FINITE GROUPS WHOSE AUTOMORPHISM GROUP HAS ORDER CUBEFREE

ＦＩＮＩＴＥＧＲＯＵＰＳＷＨＯＳＥＡＵＴＯＭＯＲＰＨＩＳＭＧＲＯＵＰＨＡＳＯＲＤＥＲＣＵＢＥＦＲＥＥＬＩＳＨＩＲＯＮＧＡｂｓｔｒａｃｔＬｅｔＧｄｅｎｏｔｅａｆｉｎｉｔｅｇｒｏｕｐ．Ｉｔｉｓｓｈｏｗｎｔｈａｔｉｆ｜Ａｕｔ（Ｇ）｜ｉｓｃｕｂｅｆｒｅ...     

Does the beam width affect the generalized M factor of hard-edged diffracted beams?

A detailed study of the generalized M² factor of hard-edged diffracted beams based on the truncated second-order moments method, asymptotic analysis and self-convergent beam width approach is performed. The dependence of the generalized M² factor on the parameters characterizing the spatial profile, and beam truncation, etc. is analyzed.     

Propagation of the kurtosis parameter of Hermite-cosh-Gaussian beams

Starting from the propagation equation of Hermite-cosh-Gaussian (HChG) beams and the intensity moments definition, an analytical expression for the propagation of the kurtosis parameter of unapertured HChG beams passing through paraxial optical ABCD systems is derived and illustrated numerically. Special interesting cases are discussed, in particular, the kurtosis parameter of HChG beams at the waist plane is obtained readily from our general propagation expression.     

铑（Ⅲ）－钼酸盐－罗丹明B显色体系的研究和应用

在聚乙烯醇（ＰＶＡ）存在下，铑（Ⅲ）与钼酸盐和罗丹明Ｂ（ＲＢ）形成离子缔合物，缔合物的最大吸收位于５８０ｎｍ，摩尔吸光系数ε值１．６８×１０５Ｌ·ｍｏｌ－１·ｃｍ－１，服从比耳定律范围０～１０μｇＲｈ／２５ｍＬ，方法用于催化剂和冶金产品中铑的测定，结果满意     

Monitoring photoproduct formation and photobleaching by fluorescence spectroscopy has the potential to improve PDT dosimetry with a verteporfin-like photosensitizer

In current clinical practice, photodynamic therapy (PDT) is carried out with prescribed drug doses and light doses as well as fixed drug-light intervals and illumination fluence rates. This approach can result in undesirable treatment outcomes of either overtreatment or undertreatment because of biological variations between different lesions and patients. In this study, we explore the possibility of improving PDT dosimetry by monitoring drug photobleaching and photoproduct formation. The study involved 60 mice receiving the same drug dose of a novel verteporfin-like photosensitizer, QLT0074, at 0.3 mg/kg body weight, followed by different light doses of 5, 10, 20, 30, 40 or 50 J/cm2 at 686 nm and a fluence rate of 70 mW/cm2. Photobleaching and photoproduct formation were measured simultaneously, using fluorescence spectroscopy. A ratio technique for data processing was introduced to reliably detect the photoproduct formed by PDT on mouse skin in vivo. The study showed that the QLT0074 photoproduct is stable and can be reliably quantified. Three new parameters, photoproduct score (PPS), photobleaching score (PBS) and percentage photobleaching score (PBS%), were introduced and tested together with the conventional dosimetry parameter, light dose, for performance on predicting PDT-induced outcome, skin necrosis. The statistical analysis of experimental results was performed with an ordinal logistic regression model. We demonstrated that both PPS and PBS improved the prediction of skin necrosis dramatically compared to light dose. PPS was identified as the best single parameter for predicting the PDT outcome.     

微波等离子体光谱法测定碲的研究

微波等离子体原子发射光谱法(MIPAES)测定碲,前人已作过一些工作。本文利用我们建立的微量进样系统与MIPAES联用,对碲的测定进行了研究。实验中发现,加入适量的SnCl_2可降低检出限约一个数量级,Te_(214.3nm)的检出限为5 ng/mL,同时还研究了碱金属卤化物对碲的测定的影响。     

PBT／PC共混体系流变性能与形态结构研究

采用毛细管流交仪测定了ＰＢＴ／ＰＣ共混物的表观粘度、剪切应力，观察了不同共混物组成和不同温度下共混物的流变行为，并借助扫描电镜对共混物和微观形态结构进行分析。结果表明：ＰＢＴ／ＰＣ熔体共混物的流变行为接近假塑性流体．温度对共混物的流变行为影响很大，共混物的熔体粘度在ＰＢＴ／ＰＣ为９０／１０和６０／４０时呈双极值．共混物为两相结构，ＰＣ含量为４－５０％时呈两互锁结构。     

Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.