Copolymerization of optically active N-bornylmaleimide with vinyl monomers

Optically active N-bornylmaleimide (NBMI) was copolymerized with styrene, methyl methacrylate, and vinylidene chloride with a free-radical catalyst to obtain optically active copolymers. The monomer reactivity ratios for the radical copolymerization of NBMI (M₂) with styrene, methyl methacrylate, and vinylidene chloride were: ST-NBMI, r₁ = 0.13, r₂ = 0.05; MMA-NBMI, r₁ = 2.02, r₂ = 0.16; VCl₂-NBMI, r₁ = 1.15, r₂ = 0.47. The Q-e values for NBMI were Q₂ = 0.48 and e₂ = +1.47. The specific rotation and optical rotatory dispersion of these copolymers were measured. The correlation between the specific rotation and composition of these copolymers was not linear. The value of λ_c for each copolymer was independent of the copolymer composition and the comonomer, being 260 mμ for the St-NBMI system, 262 mμ for the MMA-system, and 260 mμ for the VCl₂-NBMI system. The effects of solvents and temperature on the specific rotation of these copolymers were investigated.     

Asymmetric induction copolymerization. Cationic copolymerization of l-menthyl vinyl ether with indene and acenaphthylene

l-Menthyl vinyl ether (l-MVE) was homopolymerized and copolymerized with the monomers indene (IN) and acenaphthylene (ANp) by BF₃OEt₂ as a catalyst. The chiral menthyl substituent was cloven from the homopolymers and copolymers using dry-hydrogen bromide gas. After the removal of optically active menthyl group, poly(vinyl alcohol) (PVA) from l-MVE homopolymer was optically inactive, and copolymers (VA-IN, VA-ANp) from l-MVE-IN and l-MVE-ANp copolymers were still optically active. Hence, in the case of l-MVE homopolymer, it was concluded that asymmetric induction in the polymer main chain can only produce pseudoasymmetry. In the case of l-MVE-IN and l-MVE-ANp copolymers, it was found that asymmetric induction proceeded in the copolymer main chain and was caused by the influence of chiral menthyl group.     

Comparison of the compact dry TC method with the standard pour plate method (AOAC official method 966.23) for determining aerobic colony counts in food samples: Performance-tested method

Compact Dry TC qualifies as a rapid method kit for determining aerobic colony counts in foods. The plates are presterilized and contain culture medium and a cold-soluble gelling agent. The medium is rehydrated by inoculating 1 mL diluted sample into the center of the self-diffusible medium and allowing the solution to diffuse by capillary action. The plates can then be incubated and the colonies counted without any additional steps. The Compact Dry TC method was validated with 5 different raw meats. The performance tests were conducted at 35 degrees and 30 degrees C. In all required performance studies, no apparent differences were observed between the Compact Dry TC method and the Standard Pour Plate method (AOAC Official Method 966.23) for the detection level of aerobic microorganisms. For the accuracy claim (n = 60), a correlation factor of r2(35) = 0.9977 (35 degrees C) and r2(30) = 0.9932 (30 degrees C) could be assigned, as stated in the application for "Performance Tested Method." Quality consistency and storage robustness studies, showed no significant variations in plate count results with different production lots or plates of diverse storage age.     

Optically active copolyamides by melt and solution condensation polymerization

The melt and solution condensation copolymerization of nylon salts which were prepared from d-camphoric acid and adipic acid with hexamethylenediamine were carried out, and optically active copolyamides were obtained. The copolyamides obtained had a positive specific rotation. The specific rotations for the copolyamides increased with increasing content of d-camphoryl units in the copolymers. The optical rotatory dispersion of the copolyamides had positive curves and were found to fit the simple Drude equation. The λ_c values of the polymers obtained by the melt and solution condensation polymerization were 241 mμ and 245 mμ, respectively.     

Radiation-induced addition reaction of carbon tetrachloride onto 1,2-polybutadiene

The γ-ray-induced addition reaction of carbon tetrachloride onto syndiotactic 1,2-polybutadiene film and liquid 1,2-polybutadiene was carried out at room temperature. In the film gelation was pronounced and the rate of addition increased as the crystallinity of the polymer decreased. In the liquid gelation, which makes the polymer insoluble in carbon tetrachloride, did not take place, although a definite crosslinking reaction was noticed. In this case the appearance of the product changed from a viscous liquid to a white powder as the reaction proceeded. Its structure was compared with that of chlorinated 1,2-polybutadiene. The addition of carbon tetrachloride to the vinyl group in liquid 1,2-polybutadiene caused an anti-Markownikoff-type reaction and was accompanied by an unexpectedly large vinyl depletion in the polymer. The total decrease in the vinyl group was found to be much larger than that brought about by the addition of carbon tetrachloride. This discrepancy was attributed to a cyclization and crosslinking reaction ascribed to the vinyl group bound by the main chain. Cyclization and crosslinking were less noticeable in the chlorination than in the carbon tetrachloride.     

Motor protein nano-biomachine powered by self-supplying ATP

A new nano-biomachine has been created from microtubules (MTs) and hetero-bifunctional polymer particles bearing pyruvate kinase, which is propelled on glass surfaces coated with kinesin by use of self-supplying ATP.     

Steric effects upon transition states of radical addition polymerizations

Transition states (TSs) of radical addition homopolymerization reactions of methyl acrylate, methyl methacrylate, dimethyl itaconate, and N-methyl itaconimide were examined with two-unit radical models using MOPAC (PM3 UHF) semiempirical method. Calculated activation energies (E_as) show good correlations with experimental values. Calculated activation entropies (−ΔS^‡s) are found to be well proportional to E_as. The entropy terms play an important role as well as E_a in radical additions. E_a depends on the angle (θ_rs) between reaction points of radical and of monomer at TS. The bond length between reaction points at TS is constant regardless of monomers studied. The geometries and thermodynamical properties calculated here for TS indicate the importance of steric effects caused by substituted group(s) rather than electronic perturbation energies reported previously. © 1996 John Wiley & Sons, Inc.     

FS-property for -algebras

A -algebra is said to have the FS-property if the set of all self-adjoint elements in has a dense subset of elements with finite spectrum. We shall show that this property is not stable under taking the minimal -tensor products even in case of separable nuclear -algebras.

     

Review Article: Fructooligosaccharides Enzymatic Preparation and Biofunctions

I. INTRODUCTION

Recently the study of oligosaccharides has been extensively pursued in Japan after the findings of the remarkable biofunctions and usefulness of fructooligosac-charides for human health, improving the intestinal microflora and importance in livestock nutrition.     

Three-dimensional strain localization of water-saturated clay and numerical simulation using an elasto-viscoplastic model

Since strain localization is a precursor of failure, it is an important subject to address in the field of geomechanics. Strain localization has been analysed for geomaterials by several researchers. Many of the studies, however, treated the problems brought about by strain localization as two-dimensional problems, although the phenomena are generally three-dimensional. In the present study, undrained triaxial compression tests using rectangular specimens and their numerical simulation are conducted in order to investigate the strain localization behaviour of geomaterials under three-dimensional conditions. In the experiments, both normally consolidated and over-consolidated clay samples are tested with different strain rates. Using the distribution of shear strain obtained by an image analysis of digital photographs taken during deformation, the effects of the strain rates, the dilation, and the over-consolidation on strain localization are studied in detail. The analysis method used in the numerical simulation is a coupled fluid-structure finite element method. The method is based on the finite deformation theory, in which an elasto-viscoplastic model for water-saturated clay, which can consider structural changes, is adopted. The results of the simulation include not only the distribution of shear strain on the surfaces of the specimens, but also the distributions of strain, stress, and pore water pressure inside the specimens. Through a comparison of the experimental results and the simulation results, the mechanisms of strain localization are studied under three-dimensional conditions.