Interpretation of initial stage of 3C-SiC growth on Si(1 0 0) using dimethylsilane

The initial stage of cubic silicon carbide (3C-SiC) growth on a Si(0 0 1) surface using dimethylsilane (DMS) as a source gas was observed using scanning tunneling microscopy (STM) and reflection high-energy electron diffraction (RHEED). It was found that the dimer vacancies initially existing on the Si(0 0 1)-(2 × 1) surface were repaired by the Si atoms in DMS molecules, during the formation of the c(4 × 4) surface. From the STM measurement, nucleation of SiC was found to start when the Si surface was covered with the c(4 × 4) structure but before the appearance of SiC spots in the RHEED pattern. The growth mechanism of SiC islands was also discussed based on the results of RHEED, STM and temperature-programmed desorption (TPD).     

Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

Keratinized epithelial transport of beta-blocking agents. I. Relationship between physicochemical properties of drugs and the flux across rat skin and hamster cheek pouch.

The maximum fluxes (Jmax) of beta-blockers through keratinized membranes were determined in vitro and compared with their physiochemical parameters such as lipophilicity (log k'0) and melting point (mp). Rat abdominal skin and hamster cheek pouch mucosa were used as the model membranes. Propranolol, metoprolol, timolol, pindolol, nadolol and agenolol were used as beta-blockers with a variety of physicochemical characters. Linear relations of Jmax with either log k'0 or mp were observed both in intact rat skin and in intact hamster cheek pouch, suggesting that the lipophilicity and thermodynamic activity of a drug in the crystal state primarily affect the drug's permeation through these membranes. However, the slope, dJmax/d(log k'0), for cheek pouch mucosa was greater than that for rat skin, corresponding to the lack of appendigeal shunt pathways in cheek pouch. Penetration studies using the delipidized membranes and the isolated stratum corneum sheet of hamster cheek pouch mucosa clarified that the primary rate-limiting barrier function might exist in the lipid layer of the stratum corneum. Jmax values for the tape-stripped and delipidized skins correlated with both the solubilities of drugs in the vehicle and with the mp, suggesting the polar porous characteristics of both model membranes. However, a theoretical approach confirmed that the contribution of an intracellular or aqueous pore route in the intact membrane to the permeation of drugs with positive lipophilic indexes is negligible.     

Imprinting by hot embossing in polymer substrates using a template of silica glass surface-structured by the ablation of LIBWE method

Laser-induced backside wet etching (LIBWE) of silica glass plates was performed to fabricate an imprinting template for hot embossing in polymer substrates such as polystyrene and silicone resin. Well-defined inverse surface-micropatterns of gratings and grid arrays on the substrates were produced by the hot embossing using a surface-structured silica glass as the template. These results indicate that the LIBWE method allows us to generate robust glass molding tools that exhibit the inverse shapes of the intended microstructures. PACS 52.38.Mf; 68.47.Mn; 81.05.Kf; 81.05.Lg; 83.50.Uv     

Polymers having stable radicals. II. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 1-hydroxy-2,2,6,6-tetramethylpiperidine

Polymers having stable pendant . radicals were synthesized through their precursor polymers by oxidizing them in air or by H₂O₂–Na₂WO₄. Hydrochlorides and sulfates of 4-methacryloylamino- and 4-methacryloyloxy-1-hydroxy-2,2,6,6-tetramethylpiperidines were synthesized as precursor monomers and polymerized by using α,α′-azobisisobutyronitrile under appropriate conditions to precursor polymers of high molecular weight: poly-4-methacryloylamino-/oxy-1-hydroxy-2,2,6,6-tetramethylpiperidinehydrochlorides and sulfates. The precursor polymers were converted to polymers having nitroxyl stable radicals, i.e., poly-4-methacryloylamino-/oxy-2,2,6,6-tetramethylpiperidine-1-oxyls, by oxidation in air or with H₂O₂–Na₂WO₄ without any main-chain scission. The structure of the resultant stable radical polymers was determined by infrared, ultraviolet, and ESR spectroscopy. Based on the results of spectroscopic analysis and Kjeldahl analysis, the transformation from precursors to nitroxyl stable radical polymers was found to be quantitative. Investigations on the applicability of polymeric nitroxyl radicals to oxidation-reduction reactions were attempted by means of polarography; the reduction half-wave potential was found to be ?1.16 V for the mercury pool.     

Emission spectrographic determination of trace elements in atmospheric particulate matter

Air containing particulate material was passed continuously for one month through a low-volume air sampler equipped with a cyclone to exclude particulates greater than 10 μm in diameter. The samples and filters were ashed in a low-temperature plasma and, after addition of In₂O₃ support, palladium internal standard and graphite buffer, the ashes were analyzed by a.c. are emission spectrometry. Standard samples were prepared from a commercial standard containing 49 elements. The procedure allows the determination of 14 trace metals (Ag, Al, Cr, Cu, Fe, Ga, Mn, Mo, Ni, Pb, Sn, Ti, V, Zn) with relative standard deviations of 1.4–15.1%. The procedure has been applied successfully to monthly determinations of the average atmospheric concentrations of these elements in Kobe City for the past three years.     

X-ray structural study of a zinc(II) inclusion complex of a phenolate-pendant cyclam

The molecular structure of phenol-pendant cyclam-zinc(II) complex,4a, has been determined by X-ray structure analysis. Crystals of4a · ClO₄ · CH₃OH (C₁₆H₂₇N₄OZn · ClO₄ · CH₃OH) are monoclinic, space groupP2₁/nn, with four molecules in the unit cell of dimensionsa=31.198(2) Å,b=8.426(1) Å,c=8.214(1) Å, and=93.96(1)°. The structure was solved by the heavy atom method and refined anisotropically toR=0.044,R _w=0.062 for 1551 independent reflections. The complex assumes a five-coordinate, square pyramidal geometry, where zinc(II) is surrounded by the cyclam moiety in a planar fashion with the pendant phenolate anion occupying an axial position. An extremely short Zn-O(phenolate) bond distance of 1.983(5) Å, in conjunction with the 0.288 Å displacement of Zn(II) above the cyclam N₄ plane toward the phenolate, accounts for the extremely low pK _a value of 5.8 for the pendant phenol. These facts about4a, in comparison with the previous findings for the Ni(II) (4b) and Cu(II) complexes (4c) with the same ligand, illustrate well the characteristics of zinc(II) ion coordination properties.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Information theory of miniaturization advantages of column liquid chromatography for quantitative analysis

Summary The influences of decreasing column diameter and length on two analytical goals, the precision and solvent efficiency, in reversed-phase liquid-chromatography are studied. Low solvent consumption is one of analytical advantages of miniaturized columns and is shown to be quantitatively evaluated by the precision and solvent efficiency which are defined to be the total Shannon mutual information obtained from an assay and the information obtained in a unit solvent volume, respectively. Analysis of paraben food additives on a microbore column is taken as an example. In trace analysis, the relative standard deviation (RSD) of measurements theoretically derived from the precision is shown to approach to the observed ones.