Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

A novel pre-shearing technique for measurement of the electrorheological effect of a side-chain liquid crystalline polysiloxane

A side-chain liquid crystalline polysiloxane derivative possessing mesogens was synthesized. The mesogens included a large dielectrically-anisotropic moiety. Phase transition behaviour was investigated and the electrorheological (ER) effect of the polymer considered. No ER effect was observed in non-sheared polysiloxane derivative because of its high inherent viscosity. However, a large ER effect was observed after pre-shearing. Pre-shearing, i.e. shearing with a high shear rate before the measurements, arranges the terminal mesogens in the shearing direction. Furthermore, a dilution of the sample led to a larger ER effect exceeding 10 000 Pa. We thus were able to demonstrate a new approach for the appearance of the ER effect.     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Photoreaction of anthracenyl phosphine oxides: Usual reversible photo- and heat-induced emission switching,and unusual oxidative PC bond cleavage

Anthracenyl(diphenyl)phosphine oxide and dianthracenylphenylphosphine oxide as photoactive compounds have been synthesized. Anthracenyl group of these compounds indicate the multi-functional roles such as an emission component, a photodimerization component, and a leaving group. When the light irradiation was performed under an oxygen atmosphere, photo-oxidative PC bond cleavage to leave the antharacenyl group was observed. Moreover, phosphonyl radical was produced and then PP bond formation to form diphosphane was observed.     

Heterogeneous structure of silk fibers from Bombyx mori resolved by 13C solid-state NMR spectroscopy

The molecular conformation of silk fibrion is characterized by solid-state 13C NMR before spinning (silk I structure) and after spinning (silk II structure). We compare native silk fibers with the quasi-crystalline Cp-fraction and a synthetic model peptide (Ala-Gly)15, both of which can be converted either into silk I by dialysis from 9 M LiBr or into silk II by treatment with formic acid. Our results demonstrate that silk II fibers are intrinsically heterogeneous, consisting of beta-sheets, distorted beta-turns, and distorted beta-sheets. This higher-order heterogeneity is revealed by the 13C-NMR Cbeta-peak of Ala, indicating that the Ala side chains are stacked partially in parallel and partially face-to-face, at a ratio of 1:2.     

New catalytic cycle for couplings of aldehydes with organochromium reagents

[reaction: see text] A new catalytic cycle has been developed to effect all three subgroups of Cr-mediated couplings, i.e., (1) Ni/Cr-mediated alkenylation, alkynylation, and arylation, (2) Co/Cr-mediated 2-haloallylation, alkylation, and propargylation, and (3) Cr-mediated allylation. In the presence of chiral sulfonamide ligands, good asymmetric inductions can be achieved for some of the Ni/Cr-mediated alkenylation, Co/Cr-mediated 2-haloallylation and propargylation, and Cr-mediated allylation.     

Metal-metal d-d interaction through the discrete stacking of mononuclear M(II) complexes (M = Pt, Pd, and Cu) within an organic-pillared coordination cage

Two molecules of planar MII(acac)2 complexes (M = Pt, Pd, and, Cu; acac = acetylacetonato) are efficiently stacked within an organic-pillared coordination cage, exhibiting characteristic spectroscopies (for M = Pt and Pd) and electron spin-spin coupling (for M = Cu) attributable to metal-metal interaction.     

Determination of chloride by stripping chronopotentiometry with silver-film electrode

The experimental parameters of cathodic stripping chronopotentiometry of chloride at a silver-film electrode are investigated and optimized. The chloride preconcentration is achieved in the form of silver chloride by a controlled potential oxidation of the working electrode under vigorous stirring. Cathodic stripping of the deposit is obtained by the constant current, under the condition of diffusive mass transfer. Deaeration of the solution is not necessary. A detection limit of 35 μ dm⁻³ (10⁻⁶ mol dm⁻³) is obtained at a deposition time of 180 s, with a reproducibility of 6.7 % (expressed as relative standard deviation, RSD).     

Surprisingly efficient catalytic Cr-mediated coupling reactions

[reaction: see text] With use of 1 mol % of Cr catalyst 5, surprisingly efficient Cr-mediated couplings of aldehydes with various types of nucleophiles have been realized. The catalyst set of Cr catalyst 5 and Ni catalyst 4 is used for alkenylation, alkynylation, and arylation, whereas the catalyst set of Cr catalyst 5 and CoPc (cobalt phthalocyanine) is used for 2-haloallylation, alkylation, and propargylation. Only the Cr catalyst 5 is required for allylation. The reaction rates in DME and THF have been found significantly faster than that in MeCN.