Cyanide-Free One-Pot Synthesis of Methacrylic Esters from Acetone

Methacrylic esters, represented by methyl methacrylate (MMA), are widely used as commodity chemicals. Here, the one-pot synthesis of methacrylic esters from acetone, a haloform and alcohols in the presence of an organic base is described. Using DBU as the organic base for the reaction of acetone, chloroform and methanol in acetonitrile afforded MMA in 66 % yield. When the solvent was replaced by benzonitrile, the product MMA was successfully purified by distillation. Applicability of this process to various alcohols was also investigated to show ethyl, phenyl, CF₃CH₂, and n-C₆F₁₃CH₂CH₂ esters were obtained in moderate yields. The use of bromoform instead of chloroform resulted in the improvement of the yield, for example, methyl and n-C₆F₁₃CH₂CH₂ esters up to 81 and 70 %, respectively. The reaction with deuterated starting materials acetone-d₆ and MeOH-d₄, with DBU in acetonitrile afforded deuterated MMA (MMA-d₈) in 70 % yield.     

Application of the 19F NMR technique to observe binding of the general anesthetic halothane to human serum albumin.

19F NMR techniques were employed to characterize the binding property of the widely used general anesthetic halothane with human serum albumin (HSA). It was found that 19F(1H) NOE and 2D 1H-19F HOESY experiments detected intermolecular NOEs between halothane 19F and HSA protons. Measurements of the diffusion coefficients for halothane were also carried out by 1H and 19F NMR, indicating the interaction of halothane with HSA. The present results indicate that these techniques are very suitable to identify a fluorine-containing ligand binding with a protein receptor in the drug-discovery process.     

Measurement on Spot Size Dependence of Dense WDM Dielectric Multilayer Filters

We present the spot size dependence of dielectric multilayer filters for use in dense WDM systems. We found large dependences of filter performances on the spot size and the incident angle of input light, which should be important for miniaturizing multi-channel add/drop filters.     

Development and features of hydro-membrane gas chromatography.

Hydro-membrane gas chromatography (HMGC) is achieved by the annular condensation of water in a capillary column at less than 70 degrees C. The annular membrane of water is formed as a result of the wettability of the stationary phase, which is induced at a water contact angle ranging from 75 degrees to 79 degrees, as derived from a solubility parameter (delta) range of 15.7 +/- 0.3 MPa(1/2) of the coated resin. The range of the liquid to gas volume ratio (beta) required to support the annular membrane should be kept between 0.00005 and 0.0003. In the case of a 0.25-mm i.d. column, the ratio can be set by the combination of a 0.1 to 0.2 microl min(-1) water supply rate and helium gas flow rate. Separation by HMGC develops not only a gas-solid partition but also a focusing effect on the water membrane. One feature of HMGC is that it gives a non-adsorption chromatogram based on the blocking effect of pre-adsorbed water; furthermore, despite the presence of a relatively large quantity of water, the electron impact ionization efficiency is kept the same as in the usual GC/MS condition. The detection limit with the injection of 1 microl of aquatic solution was estimated to be less than 0.1 ppb of low-molecular-weight fatty acids with s/n = 5 on a mass chromatogram at m/z 45. The HMGC/EI-MS system can be applied to the trace analysis of C1 to C3 volatile acids, volatile inorganic acids, and halogenated organic acids in water.     

Magneto-Optical Measurement of Organic Conductor Using Rotational Cavity System

We have developed a new magneto-optical measurement system using a rotational cavity system equipped with a millimeter vector network analyzer and a 14 T solenoid type super conducting magnet. The measurement can be performed in the transmission configuration down to 1.6 K. The results of the precise angular dependence measurement of quasi-one-dimensional organic conductor (DMET)₂I₃ using the new system are shown, and its Fermi surface will be discussed in connection with the previous reports.     

An efficient conversion of 1-abietic acid to (+)−3-deoxyaphidicolin

The first total synthesis of (+)?3-deoxyaphidicolin, a selective inhibitor of eukaryotic DNA polymerase α, has been completed efficiently and stereoselectively starting from 1-abietic acid.     

The interface of the Ising model and the Brownian sheet

We study the limit theorem related to the interface of the three-dimensional Ising model. Dobrushin proved that the interface does not fluctuate and becomes rigid for sufficiently large. We define the random fieldX ^L (t, s), 0t, s1, on the interface, and prove that X^L(t, s) converges to the Brownian sheet as L for sufficiently large, whereL denotes the size of the system. This result does not mean that the interface itself converges to the Brownian sheet.     

Inclusion behavior of thiacalix[4]arenetetrasulfonate toward water-miscible organic molecules studied by salting-out and X-ray crystallography

[reaction: see text] Inclusion ability of thiacalix[4]arenetetrasulfonate (TCAS) toward water-miscible organic molecules such as alcohols, ketones, cyclic ethers, and so on was studied by salting-out of the inclusion complex. NMR spectra of the recovered precipitates showed size selectivity to include the guest molecules. X-ray crystallographic analyses of TCAS salts including acetone and 1,4-dioxane suggested that guests are retained with the aid of cation coordination and H-bonding.     

Crystal structures of n-alkanes with branches of different size in the middle

We synthesized four branched n-alkane samples C35-C1, C35-C4, C35-C6, and C35-C4Ph with the same number of carbons as the main chain, n = 35, to which the methyl, butyl, hexyl, and butyl phenyl groups were respectively attached at the middle, and also the corresponding linear homologue of C35, and studied their crystalline structures from DSC, IR, and Raman spectroscopy, X-ray diffraction measurement, and computer simulation. Solid-solid phase transitions characteristic of linear alkane C35 are not observed for any branched alkanes, and their melting temperatures Tm are lowered to 325.2, 318.5, 314.3, and 314.1K, respectively. Main chains of branched alkane molecules are not folded, irrespective of length and chemical structure of branches, but are extended to take the planar zigzag form in the solid state. The branches of C35-C4 and C35-C6 are also aligned inside the crystal in the extended form. Data analyses on solution-grown crystallized samples reveal that, with increasing the branch length, their crystal structures transform from polymorphic forms of the orthorhombic (P2(1)2(1)2(1)) and the triclinic (P) for C35-C1 and C35-C4 to the unique triclinic form for C35-C6 and C35-C4Ph, so as to minimize extra surface energy invoked by introduction of long branches.     

Solvent extraction of alkali metal ions with chromium complexes

Solvent extraction of alkali metal ions by batch and counter-current distribution methods was investigated with tetrathiocyanatodiamminechromate(III) and tetrathiocyanatodianilinechromate(III) as reagents and nitromethane and nitrobenzene as organic solvents. The distribution ratios of alkali metal ions in the various systems were measured. Cesium was readily extracted with the aniline compound and nitrobenzene. The separation of sodium from potassium in trace amounts was possible by the counter-current distribution method.