Rheology and fiber degradation during shear flow of carbon-fiber-reinforced polypropylenes

The processing of fiber-reinforced thermoplastics is often accompanied by a significant fiber fracture. Therefore, it is important to assess the effect of processing variables on the extent of fiber damage occurring during product fabrication, such as extrusion or injection molding. The present paper discusses fiber damage caused by shear forces exerted on the composite by a molten matrix in both experimental and theoretical terms. The degradation process in carbon fiber-polypropylene composites is studied in a broad range of shear rates, although it occurs significantly only under high shearing in a capillary. Changes in fiber length and its distribution during the multi-flow through a capillary, as well as the materials’ rheological properties found in research after shearing, are discussed and the results are compared with a model of fiber-length analysis for the mixing-regrinding process. Published in Russian in Vysokomolekulyamye Soedineniya, Ser. A, 2006, Vol. 48, No. 9, pp. 1628–1639. The text was submitted by the authors in English.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Cloning and sequence analysis of the poly(3-hydroxyalkanoic acid)-synthesis genes ofPseudomonas acidophila

Pseudomonas acidophila can grow with CO₂ as a sole carbon source by the possession of a recombinant plasmid that clones genes that confer chemolithoautotrophic growth ability derived from the H₂-oxidizing bacteriumAlcaligenes hydrogenophilus. H₂-oxidizing bacteria produce poly(3-hydroxybutyric acid) (PHB) from CO₂, but recombinant P.acidophila can produce the more useful biopolymer poly(3-hydroxyalkanoic acid) (PHA). In this study, thepha genes ofP. acidophila were cloned and a sequence analysis was carried out. A gene library was constructed using the cosmid vector pVK102. A recombinant cosmid carrying thepha genes was selected by the complementation of a PHB-negative mutant ofAlcaligenes eutrophus H16. The resulting recombinant cosmid pIK7 contained a 14.8-kb DNA insert. Subcloning was done, and the recombinant plasmid pEH74 was selected by hybridization with theA. eutrophus H16pha genes.Escherichia coli possessing pEH74 produced PHB, indicating that pEH74 contained thepha genes ofP. acidophila. The nucleotide sequences of the PHA-synthesis genesphaA (3-ketothiolase),phaB (acetoacetyl-CoA reductase), andphaC (PHA synthase) in pEH74 were determined. The homologies ofphaA, phaB, andphaC betweenP. acidophila andA. eutrophus H16 were 64.7, 76.1, and 56.6%, respectively.

     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Topologically conjugate Kleinian groups

Two Kleinian groups and are said to be topologically conjugate when there is a homeomorphism such that . It is conjectured that if two Kleinian groups and are topologically conjugate, one is a quasi-conformal deformation of the other. In this paper generalizing Minsky's result, we shall prove that this conjecture is true when is finitely generated and freely indecomposable, and the injectivity radii of all points of and are bounded below by a positive constant.

     

Temperature-Responsiveness of A-B-A Block Telomers at Solid-Liquid Interfaces

Macroinitiators were prepared by coupling disuccinimidyl ester of 4,4'-azobis(cyanovaleric acid) with poly(N-isopropylacrylamide) (PIPA), which had an amino group at its end. Styrene was telomerized with the initiators in THF. When the styrene content in the A-B-A block telomer obtained (PIPA-b-PSt-b-PIPA) was high, the telomer formed an irreversible aggregation resulting in microspheres, whereas the telomer with a much shorter styrene block could be dispersed monomolecularly. The telomers dispersed in water were aggregated by raising the temperature above 32 degrees C due to a coil-globule transition of PIPA moieties. The PIPA-b-PSt-b-PIPA could be strongly adsorbed to polystyrene (PSt) solid surfaces to form a layer, and the PSt blocks might lay on the PSt surface and the PIPA blocks might direct to the solution phase. The contact angle of air bubbles on the surface of telomer-coated PSt in the air-in-water system was dependent on temperature; that is, with the increase in temperature the contact angle of air bubbles largely decreased and leveled off above the coil-globule transition temperature (Tc). Correspondingly, the amount of protein Concanavalin A adsorbed to the telomer layer deposited on the PSt surface increased gradually with an increase in temperature and leveled off above the Tc. These phenomena were attributed to the changes in hydrophobicity of the telomer layer below and above the Tc. The usefulness of macroinitiators in preparing various kinds of block telomers which have responsiveness to external stimuli was strongly suggested. Copyright 1999 Academic Press.     

trans-2,2'-Bi(1-phenyladamantylidene): the most twisted biadamantylidene

The Grignard coupling of 2,2-dibromo-1-phenyladamantane gave trans-2,2'-bi(1-phenyladamantylidene) (1-Ph). Single-crystal X-ray analysis indicated that 1-Ph has a 23.2 degrees twisted double bond, which is much more distorted than that of parent 2,2'-biadamantylidene (1-H) and that of the ethyl-substituted derivative (1-Et). A cyclic voltammogram showed a reversible electron oxidation wave at 0.87 V vs Fc/Fc(+), which is 0.19 V lower than 1-H, indicating a significant increase in the HOMO energy level due to the distortion. The reaction of 1-Ph with 0.9 equiv of bromine gave an intramolecular Friedel-Crafts alkylation product, while bromination of 1-H and 1-Me has been reported to give a bridged bromonium ion and a rearranged product, 2-(1-methyl-2-adamantylidene)-4-bromotricyclo[5,3,1,0(3.9)]undec-4-ene, respectively.     

Electron microscope observation of lattice defects in the FeCr σ-phase

The lattice image of the FeCr σ-phase was observed by high-resolution electron microscopy with the c axis of the tetragonal cell parallel to the incident beam. It was found that bright dots of the observed image correspond to the positions of atoms in the $\text{z = ±}\text{1}\text{4}$ planes of the σ-phase structure. Sequence faults were found in the irregular part of the lattice image. The analysis of the faults shows that an extra plane of $\text{1}\text{2}\text{a}{}_0$ width is inserted into the regular structure and one side of the fault is slightly shifted parallel to the fault plane with respect to the other side, which is consistent with the model proposed by Frank and Kasper. A unit cell step of the sequence faults was found and a model of the step was proposed.