Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .     

Compact optical duplicate system for satellite-ground laser communications: application of averaging effects

In recent years, there has been considerable interest in satellite-ground laser communication due to an increase in the quantity of data exchanged between satellites and the ground. However, improving the quality of this data communication is necessary as laser communication is vulnerable to air fluctuation. We first verify the spatial and temporal averaging effects using light beam intensity images acquired from middle-range transmission experiments between two ground positions and the superposition of these images using simulations. Based on these results, we propose a compact and lightweight optical duplicate system as a multi-beam generation device with which it is easy to apply the spatial averaging effect. Although an optical duplicate system is already used for optical correlation operations, we present optimum design solutions, design a compact optical duplicate system for satellite-ground laser communications, and demonstrate the efficacy of this system using simulations.     

Comparison of ultrasonic degradation rates constants of methylene blue at 22.8 kHz, 127 kHz, and 490 kHz

Techniques such as solvent extraction, incineration, chemical dehalogenation, and biodegradation have been investigated for the degradation of hazardous organic compounds. We found ultrasound to be an attractive technology for the degradation of hazardous organic compounds in water. However, the effects of ultrasonic frequency on degradation rate constants were not investigated quantitatively. In this study, the degradation process of a model for hazardous organic compound methylene blue was investigated using ultrasonic irradiation. The study focused on the effects of ultrasonic frequency and ultrasonic power on the degradation rate constant. The apparent degradation rate constants were estimated based on time dependence of methylene blue concentration assuming pseudo-first-order kinetics for the decomposition. A linear relationship between the apparent degradation rate constant and ultrasonic power was identified. In addition, the apparent degradation rate constants at frequencies of 127 and 490 kHz were much larger than those at 22.8 kHz. A relationship between the apparent degradation rate constant and the sonochemical efficiency value (SE value) was also found. Based on these results, a simple model for estimating the apparent degradation rate constant of methylene blue based on the ultrasonic power and the SE value is proposed in this study.     

Synthetic studies on indoles and related compounds. XXXI. Chemical confirmation of the synthetic route for the benz[f]indole skeleton and its application

To confirm the structure of ethyl 9-methoxybenz[f]indole ( 8a ) prepared from ethyl pyrrole-2-carboxylate ( 4 ) via a new synthetic route, the following chemical correlation work was performed. Ethyl 9-methoxybenz[f]in-dole ( 8a ) was converted to 1-benzyl-3-methyl-5,6,7,8-tetrahydrobenz[f]indole ( 25 ), which was alternatively and authentically synthesized from ethyl 3-methylpyrrole-2-carboxylate ( 11 ). On the basis of the established route to the benz[f]indole nucleus, two representative benz[f]indoles, benz[f]indole ( 1 ) and 4,9-dioxobenz[f]indole ( 26 ) were synthesized.     

A facile synthesis of novel 1,2-diazepino[3,4-b]quinoxalines by a 1,3-dipolar cycloaddition reaction

The 1,3-dipolar cycloaddition reaction of the quinoxaline 4-oxides 4a,b with 2-chloroacrylonitrile gave the 2,3-dihydro-1H-1,2-diazepino[3,4-b]quinoxalines 5a,b , respectively, which were converted into the 2,3,4,6-tetrahydro-1H-1,2-diazepino[3,4-b]quinoxalines 7a,b and 8a,b , respectively.     

Effect of a tridentate ligand on the structure, electronic structure, and reactivity of the copper(I) nitrite complex: role of the conserved three-histidine ligand environment of the type-2 copper site in copper-containing nitrite reductases

It is postulated that the copper(I) nitrite complex is a key reaction intermediate of copper containing nitrite reductases (Cu-NiRs), which catalyze the reduction of nitrite to nitric oxide (NO) gas in bacterial denitrification. To investigate the structure-function relationship of Cu-NiR, we prepared five new copper(I) nitrite complexes with sterically hindered tris(4-imidazolyl)carbinols [Et-TIC = tris(1-methyl-2-ethyl-4-imidazolyl)carbinol and iPr-TIC = tris(1-methyl-2-isopropyl-4-imidazolyl)carbinol] or tris(1-pyrazolyl)methanes [Me-TPM = tris(3,5-dimethyl-1-pyrazolyl)methane; Et-TPM = tris(3,5-diethyl-1-pyrazolyl)methane; and iPr-TPM = tris(3,5-diisopropyl-1-pyrazolyl)methane]. The X-ray crystal structures of all of these copper(I) nitrite complexes were mononuclear eta(1)-N-bound nitrite complexes with a distorted tetrahedral geometry. The electronic structures of the complexes were investigated by absorption, magnetic circular dichroism (MCD), NMR, and vibrational spectroscopy. All of these complexes are good functional models of Cu-NiR that form NO and copper(II) acetate complexes well from reactions with acetic acid under anaerobic conditions. A comparison of the reactivity of these complexes, including previously reported (iPr-TACN)Cu(NO2) [iPr-TACN = 1,4,7-triisopropyl-1,4,7-triazacyclononane], clearly shows the drastic effects of the tridentate ligand on Cu-NiR activity. The copper(I) nitrite complex with the Et-TIC ligand, which is similar to the highly conserved three-histidine ((His)3) ligand environment in the catalytic site of Cu-NiR, had the highest Cu-NiR activity. This result suggests that the (His)3 ligand environment is essential for acceleration of the Cu-NiR reaction. The highest Cu-NiR activity for the Et-TIC complex can be explained by the structural and spectroscopic characterizations and the molecular orbital calculations presented in this paper. Based on these results, the functional role of the (His)3 ligand environment in Cu-NiR is discussed.     

Amide-induced phase separation of hexafluoroisopropanol-water mixtures depending on the hydrophobicity of amides

Amide-induced phase separation of hexafluoro-2-propanol (HFIP)-water mixtures has been investigated to elucidate solvation properties of the mixtures by means of small-angle neutron scattering (SANS), (1)H and (13)C NMR, and molecular dynamics (MD) simulation. The amides included N-methylformamide (NMF), N-methylacetamide (NMA), and N-methylpropionamide (NMP). The phase diagrams of amide-HFIP-water ternary systems at 298 K showed that phase separation occurs in a closed-loop area of compositions as well as an N,N-dimethylformamide (DMF) system previously reported. The phase separation area becomes wider as the hydrophobicity of amides increases in the order of NMF < NMA < DMF < NMP. Thus, the evolution of HFIP clusters around amides due to the hydrophobic interaction gives rise to phase separation of the mixtures. In contrast, the disruption of HFIP clusters causes the recovery of the homogeneity of the ternary systems. The present results showed that HFIP clusters are evolved with increasing amide content to the lower phase separation concentration in the same mechanism among the four amide systems. However, the disruption of HFIP clusters in the NMP and DMF systems with further increasing amide content to the upper phase separation concentration occurs in a different way from those in the NMF and NMA systems.     

Mechanistic study on the reaction of pinB-BMes2 with alkynes based on experimental investigation and DFT calculations: gradual change of mechanism depending on the substituent

Transition metal-free direct and base-catalyzed 1,2-diborations of arylacetylenes using pinB-BMes₂ provided a syn/anti-isomeric mixture of diborylalkenes. The kinetic analysis showed that the reaction rate and isomer ratio were affected by reaction conditions and substituents on the aryl ring. DFT calculations indicated that direct addition proceeded via the interaction of acetylene-π with the BMes₂ fragment. In contrast, for the base-catalyzed diboration, the previously isolated sp²–sp³ diborane and borataallene were confirmed as stable intermediates by calculations. The whole reaction pathways can be divided into the Bpin-migration and deprotonation steps, where the borataallene should be considered as a common intermediate. It should be noted that the deprotonation step is reversible and affords the kinetically less favoured isomer under the thermodynamic conditions. As a result, the composition of isomeric products, in the base-catalyzed diboration, is attributed to the small difference of activation barriers between direct and base-catalyzed systems.

Combination of kinetic and DFT studies revealed a subtle balance for substituent effect toward the regioselectivity of the product in metal-free and base-catalyzed diboration of arylacetylenes.     

Synthesis of pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction. An additional reaction mechanism via an aziridine intermediate

The reaction of the 2-substituted 6-chloroquinoxaline 4-oxides 1a or 1b with 2-fold molar amount of methyl propiolate resulted in the 1,3-dipolar cycloaddition reaction to give 8-chloro-1,3-bismethoxycarbonyl-4-(piperidin-1-yl)pyrrolo[1,2-a]quinoxaline 4a or 8-chloro-1,3-bismethoxycarbonyl-4-(morpholin-4-yl)pyrrolo-[1,2-a]quinoxaline 4b , respectively. Compound 4a or 4b was transformed into 8-chloro-3-methoxycarbonyl-4-(piperidin-1-yl)pyrrolo[1,2-a]quinoxaline 5a or 8-chloro-3-methoxycarbonyl-4-(morpholin-4-yl)pyrrolo[1,2-a]-quinoxaline 5b , respectively. The structure of 4a,b was confirmed by the NOE measurement among the C₁ -H , C ₂-H and C ₉-H proton signals of 5a,b . An additional reaction mechanism was proposed for the ring transformation of isoxazolo[2,3-a]quinoxalines into pyrrolo[1,2-a]quinoxalines.     

Simultaneous and rapid determination of gefitinib,erlotinib and afatinib plasma levels using liquid chromatography/tandem mass spectrometry in patients with non‐small‐cell lung cancer

A simultaneous, selective, sensitive and rapid liquid chromatography/tandem mass spectrometry method was developed and validated for the quantification of gefitinib, erlotinib and afatinib in 250 μL samples of human blood plasma. Diluted plasma samples were extracted using a liquid‐phase extraction procedure with tert‐butyl methyl ether. The three drugs were separated by high‐performance liquid chromatography using a C₁₈ column and an isocratic mobile phase running at a flow rate of 0.2 mL/min for 5 min. The drugs were detected using a tandem mass spectrometer with electrospray ionization using imatinib as an internal standard. Calibration curves were generated over the linear concentration range of 0.05–100 nm in plasma with a lower limit of quantification of 0.01 or 0.05 nm for all compounds. Finally, the validated method was applied to a clinical pharmacokinetic study in patients with nonsmall‐cell lung cancer (NSCLC) following the oral administration of afatinib. These results indicate that this method is suitable for assessing the risks and benefits of chemotherapy in patients with NSCLC and is useful for therapeutic drug monitoring for NSCLC treatment. As far as we know, this is the first report on LC‐MS/MS method for the simultaneous quantification of NSCLC tyrosine kinase inhibitor plasma concentrations including afatinib. Copyright © 2015 John Wiley & Sons, Ltd.