TR-LII for sizing of carbon particles forming at room temperature

Time-resolved laser-induced incandescence (TR-LII) was applied for the determination of particle sizes during carbon-particle formation from supersaturated atomic carbon vapor that was generated by laser photolysis of carbon suboxide (C₃O₂) at room temperature. Thus, the solid carbon particles were formed under hydrogen-free conditions. The TR-LII technique was used for in situ size measurement of growing carbon particles and samples of final particles were analyzed by transmission electron microscopy (TEM). It was found that the particles grow to a final size of 4–12 nm within 0.02–1 ms. The properties of the obtained particles depend on the initial conditions in the reaction volume, i.e. concentration of carbon suboxide, pressure and type of gas diluter, photolysis wavelength, and laser pulse energy. The comparison of TR-LII and TEM particle sizing results yields information about the effective thermal energy accommodation coefficients for He, Ar, CO, and C₃O₂ molecules on carbon particles. PACS 61.46.Df; 07.60.-j; 78.70.-g     

Microstructural investigation of monoglyceride-water coagel systems by NMR and CryoSEM

Monoglyceride coagels consist of a network of plate-like crystals and are formed from a swollen gel state (alpha-gel). In order to resolve the transition mechanism, coagels were prepared with monoglycerides that differ in fatty acid composition (monomyristate and palmitate/stearate, respectively). Rheology provided information on kinetics of coagel formation and the strength of the resulting crystal network. From NMR measurements, the surface-to-volume ratio, tortuosity, and dimensionality of the network were obtained. These findings were in line with qualitative and quantitative structural information obtained from CryoSEM. As a model for the behaviour of non-monoglyceride species, the dynamics of (perdeuterated) palmitic acid was monitored in both alpha-gels and coagels. The experimental data support a two-stage mechanism. In the first stage, two-dimensional separation of D- and L-isomers in the monoglyceride bilayers of the alpha-gel occurs. This process depends primarily on lateral diffusion rate of the monoglycerides. Palmitic acid can be accommodated in the alpha-gel bilayer, but in the coagels it is separated into relative mobile and mechanically weak junction zones between the crystal plates. In the second stage of coagel formation, the crystal plates also grow in the third dimension. Both monoglyceride type and concentration determine the kinetics of this process.     

Steroids and sex hormones. Quassinoid bitter principles. I. 1-oxo-2-methoxy-4 alpha-methyl-17 beta-hydroxy-delta2-5 alpha-androstene as a model for the ring a structure of quassine]

Starting from 3-oxo-17β-hydroxy-Δ¹-5α-androstene (2b) the preparation of 1-oxo-2-methoxy-4α-methyl-17β-hydroxy-Δ²-5α-androstene (9), a compound with the ring A structure of quassine (1) is described. The key problem of the reaction sequence is shown to be the monomethylation at C(4).     

Elektronentransfer und Ionenpaar-Bildung. 40. Mitteilung. Einkristall-Struktur von Bis(Natrium-1,1′-Biphenyl-2-thiolat-Diglyme): Ein Zwischenprodukt der reduktiven Ringöffnung von Dibenzothiophen

Electron Transfer and Ion Pair Formation Single Crystal Structure of Bis(sodium 1,1′-biphenyl-2-thiolate-diglyme): An Intermediate in the Reductive Ring Opening of Dibenzothiophene On Na-metal reduction of dibenzothiophene, the five-membered sulfur ring opens to form a colorless 1,1′-biphenyl-2-thiolate sodium salt, which, according to its single-crystal structure determination, is a dimer containing a four-membered, twice diglyme-solvated ring (diglyme···Na^⊕?SR)₂. Additional measurements provide the following information: cyclic voltammetry in aprotic MeCN solution shows one quasi-reversible electron transfer at E = ?2.58 V. The dibenzothiophene radical anion can be generated in aprotic THF solution at a K mirror and characterized by an 81-line ESR spectrum and its simulation. This blue species is also the first UV/VIS detectable one before the solution changes via green (due to blue + yellow color mixing) to yellow, yielding across an isosbestic point a second and diamagnetic compound. All of the above results suggest a consecutive two-electron reduction followed by an intersystem protonation, M + (e^?) → M^.? (blue) + (e^?) → (M^??, yellow?) + (H^⊕) → MH^? (colorless), to yield the crystallized and structurally characterized reaction intermediate. The diglyme-solvated sodium-salt dimer provides a basis for a quantum-chemical discussion of some facets of the most likely microscopic reduction pathway.     

Synthesis of (−)-Dihydroraputindole D by Enantioselective Benzoylation of a 1,3-Diol Intermediate

The enantioselective synthesis of (−)-dihydroraputindole D is reported. The key step is the desymmetrizing benzoylation of a prochiral 1,3-diol employing Trost′s ProPhenol catalyst system, which has been applied for the first time to a cyclic molecule carrying geminal hydroxymethyl groups. The cyclopenta[f]indoline system was assembled by Au(I)-catalyzed cyclization of an alkynylated indoline precursor. (−)-Dihydroraputindole D was obtained in 17 steps and 8% overall yield starting from dihydroxyacetone. In combination with quantum chemical calculations of the ECD spectra, our synthesis allowed us to determine the absolute configuration (5S,7R) of the natural product (+)-raputindole D from the Rutaceous plant Raputia simulans.     

Platinum solubility of a substance designed as a model for emissions of automobile catalytic converters

Automobile catalytic converters emit nanocrystalline platinum attached to alumina particles. For investigations about the bioavailability of Pt from these particles a model substance with approx. 5% Pt on alumina has been prepared and characterized by physical methods (ESCA, XRD, TEM, DTA, TG). Measuring the platinum solubility of these samples in different solvents revealed high amounts that can be explained assuming a corrosion process. The portion of soluble platinum is dependent on the particle size distribution. For a comparative study platinum black has been used. In general the platinum determination has been carried out by electrothermal atomic absorption spectrometry (ET-AAS). The comparison of ET-AAS results with determinations by adsorptive voltammetry (formazone method) allowed to distinguish between elemental and ionic platinum; in solution samples only ionic platinum has been present. UV spectra of extracts have been used for the semi-quantitative platinum speciation in solutions.