Simple, expedient methods for the determination of water and electrolyte contents of cellulose solvent systems

The concentrations of water, W, and electrolytes present in solutions of LiCl in N,N-dimethylacetamide, LiCl/DMAc, and of tetrabutylammonium fluoride. x-hydrate in DMSO, TBAF.xW/DMSO can be accurately and expediently determined by three independent methods, UV–vis, FTIR and EMF measurement. The first relies on the use of solvatochromic probes whose spectra are sensitive to solution composition. It is applicable to W/LiCl/DMAc solutions but not to TBAF.xW/DMSO, because the charge-transfer complex bands of the probes are suppressed by strong interactions with the latter electrolyte. Integration of ν_OH band of water may be employed in order to determine [W], hence [electrolyte] by weight difference. EMF measurement uses ion-selective electrodes in order to determine [electrolyte], hence [W] by weight difference. Results of the latter method were in excellent agreement with those of FTIR. The reason for the failure of Karl Fischer titration is addressed, and the relevance of the results obtained to functionalization of cellulose under homogenous solution conditions is briefly commented on.     

Solid-State Thin-Film Sensors Based on Chalcogenide Materials Obtained by Planar Technology and Pulsed Laser Deposition

Methods of silicon planar technology and pulsed laser deposition were applied to fabricate fully solid-state chemical sensors for determining ions of copper, lead, cadmium, thallium, and also sulfide and chloride ions on the basis of thin chalcogenide films as ion-sensitive membranes.     

An effect of application of chiral aluminium alkoxides and amides as adducts to zirconium catalyzed carbo- and cycloalumination of olefins

This paper is dedicated to a study of properties of the following novel optically active organoaluminium compounds (OACs): (1S,2S)-l,7,7-trimethyl-2-[(dialkylalumina)oxy]-bicyclo[2.2.1]heptanes and (1S)-N-(dialkylalumina)-6,7-dimethoxy-1-methyl-1,2,3,4- tetrahydroisoquinolines. The synthesis of the chiral OACs was carried out in the reaction of either natural camphor or salsolidine with both AlEt₃ and i-Bu₂AlH. The main goal of the research was to investigate the stereodifferentiating activity of the chiral OACs in the olefin carbo- and cycloalumination reactions, catalyzed by Cp₂ZrCl₂.     

Dimethylamino-substituted 7H-Benzo[de]pyrazolo[5,1-a]isoquinolin-7-ones and Their Behavior under Vilsmeier-Haack Conditions

The behavior of dimethylamino-substituted 7H-benzo[de]pyrazolo[5,1-a]isoquinoline-7-ones, synthesized for the first time, under conditions of the Vilsmeier-Haack reaction. It has been shown that, on heating with POCl₃ and DMF, they are converted by electrophilic substitution at the position ortho to the dimethylamino group, followed by cyclization of the iminium adduct to a quinazolinium salt. When an acetyl group is present, the Arnold reaction, leading to the formation of a chloroaryl, accompanies the heterocyclization. The rates and proportion of the reaction products depend on the position of the dimethyl groups relative to the pyrazole ring.     

Thermodynamic study of a series lithium β-diketonates

Thermal behaviour of a series of lithium β-diketonates: Li(dpm) (dpm=dipivaloylmethanate (2,2,6,6-tetramethylheptane-3,5- dionate)), Li(pta) (pta=pivaloyltrifluoracetonate (2,2-dimethyl-6,6,6-trifluoro-3,5-hexanedionate)), Li(tfa) (tfa=trifluoracetylacetonate (1,1,1-trifluoro-2,4-pentandionate)), Li(hfa) (hfa=hexafluoracetylacetonate (1,1,1,5,5,5-hexafluoro-2,4-pentandionate)) has been investigated. Gas phase composition of these complexes has been established. Temperature dependences of vapor pressure of lithium compounds were obtained by static and dynamic methods, and thermodynamic parameters were calculated. Dependence of compound volatility on ligand structure is shown. For Li(dpm) detailed investigation has been done by differential scanning calorimetry (DSC).     

Coprecipitation of Naphthol Azosulfonates with Organic Coprecipitants and Its Use in Flow-Injection Analysis

The coprecipitation of azo compounds based on 4-nitrophenyl- and 4-sulfophenyldiazonium naphthol sulfonates as their diphenylguanidinium ion-pair complexes with analogous compounds of naphthalene-2-sulfonic acid and 4-phenylsulfodiazonium is investigated. The optimization of the coprecipitation is considered based on the notions of the driving force of the cocrystallization of impurities. The optical characteristics of colored ion-pair complexes are measured. It is found that the water solubility is decreased most substantially for azosulfonates with hydrophobic nitro groups and with no more than two sulfo groups in different aromatic nuclei, which can lead to a decrease in the detection limit due to preconcentration by coprecipitation, which stimulates the thermodynamic flux of concentrate elution. Coprecipitation is combined with flow-injection analysis in the on-line mode, and new procedures are developed for determining naphthol sulfonates and related azo compounds with the detection limit equal to 0.003–0.006 mg/50 mL.     

Coherent effects in energy transport in model dendritic structures investigated by ultrafast fluorescence anisotropy spectroscopy

Measurements of ultrafast fluorescence anisotropy decay in model branched dendritic molecules of different symmetry are reported. These molecules contain the fundamental branching center units of larger dendrimer macromolecules with either three (C(3))- or four (T(d), tetrahedral)-fold symmetry. The anisotropy for a tetrahedral system is found to decay on a subpicosecond time scale (880 fs). This decay can be qualitatively explained by F?rster-type incoherent energy migration between chromophores. Alternatively, for a nitrogen-centered trimer system, the fluorescence anisotropy decay time (35 fs) is found to be much shorter than that of the tetramers, and the decay cannot be attributed to an incoherent hopping mechanism. In this case, a coherent interchromophore energy transport mechanism should be considered. The mechanism of the ultrafast energy migration process in the branched systems is interpreted by use of a phenomenological quantum mechanical model, which examines the two extreme cases of incoherent and coherent interactions.     

Mixed nitrosyl/phosphinidene and nitrene/phosphinidene clusters of ruthenium

Reaction of the aminophosphinidene complex [Ru5(CO)15(mu 4-PNPri2)] 1 with [PPN][NO2] (PPN = Ph3P=N=PPh3) led to the mixed nitrosyl/phosphinidene cluster complex [PPN][Ru5(CO)13(mu-NO)(mu 4-PNPri2)] 2 which is transformed into the novel nitrene/phosphinidene cluster [Ru5(CO)10(mu-CO)2(mu 3-CO)(mu 4-NH)(mu 3-PNPri2)] 3 via treatment with triflic acid.     

Biophysical characterization of complexation of DNA with block copolymers of poly(2-dimethylaminoethyl) methacrylate, poly(ethylene oxide), and poly(propylene oxide)

The interactions of DNA (salmon testes) with two new cationic block copolymers made of poly(2-dimethylaminoethyl) methacrylate and poly(ethylene oxide), PEO-pDMAEMA, or poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), L92-pDMAEMA, were studied with the aim to understand their different in vitro transfection efficiencies when used as nonviral delivery vectors. PEO-pDMAEMA does not show surface activity while L92-pDMAEMA is as surface active as its parent Pluronic L92. Surface tension, titration microcalorimetry, ethidium bromide displacement, and zeta-potential measurements were carried out in phosphate buffers at pH 5 and 7. The association of L92-pDMAEMA with DNA was strongly exothermic at both pHs; the critical aggregation concentration (CAC) corresponded to a N/P ratio of 0.3, the maximum energy evolved was reached for N/P ratios of 0.82 and 1.27 at pH 5 and pH 7, respectively, and the saturation occurred for N/P ratios close to 2. The presence of L92 in the structure of this new block copolymer apparently did not modify the thermodynamic parameters of the interaction with DNA. In contrast, the interaction with PEO-pDMAEMA was significantly less exothermic, and CAC and saturation occurred for N/Ps equal to 0.43 and 1.37, respectively. The strong affinity of L92-pDMAEMA for DNA was reflected in its capacity to displace ethidium bromide and in the jump in the values of the zeta potential when N/P is near 1. Above the N/P ratio at which electroneutral polyplexes are formed, only at pH 5 an excess of L92-pDMAEMA is incorporated in the complexes, resulting in positively charged complexes. The profile of the zeta-potential values obtained for mixtures of L92-pDMAEMA with Pluronic P123 showed a shift to a lower N/P ratio, owing to an easier interaction of L92-pDMAEMA molecules with DNA in the presence of P123. Additionally, a visual inspection of the systems indicates that P123 contributes to stabilize/solubilize the DNA/cationic polymer aggregates, by avoiding the typical phase separation near the charge neutralization point. The information obtained can be particularly useful to optimize the conditions to form efficient polyplexes for gene delivery systems.