Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Nature of the active component in the catalytic system prepared from titanium(III) chloride(AA), ethylaluminum dichloride,and tetrakis(dimethylamino)silane,in the polymerization of propylene

The chemistry of the titanium(III) chloride(AA)–ethylaluminum dichloride–tetrakis-(dimethylamino)silane system for the polymerization of propylene was studied. A complex of ethylaluminum dichloride with tetrakis(dimethylamino)silane was isolated. It was shown that this complex contains ethylaluminum dichloride and tetrakis(dimethylamino)silane in the ratio of 2:1. This complex with titanium(III) chloride is responsible for the polymerization activity.     

Coarse Metal Powder-Assisted pulsed CO2 Laser-induced Breakdown Spectroscopy for the Direct Determination of Heavy Metals in Soil

A novel method of laser-induced plasma spectroscopy utilizing a pulsed transversely excited atmospheric CO₂ laser has been developed for the high-sensitivity determination of heavy metals in soil. A coarse metal powder was used to trap the soil and to assist with plasma generation. When the CO₂ laser (10.6?µm, 1.5?J, 200?ns) was irradiated on the metal and soil powder, a high-temperature and long-lifetime luminous plasma was induced. Fine particles of soil were dissociated and were excited in the plasma region. The method was used for the rapid determination of Cr, Pb, and Hg in loam. The limits of detection for Cr, Pb, and Hg were approximately 0.8, 15, and 0.7?mg/kg, respectively.     

Comprehensive synthesis of ER related high-mannose-type sugar chains by convergent strategy

Systematic synthesis of high-mannose-type sugar chains of asparagine-linked glycoproteins is described. To construct the target sugar chains, we employed the convergent route, using three oligosaccharide components, the common hexasaccharide, branched tri-, tetra- and pentasaccharides, and mono-, di-, and triglucosyl fragments. Construction of the β-mannoside linkage was performed using p-methoxybenzyl-assisted intramolecular aglycon delivery. The hexasaccharide fragment was coupled with the branched mannooligosaccharide donors such as M5, M4B, M4C, and M3 to give undecasaccharide (M9), decasaccharide (M8B and M8C), and nonasaccharide (M7), respectively. Incorporation of mono-, di-, and triglucosyl fragments toward them gave tetradecasaccharide (G3M9), tridecasaccharide (G2M9), dodecasaccharide (G1M9), undecasaccharide (G1M8B and G1M8C), and decasaccharide (G1M7), respectively.     

Copolymerization of propylene with acrylate by a Ziegler-Natta type catalyst

Propylene was polymerized by using a Ziegler-Natta type catalyst in the presence of ethylchloroaluminum acrylate, which was formed by the reaction of diethylaluminum chloride with acrylic acid. The polymer obtained contained acrylic units which were proved to be copolymerized with propylene units by solvent extraction, infrared spectrum, and NMR spectrum. The copolymer showed much improved properties compared with the polypropylene homopolymer.     

Spectrochemical analysis of powder using 355 nm Nd-YAG laser-induced low-pressure plasma

The applicability of spectrochemical analysis of minute amounts of powder samples was investigated using an ultraviolet Nd-YAG laser (355 nm) and low-pressure ambient air. A large variety of chemical powder samples of different composition were employed in the experiment. These included a mixture of copper(II) sulfate pentahydrate, zinc sulfide, and chromium(III) sulfate n-hydrate powders, baby powder, cosmetic powders, gold films, zinc supplement tablet, and muds and soils from different areas. The powder samples were prepared by pulverizing the original samples to an average size of around 30 μm in order to trap them in the tiny micro holes created on the surface of the quartz subtarget. It was demonstrated that in all cases studied, good quality spectra were obtained with low background, free from undesirable contamination by the subtarget elements and featuring ppm sensitivity. A further measurement revealed a linear calibration curve with zero intercept. These results clearly show the potential application of this technique for practical qualitative and quantitative spectrochemical analysis of powder samples in various fields of study and investigation.     

SUNBURN CELL: FACTORS INVOLVED IN ITS FORMATION.

Abstract— The sunburn cell (SC) is a type of individual cell death appearing in epidermis principally after exposure to middle-wavelength UV radiation (UVR). Because SC_s can easily be recognized by histologic characteristics, they may provide a countable index of assessment of the degree of UVR injuries. However, despite extensive investigations, the mode of formation of this UVR-induced apoptosis has not fully been understood. In this review article, we are summarizing the results of recent studies with special reference to both the formation mechanisms and their implications in the field of photobiology.     

Photochemical synthesis of heteroatom-containing polycyclic aromatic compounds

Anthra[2,1-b]furan, anthra[2,1-b]benzo[d]furan, anthra[2,1-b]thiophene, anthra[1,2-b]thiophene, anthra[2,1-b]benzo[d]thiophene, anthra[2,1-b]pyrrole and naphtho[2,3-c]carbazole derivatives were synthesized in fairly good yields by a one-pot photocycloaddition reaction of 2,3-disubstituted 1,4-naphthoquinone with 1,1-diarylethylene. This is the first reported synthesis of these aromatic compounds.