Classical in-plane negative magnetoresistance and quantum positive magnetoresistance in undoped InSb thin films on GaAs (1 0 0) substrates

Magnetoresistance (MR) effects have been investigated in perpendicular and parallel magnetic fields at 300, 80 K and liquid He temperatures for undoped InSb thin films 0.1–2.3 μm thick grown on GaAs(1 0 0) substrates by MBE. At high temperatures, the intrinsic carriers show the parabolic negative MR observable only in magnetic fields parallel to the film. The skipping-orbit effect due to surface boundary scattering in the classical orbits in the plane vertical to the film has been argued to be responsible for the negative MR. At low temperatures (T=80 K), the transport is dominated by the two-dimensional (2D) electrons in the accumulation layers at the InSb/GaAs(1 0 0) hetero interface; MR is positive and shows a logarithmic increase with anisotropy between parallel and perpendicular field orientation, arising from the 2D weak anti-localization (WAL) that reflects the interplay between the spin-Zeeman effect and strong spin–orbit interaction caused by the asymmetric potential at the interface (Rashba term). The zero-field spin splitting energy of Δ₀13 meV, the electron effective mass of m^*0.10m₀ seven times of the band edge mass in bulk InSb and the effective g-factor of |g^*|15 in the accumulation layer have been inferred from fits of MR for the 0.1 μm thick film to the 2D WL theory.     

Mass spectra of sulfinamide derivatives and identification of their thermal decomposition products

The mass spectra of 30 sulfinamide derivatives (RSONHR', R' alkyl or p-XC₆H₄) are reported. Most of the spectra had peaks attributable to thermal decomposition products. For some compounds these were identified by pyrolysis under similar conditions to be: RSO₂NHR', RSO₂SR, RSSR and NH₂R' (in all kinds of sulfinyl amides); RSNHR' (in the case of arylsulfinyl arylamides); RSO₂C₆H₄NH₂, RSOC₆H₄NH₂ and RSC₆H₄NH₂ (in the case of arylsulfinyl arylamides of the type of X = H) The mass spectra of the three thermally stable compounds showed that there are several kinds of common fragment ions. The mass spectra of the thermally labile compounds had two groups of ions; (i) characteristic fragment ions of the intact molecules and (ii) the molecular ions of the thermal decomposition products. It was concluded that the sulfinamides give the following ions after electron impact: [M]⁺, [M ? R]⁺, [M ? R + H]⁺, [M ? SO]⁺, [RS]⁺, [NHR']⁺, [NHR' + H]⁺, [RSO]⁺, [RSO + H]⁺, [R]⁺, [R + H]⁺, [R']⁺ and [M ? OH]⁺, and that the thermal decomposition products give the following ions: [RSO₂SR]⁺, [RSSR]⁺, [M ? O]⁺, [M + O]⁺ and [RSOC₆H₄NH₂]⁺.     

Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

The Effect of β-Nitro Group on the Reactivity and the Stereoselectivity of Amidation of Bicyclic Acids by Dehydration with DCC

Amidation of exo/endo mixture of β-nitro bicyclic acids by dehydration with DCC, gives only the corresponding exo-amides.     

Tailoring of ionic supramolecular assemblies based on ammonium carboxylates toward liquid‐crystalline micellar cubic mesophases

Ionic liquid crystals based on ionic complexation of tris(2‐aminoethyl)amine (1) with 3,4,5‐tris(7,7,8,8,9,9,10,10,11,11,12,12,12‐tridecafluorododecyloxy)benzoic acid (2) and with 3,4,5‐tris(2‐octyldodecyloxy)benzoic acid (3) were investigated. The ionic complex with the partially fluorinated alkyl chains (1·2) exhibited a morphological transition from a hexagonal columnar mesophase to a Pm3n micellar cubic phase upon increasing the molar ratio of 2 to 1. For the complex with the branched alkyl chains (1·3) a micellar cubic mesophase was exclusively generated at appropriate composite ratios. The generation of the micellar cubic mesophases is attributed to the introduction of the laterally expanded volume of the alkyl chains compared with the corresponding normal dodecyl chains. Their thermal stabilities were most enhanced at a specific molar ratio of 1:5 for 1·2 and 1:4 for 1·3. This result corresponds to the most suitable chain volume for the stable micellar cubic mesophase.     

Synthesis and reactions of optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl-(o-methoxyphenyl)phosphine-borane

Cyclohexyl(o-methoxyphenyl)menthyloxyphosphineborane and t-butyl(o-methoxyphenyl)menthyloxyphosphine-borane were prepared from dichlorocyclohexylphosphine and t-butyldichlorophosphine by successive treatments with (−)-menthol, o-methoxyphenylmagnesium bromide, and borane-THF complex. The separated pure diastereomers of each of the compounds underwent reaction with lithium naphthalenide to afford optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl(o-methoxyphenyl)phosphine-borane, respectively. These secondary phosphine-boranes reacted readily with various electrophiles in the presence of bases with virtually net retention of configuration. A new chiral phosphine ligand, (S,S)-1,2-bis[cyclohexyl(o-methoxyphenyl)phosphino]ethane was synthesized via the optically pure phosphine-boranes.     

Quantification of ATRP initiator density on polymer latex particles by fluorescence labeling technique using copper‐catalyzed azide‐alkyne cycloaddition

We developed a novel fluorescence labeling technique for quantification of surface densities of atom transfer radical polymerization (ATRP) initiators on polymer particles. The cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) polymer latex particles carrying ATRP‐initiating chlorine groups were prepared by emulsifier‐free emulsion polymerization of styrene (St), 2‐(2‐chloropropionyloxy)ethyl methacrylate (CPEM), and N‐n‐butyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonium bromide (C₄DMAEMA). ATRP initiators on the surface of polymer particles were converted into azide groups by sodium azide, followed by fluorescent labeling with 5‐(N,N‐dimethylamino)‐N′‐(prop‐2‐yn‐1‐yl)naphthalene‐1‐sulfonamide (Dansyl‐alkyne) by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The reaction time required for both azidation of ATRP‐initiating groups and successive fluorescence labeling of azide groups with Dansyl‐alkyne by CuAAC were investigated in detail by FTIR and fluorescence spectral measurement, respectively. The ATRP initiator densities on the cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) particle surfaces were estimated to be 0.21 and 0.15 molecules nm^?2, respectively, which gave close agreement with values previously determined by a conductometric titration method. The fluorescence labeling through click chemistry proposed herein is a versatile technique to quantify the surface ATRP initiator density both on anionic and cationic polymer particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4042–4051     

Hydrogen bond network-stabilisation of blue phases by addition of a chiral N-(10-hydroxydecyl)succinimide derivative and alkane diols

Blue phases (BPs) obtained by doping a commercially available liquid crystalline compound (4-butyl-N-(4-ethoxybenzylidene)aniline (EBBA)) with (2R,3R)-2,3-bis(4-octyloxyphenylbenzoyloxy)-N-(hydroxydecyl)succinimide (1) were highly stabilised by the addition of a small amount of alkane diols. Especially, addition of only 0.5 mol% of octane-1,8-diol increased the BP–Iso transition temperature by 10 K and widened the BP temperature range up to 35 K. A model stabilisation mechanism based on the construction of a hydrogen bond network in each disclination zone in BPs was proposed.     

Radiation damage in Si photodiodes by high-temperature irradiation

Results are presented of a detailed study of the effects of high-temperature 4-MeV neutron irradiation on the performance degradation of Si pin photodiodes together with the radiation-induced defects, observed by deep level transient spectroscopy. The degradation of the device performance and the introduction rate of the lattice defects decrease with increasing sample temperature during irradiation. For a 250°C irradiation, the reduction of the reverse current is only 20% of the starting value. This result suggests that the creation and recovery of the radiation damage proceeds simultaneously at high temperatures. Carbon-related complex as hole capture levels is also mainly responsible for the device degradation for high-temperature neutron irradiation.