Synthesis and spectral studies of platinum complexes with amide-group containing ligands

Summary Complexes of platinum(II) with 2-(acetylamino)benzoic acid, 2-(benzoylamino)benzoic acid, maleanilic acid, malea-1-naphthanilic acid, 2-(phenylamino)benzoic acid, 2-[(2-aminophenylamino)carbonyl]benzoic acid, 2-(aminobenzoyl)benzoic acid, 2-[1-naphthalenylamino)-carbonyl]benzoic acid, 2-(2-aminobenzoylamino)-benzoic acid have been prepared and characterized by elemental analysis, molar conductivity measurements, thermal data and i.r., electronic and n.m.r. spectra.     

Catalytic behavior of decomposed molybdophosphoric acid supported on alumina for oxidative dehydrogenation of ethane to ethylene

Oxidative dehydrogenation of ethane (ODHE) to ethylene was investigated over a series of alumina supported molybdophosphoric acid (MPA) catalysts. The MPA was transformed into surface Mo oxides on Al₂O₃ when subjected to calcination at 600°C. The catalysts were characterized by N₂-adsorption, XRD, FT-IR spectroscopy and TPR techniques. The results showed that MPA loading and the source of Mo precursor had a clear influence on the catalytic performance. The evaluation of the catalysts for ODHE at temperatures between 450 and 550°C revealed superior ethane conversion (X～24%) and ethylene selectivity (S = ca. 65%) over 20 wt % MPA/Al₂O₃ catalyst. The transformation of MPA into finely dispersed Mo oxides on Al₂O₃ appeared to be responsible for this improved performance.     

Gold,silver, and palladium nanoparticle/nano-agglomerate generation,collection, and characterization

Generation, collection, and characterization of gold, silver, and palladium nanoparticles and nano-agglomerates (collectively “nanoparticles”) have been explored. The nanoparticles were generated with a spark aerosol generator (Palas GFG-1000). They were collected using a deposition cell under diffusion and thermophoresis. The shapes and sizes of the deposited particles were measured using transmission electron microscopy (TEM). TEM images showed that the particles were in the range of 8–100 nm in diameter, and their shapes varied from nearly spherical to highly non-spherical. Thermophoresis enhanced the deposition of nanoparticles (over the diffusive or the isothermal deposition) in all cases. Further, the size distributions of the nanoparticles generated in the gas phase (aerosol) were measured using a scanning mobility particle sizer (SMPS 3080, TSI) spectrometer. The SMPS results show that an increase in the spark frequency of the generator shifted the size distributions of the nanoparticles to larger diameters, and the total particle mass production rate increased linearly with increase in the spark frequency. The computational fluid dynamics code Fluent (Ansys) was used to model the flow in the deposition cell, and the computed results conform to the observations.     

Three-dimensional photoelastic study of the load-carrying capacity/face width ratio of Wildhaber-Novikov gears for automotive applications

Wildhaber-Novikov gears are becoming more and more popular for heavy load applications. They have been tried as speed-reducing gears, in spite of heavy noise generation, in aircraft jet engines, marine engines and agricultural machinery. These circular-arc gears, though stronger than involute geras, have the disadvantage of needing larger face width. Axial face width required can be minimized only at the expense of load-carrying capacity. This is not a serious disadvantage with stationary engines. But in the case of automotive applications, this fact limits the load-carrying capacity of Wildhaber-Novikov gears, since space problem is very critical in these applications and large face widths, therefore, cannot be used for such gear-reduction units. The face width is determined by the helix angle and, therefore, a thorough investigation of the dependence of the load-carrying capacity on helix angle is necessary, if these special types of gears have to make headway into the automotive field. In this experimental investigation, three-dimensional photoelastic technique has been employed to study the load-carrying capacity/face width ratio. Three-dimensional gear models made of epoxy castings (Araldite B) were loaded in a specially built gear-loading fixture and were stress frozen. Gear cutters of Wildhaber-Novikov gears developed at the laboratory were used for the preparation of these three-dimensional gear models. The stress-frozen models were analyzed using the conventional slicing technique to study the contact and bending-stress distribution along the face width. The load-carrying capacity in terms of contact stress and bending stress has been studied for different face widths and helix angles. Twenty-deg pressure angle, 14-mm module gears of alladdendum type of Wildhaber-Novikov gears with different helix angles up to 40 deg were tested. The helical-overlap ratio used was 1.0. The conventional profile parameters were employed for the manufacture of gear cutters of end-mill type. The decrease in contact and bending strength with increase in the helix angle or decrease in the face width, as obtained from this photoelastic method of stress analysis has been compared with existing theoretical results.     

A Stereoselective Total Synthesis of Xyolide,a Natural Bioactive Nonenolide

A stereoselective total synthesis of xyolide, a naturally occurring bioactive nonenolide, has been accomplished. The acid fragment of the molecule has been prepared from D ‐mannitol and the alcohol fragment from (2Z)‐but‐2‐ene‐1,4‐diol. The synthesis involves the coupling of these two fragments using the Yamaguchi esterification protocol, followed by intramolecular ring‐closing methathesis. The diastereoisomeric alcohol fragment has also been utilized in this synthesis by employing the Mitsunobu esterification.     

Design,Synthesis, and Biological Activity of New Bis-1,2,3-triazole Derivatives Bearing Thiophene-Chalcone Moiety

Russian Journal of General Chemistry - A series of novel 1,4-substituted bis-aralkyl and aryl 1,2,3-triazoles bearing thiophene chalcones are synthesized via the Claisen condensation of bis...     

An efficient chemo‐ and stereoselective synthesis of enaminones and enaminoesters using (bromodimethyl)sulfonium bromide under solvent‐free conditions

(Bromodimethyl)sulfonium bromide has efficiently been employed for chemo‐ and stereoselective conversions of β‐dicarbonyl compounds into β‐enaminones and β‐enaminoesters by a treatment with amines at room temperature under solvent‐free conditions. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:630–633, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20477     

Mild and practical stereoselective synthesis of (Z)- and (E)-allyl bromides from Baylis-Hillman adducts using Appel agents (PPh3/CBr4): a facile synthesis of semiplenamides C and E

Appel agents (PPh₃/CBr₄) have been utilized for high-yielding stereoselective synthesis of (Z)- and (E)-allyl bromides from Baylis-Hillman adducts at room temperature. The method has been applied for the synthesis of naturally occurring bioactive fatty acid amides, semiplenamides C and E.     

Lysinated Multiwalled Carbon Nanotubes with Carbohydrate Ligands as an Effective Nanocarrier for Targeted Doxorubicin Delivery to Breast Cancer Cells

Multiwalled carbon nanotubes (MWCNTs) are elongated, hollow cylindrical nanotubes made of sp2 carbon. MWCNTs have attracted significant attention in the area of drug delivery due to their high drug-loading capacity and large surface area. Furthermore, they can be linked to bioactive ligands molecules via covalent and noncovalent bonds that allow for the targeted delivery of anticancer drugs such as doxorubicin. The majority of methodologies reported for the functionalization of MWCNTs for drug delivery are quite complex and use expensive linkers and ligands. In the present study, we report a simple, cost-effective approach for functionalizing MWCNTs with the carbohydrate ligands, galactose (GA), mannose (MA) and lactose (LA), using lysine as a linker. The doxorubicin (Dox)-loaded functionalized MWCNTs were characterized using FT-IR, NMR, Raman, XRD and FE-SEM. The drug–loaded MWCNTs were evaluated for drug loading, drug release and cell toxicity in vitro, in breast cancer cells. The results indicated that the carbohydrate-modified lysinated MWCNTs had greater Dox loading capacity, compared to carboxylated MWCNTs (COOHMWCNTs) and lysinated MWCNTs (LyMWCNTs). In vitro drug release experiments indicated that the carbohydrate functionalized LyMWCNTs had higher Dox release at pH 5.0, compared to the physiological pH of 7.4, over 120 h, indicating that they are suitable candidates for targeting the tumor microenvironment as a result of their sustained release profile of Dox. Doxorubicin-loaded galactosylated MWCNTs (Dox-GAMWCNTs) and doxorubicin loaded mannosylated MWCNTs (Dox-MAMWCNTs) had greater anticancer efficacy and cellular uptake, compared to doxorubicin–loaded lactosylated MWCNTs (Dox-LAMWCNTs) and pure Dox, in MDA-MB231 and MCF7 breast cancer cells. However, neither the ligand conjugated multiwall blank carbon nanotubes (GAMWCNTs, MAMWCNTs and LAMWCNTs) nor the lysinated multiwalled blank carbon nanotubes produced significant toxicity in the normal cells. Our results suggest that sugar-tethered multiwalled carbon nanotubes, especially the galactosylated (Dox-GAMWCNTs) and mannosylated (Dox-MAMWCNTs) formulations, may be used to improve the targeted delivery of anticancer drugs to breast cancer cells.     

A distinct approach for the rapid synthesis of homoallylic amines starting directly from nitro compounds in water

Three-component reactions of nitroarenes, benzaldehydes, and allyltributylstannane using indium in dilute aqueous HCl at room temperature afford the corresponding homoallylic amines in high yields within 5-10 min. The conversion in one-pot synthesis involves the following steps: (i) reduction of nitro compounds to amines, (ii) formation of imines from amines and aldehydes, and (iii) allylation of imines.