Data and device protection: A ToF‐SIMS,wetting, and XPS study of an Apple iPod nano

An important aspect of the robustness of an electronic device is its ability to resist water, fingerprints, dirt, and smudges that may compromise its ability to function and/or the information within it. Here, we report a chemical analysis by ToF‐SIMS, wetting, and XPS of the surfaces in a commercially available Apple iPod nano (8GB, MC525LL/A), which showed good resistance to its environment. This analysis reveals that the front panel (touchscreen) of the device is coated with a low free energy fluorinated polymer that may consist of short segments of a fluorinated hydrocarbon connected through ether linkages. No other part of the device appears to have this hydrophobic coating. A plasma treatment of the device leads to a deterioration of its performance. This work demonstrates how different analytical techniques can complement each other and contribute to a better understanding of a surface or a material. Copyright © 2013 John Wiley & Sons, Ltd.     

Atomic Layer Deposition of Aluminum-Free Silica onto Patterned Carbon Nanotube Forests in the Preparation of Microfabricated Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We describe the direct, conformal, atomic layer deposition (ALD) of silica onto carbon nanotubes (CNTs) in the microfabrication of...     

Pharmaceutical and medical applications of polymer electrolytes

Classic methods of drug delivery have embraced a number of routes into the site of pharmacological action. Modern preference, wherever possible, is for a non-invasive route to minimise the chance of cross infection, especially of the AIDS virus. The skin, which is the largest organ in the human body, is a particularly appealing route as, in the absence of wounds and blemishes, it offers a natural, high-integrity, barrier to the outside world. Skin patches containing active drug that is allowed to diffuse passively across the external skin barrier into the bloodstream now enjoy wide application but a problem is that the rate of egress is often slow. For certain ionic drugs, including local anaesthetics and, more recently, peptides and gene-based, biotechnological engineered pharmaceuticals, it is possible substantially to enhance transdermal transport by iontophoresis. The technique of iontophoresis facilitates the passage of ionic drugs through the skin using an electric current. Ionically conducting polymers (polymer electrolytes) are potential candidates as hosts for drugs to be delivered iontophoretically. Key issues affecting iontophoretic delivery are reviewed in this paper and the potential role of polymer electrolyte materials in iontophoretic devices will be described. Paper presented at the 9th EuroConference on Ionics, Ixia, Rhodes, Greece, Sept. 15–21, 2002.     

Separation of cannabinoids on three different mixed‐mode columns containing carbon/nanodiamond/amine‐polymer superficially porous particles

Three mixed‐mode high‐performance liquid chromatography columns packed with superficially porous carbon/nanodiamond/amine‐polymer particles were used to separate mixtures of cannabinoids. Columns evaluated included: (i) reversed phase (C₁₈), weak anion exchange, 4.6 × 33 mm, 3.6 μm, and 4.6 × 100 mm, 3.6 μm, (ii) reversed phase, strong anion exchange (quaternary amine), 4.6×33 mm, 3.6 μm, and (iii) hydrophilic interaction liquid chromatography, 4.6 × 150 mm, 3.6 μm. Different selectivities were achieved under various mobile phase and stationary phase conditions. Efficiencies and peak capacities were as high as 54 000 N/m and 56, respectively. The reversed phase mixed‐mode column (C₁₈) retained tetrahydrocannabinolic acid strongly under acidic conditions and weakly under basic conditions. Tetrahydrocannabinolic acid was retained strongly on the reversed phase, strong anion exchange mixed‐mode column under basic polar organic mobile phase conditions. The hydrophilic interaction liquid chromatography column retained polar cannabinoids better than the (more) neutral ones under basic conditions. A longer reversed phase (C₁₈) mixed‐mode column (4.6 × 100 mm) showed better resolution for analytes (and a contaminant) than a shorter column. Fast separations were achieved in less than 5 min and sometimes 2 min. A real world sample (bubble hash extract) was also analyzed by gradient elution.     

Hydroxylation of the silica in microfabricated thin layer chromatography plates as probed by time‐of‐flight secondary ion mass spectrometry and diffuse reflectance infrared Fourier transform spectroscopy

Microfabricated silica thin layer chromatography (TLC) plates have previously been prepared on patterned carbon nanotube forests. The high temperatures used in their fabrication reduce the number of hydroxyl groups on their surfaces. Fortunately, silica can be rehydroxylated. In diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), a silanol peak below 3740 cm^?1 indicates a well‐hydroxylated silica surface that is fit for chromatography. Hydroxylations of our materials with HF are so effective that it is not possible to discern the position of this peak. In contrast, this signal is discernable when the plates are treated with NH₄OH. To find a more convenient method for studying the surfaces of TLC plates, time‐of‐flight secondary ion mass spectroscopy (ToF‐SIMS) was considered. ToF‐SIMS is advantageous because multiple microfabricated TLC plates must be scraped to obtain enough silica for one DRIFT analysis, while static SIMS can be performed on very small regions (500 × 500 µm² or less) of individual plates. Ratios of the SiOH⁺ and Si⁺ ToF‐SIMS signals for microfabricated TLC plates correlated well with ~3740 cm^?1 silanol peaks from DRIFT. Thus, SIMS allows direct analysis of all of our treated and untreated plates, including those hydroxylated with HF. The best hydroxylation condition for HF, which was better than any studied for NH₄OH, was around 150 ppm at room temperature. The best hydroxylation condition for NH₄OH was 50 °C for 72 h. ToF‐SIMS versus DRIFT results of commercial TLC plates were also obtained and evaluated. Copyright © 2014 John Wiley & Sons, Ltd.     

Fluorine plasma treatment of bare and nitrilotris(methylene)triphosphonic acid (NP) protected aluminum: an XPS and ToF‐SIMS study

Nitrilotris(methylene)triphosphonic acid (NP) is a technologically important molecule that has been used for years as a corrosion inhibitor and/or adhesion promoter on aluminum and other metal surfaces. However, to the best of our knowledge, the detailed surface characterization of NP adsorbed on aluminum, or on any other surface, has not been reported. Herein, we report an X‐ray photoelectron spectroscopy and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) analysis of a series of untreated and NP‐coated aluminum substrates that were exposed to the downstream products of a fluoroalkane + oxygen plasma for different amounts of time (from 0 to 20 s). As indicated by P 2p, N 1s, Al 2p, O 1s, and F 1s narrow scans, even a 4‐s plasma treatment significantly damages the NP protective layer and converts the native aluminum oxide into aluminum oxyfluoride. Heat treatment of the fluorine plasma‐treated samples in the air substantially converts the aluminum oxyfluoride back to aluminum oxide, while similar heating under vacuum results in little change to the materials. A slow loss of fluorine from the samples occurs over the course of weeks when they are stored in the air. A ToF‐SIMS analysis reveals sets of signals that are consistent with no surface treatment, NP treatment, or fluorine plasma treatment. A principal component analysis of the negative ion ToF‐SIMS spectra from the samples shows the expected differentiation of the samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Monte carlo methods and lattice discontinuities

The choice of the Monte Carlo method for the theoretical study of lattice discontinuities, such as surfaces, grain boundaries and dislocations is justified. A brief, non-rigorous discussion of the basic statistical mechanics required to develop the Monte Carlo method is given. Current work in the theoretical study of interfacial systems in solids is reviewed and problems to which the Monte Carlo method might be applied are suggested.     

Passivation of aluminum with alkyl phosphonic acids for biochip applications

Self-assembly of decylphosphonic acid (DPA) and octadecylphosphonic acid (ODPA) was studied on aluminum films using XPS, ToF-SIMS and surface wettability. Modified aluminum films were tested for passivation against silanization and subsequent oligonucleotide attachment. Passivation ratios of at least 450:1 compared to unprotected aluminum were obtained, as quantified by attachment of radio-labeled oligos.     

Metallosupramolecular Thin Polyelectrolyte Films

Molecular recognition and electrostatic interaction of oppositely charged polyelectrolytes are combined in the fabrication of ultrathin metallosupramolecular multilayers [shown schematically in the picture, PEI=polyethyleneimine, PSS=poly(styrene sulfonate)]. The layers between the PSS layers are composed of an iron(II ) bis(terpyridine) coordination polymer.     

Polyelectrolytes as new matrices for secondary ion mass spectrometry

Significant enhancements in ion yields in time-of-flight secondary ion mass spectrometry (TOF-SIMS) are observed when water-soluble analytes are mixed with a polyelectrolyte, e.g., poly(diallyldimethylammonium chloride) or poly(sodium 4-styrenesulfonate), and then deposited in the layer-by-layer method on a surface. This previously unobserved effect is demonstrated for 5-chloro-8-methoxyquinoline appended diaza-18-crown-6, 5-(2-aminoethoxy)methyl-5-chloro-8-methoxyquinoline appended diaza-18-crown-6, acridine, 9-anthracenecarboxylic acid, and ferrocenecarboxylic acid. By optical ellipsometry film thicknesses range from ca. 5-20 angstroms. X-ray photoelectron spectroscopy shows significantly less analyte in the polyelectrolyte-analyte films than in the neat analytes. However, TOF-SIMS generally shows significant enhancements in ion yields from the polyelectrolyte films compared with either the neat compounds or the compounds solubilized with acid or base and then dried on a surface. These significant enhancements in ion yields also appear to extend to analyte fragments and cationized molecular species. Some enhancement is also observed for dried droplets of analytes mixed with a polyelectrolyte on surfaces.