₂AsMe₂), as bidentate in Ph₂Sn(S₂AsMe₂)₂, Ph₃Sn(S₂AsMe₂) and Cl₂As(S₂AsMe₂)₂, whereas Sn(S₂AsMe₂)₄ contains both mono- and bidentate ligands, presumably in a six-coordinate structure.     

Femtosecond study of Cu(H(2)O) dynamics

The short-time nuclear dynamics of Cu(H(2)O) is investigated using femtosecond photodetachment-photoionization spectroscopy and time-dependent quantum wave packet calculations. The Cu(H(2)O) dynamics is initiated in the electronic ground state of the complex by electron photodetachment from the Cu(-)(H(2)O) complex, where hydrogen atoms are oriented toward Cu. Several time-resolved resonant multiphoton ionization schemes are used to probe the ensuing reorientation and dissociation. Immediately following photodetachment, the neutral complex is far from its minimum energy geometry and possesses an internal energy comparable to the Cu-H(2)O dissociation energy and undergoes both large-amplitude H(2)O motion and dissociation. Dissociation is observed to occur on three distinct time scales: 0.6, 8, and 100 ps. These results are compared to the results of time-dependent J=0 wave packet calculations, propagating the initial anion vibrational wave functions on the ground-state potential of the neutral complex. An excellent agreement is obtained between the experimental results and the ionization signals derived from the calculated probability amplitudes. Related experiments and calculations are carried out on the Cu(D(2)O) complex, with results very similar to those of Cu(H(2)O).     

Resolution enhancement in multidimensional solid-state NMR spectroscopy of proteins using spin-state selection

We show that the resolution of homonuclear multidimensional solid-state NMR correlation experiments can be significantly improved using transition selection and spin-state-selective polarization transfer techniques. The selection and transfer of single states allow the removal of the J-coupling contribution from the line width in both the direct and indirect spectral dimensions. This is demonstrated with a new spin-state-selective CO-Calpha correlation experiment, applied to a microcrystalline 85-residue protein. With this new sequence, all four components of the CO-Calpha cross-peaks are separated into different spectra, obtained by linear combination of four recorded data sets. Line narrowing of up to 44% was obtained on the protein sample for the spin-state-selective CO-Calpha spectrum compared to a standard spin-diffusion experiment. The new technique also allows an easy distinction between "direct" and "relayed" transfer cross-peaks.     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Stereochemistry of cyclobutanone resulted from cycloadditions of t-butylcyanoketene to bicyclo[2.2.1]heptene derivatives, as evidence for a π2s+π2a reaction mode

The stereochemistry of the cyclobutanones 1-7, resulted from the reaction of t-butylcyanoketene with bicyclo[2.2.1]heptene, bicyclo[2.2.1]heptadiene, 1,4 - dihydro - 1,4 - methanonaphthalene, 1,4 - dihydro - 9 - (1 - methylethylidene) - 1,4 - methanonaphthalene, 1,4 - dihydro - 1,4 - epoxynaphthalene, l,4,4a,8b - tetrahydro - 1,4 - methanobiphenylene (l,4,4a,8b) and 1,4,4a,8b - tetrahydro - 1,4 - methanobiphenylene(1,4,4aβ,8bβ) was established as having the cyclobutanone ring exo and the t-Bu group in the configuration. These findings represent a stereochemical argument in favour of a _π2_s + _π2_a reaction mode of t-butylcyanoketene to the above mentioned bicyclo[2.2.1]heptene derivatives. Observations regarding preservation of the original configurations of alkenes as well as the geometrical distorsion of the cyclobutanones are shortly discussed.     

New symmetric azomethinic dimer: the influence of structural heterogeneity on the liquid crystalline behaviour

The paper deals with the study of the thermotropic liquid crystalline properties of a new azomethinic symmetric dimer and some of its structural heterogeneous mixtures with one of its reagents. Their thermotropic behaviour was monitored by polarised light microscopy, differential scanning microscopy and variable temperature X-ray diffraction measurements. The influence of the structural heterogeneity on the mesomorphic behaviour was established and some similarities with the mesomorphic behaviour of the polydisperse polymers were underlined.     

Synergistic effect between TiO2 sol–gel and Degussa P25 in dye photodegradation

The TiO₂ powders were synthesized by versatile and low cost sol–gel process using HNO₃ and titanium tetra-isopropoxide (volumetric ratio of 4:1) following by the hydrolysis reaction. The powders show the two polymorphs of TiO₂: 96 % anatase and 4 % brookite, due to acidic condition (pH = 3). Thin films of titanium oxide were obtained by dip-coating, using the sol–gel of titanium oxide mixed with commercial Degussa P25 into a weight ratio 1:1 or 1:1.5, to enhance the synergistic effect of anatase/rutile ratio aiming at increasing the efficiency of the TiO₂ photocatalyst in dyes degradation. The thin film surface (charge and morphology) was controlled by polymer (poly-ethylene glycol) and surfactant (Sodium dodecyl sulphate, Triton X100) addition. The titanium oxide was characterized by particle size analyzer, contact angle measurements, X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The photocatalytic properties of powders and coatings were evaluated based on the degradation efficiency of two reference dyes (methyl orange and methylene blue). The results outline that poly(ethylene glycol) and films morphologies are the most influential factors that affecting the photocatalytic activity.