Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Application of novel SIMS technique for imaging the active sites of oxygen reduction at the SOFC cathode/electrolyte interfaces

The oxygen reduction active sites were visualized around the O₂/SOFC cathode/electrolyte triple phase boundaries (TPB) by the¹⁶O/¹⁸O exchange techniques and secondary ion mass spectrometry (SIMS) analysis. The higher¹⁸O concentration is observed on the cathode top surfaces (La_0.9Sr_0.1MnO₃-mesh, Au-mesh, and Ag-porous), which suggested the promotion of oxygen adsorption and oxygen surface exchange at the cathode. The oxygen diffusion through the bulk of cathode occurred at the La_0.9Sr_0.1MnO₃-mesh and the Ag-porous cathodes, not at the Au-mesh cathode. On the YSZ surfaces after removing the cathode, the active sites for oxygen incorporation were analyzed by SIMS. The active sites for oxygen incorporation were at the La_0.9Sr_0.1MnO₃/YSZ interface as well as the TPB. On the other hand, the active sites for oxygen incorporation are limited to the TPB in the case of the Au-mesh removed YSZ surface. From the SIMS analysis, the expansion of the active sites for oxygen incorporation is less than a few μm from the TPB lines. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

Tetrakis-acridinyl peptide: a novel fluorometric reagent for nucleic acid analysis based on the fluorescence dequenching upon DNA binding

Tetrakis-acridinyl peptide 1 assuming a right-handed helical stacked conformation of the acridinyl units can bind to DNA duplex with a very high affinity of 10(8) (M-bp)(-1) even at a high salt concentration of 0.2 M NaCl, irrespective of the base composition. Peptide 1 gave rise to 1600-times enhancement of its fluorescence upon binding to an AT polymer due to the collapse of this stacked structure, but the fluorescence is not enhanced with a GC polymer, though the binding constants of 1 for both polymers were the same.     

In Situ Immobilization of Ultrafine Particles Synthesized in a Water/Oil Microemulsion

We investigated the in situ immobilization of ultrafine particles synthesized in a water/oil (w/o) microemulsion to silica for its possible application to supported metal catalysts. ZnS particles immobilized to silica by the ME method were consistent with those synthesized in a w/o microemulsion. Therefore, ZnS particles in a w/o microemulsion could be immobilized to silica without aggregation by this method. The relationship between the method of synthesizing Rh ultrafine particles in a w/o microemulsion and the diameter and diameter distribution of Rh particles immobilized to silica was studied. Rh-SiO(2) catalysts with a sharp diameter distribution could be prepared by immobilizing Rh-hydrazine complex particles because these complex particles would be very stable in a w/o microemulsion. The Rh particle diameters of Rh-SiO(2) catalysts prepared by changing the amount of silica produced were almost identical. Accordingly, the Rh particle diameter of Rh-SiO(2) catalysts could be controlled independently of Rh content by the ME method. Copyright 2001 Academic Press.     

Synthesis of Molecular Wires of Linear and Branched Bis(terpyridine)‐Complex Oligomers and Electrochemical Observation of Through‐Bond Redox Conduction

Films of linear and branched oligomer wires of Fe(tpy)₂ (tpy=2,2′:6′,2′′‐terpyridine) were constructed on a gold‐electrode surface by the interfacial stepwise coordination method, in which a surface‐anchoring ligand, (tpy? C₆H₄N?NC₆H₄? S)₂ ( 1 ), two bridging ligands, 1,4‐(tpy)₂C₆H₄ ( 3 ) and 1,3,5‐(C?C? tpy)₃C₆H₃ ( 4 ), and metal ions were used. The quantitative complexation of the ligands and Fe^II ions was monitored by electrochemical measurements in up to eight complexation cycles for linear oligomers of 3 and in up to four cycles for branched oligomers of 4 . STM observation of branched oligomers at low surface coverage showed an even distribution of nanodots of uniform size and shape, which suggests the quantitative formation of dendritic structures. The electron‐transport mechanism and kinetics for the redox reaction of the films of linear and branched oligomer wires were analyzed by potential‐step chronoamperometry (PSCA). The unique current‐versus‐time behavior observed under all conditions indicates that electron conduction occurs not by diffusional motion but by successive electron hopping between neighboring redox sites within a molecular wire. Redox conduction in a single molecular wire in a redox‐polymer film has not been reported previously. The analysis provided the rate constant for electron transfer between the electrode and the nearest redox‐complex moiety, k₁ (s^?1), as well as that for intrawire electron transfer between neighboring redox‐complex moieties, k₂ (cm² mol^?1 s^?1). The strong effect of the electrolyte concentration on both k₁ and k₂ indicates that the counterion motion limits the electron‐hopping rate at lower electrolyte concentrations. Analysis of the dependence of k₁ and k₂ on the potential gave intrinsic kinetic parameters without overpotential effects: k₁⁰=110 s^?1, k₂⁰=2.6×10¹² cm² mol^?1 s^?1 for [n Fe 3 ], and k₁⁰=100 s^?1, k₂⁰=4.1×10¹¹ cm² mol^?1 s^?1 for [n Fe 4 ] (n=number of complexation cycles).     

Novel synthesis of macrocycles with 1,1′-binaphthalene-2,2′-diol using intramolecular oxidative coupling

A new series of BINOL-based macrocycles with two phenolic protons have been synthesized via oxidative coupling reaction using CuCl(OH)-TMEDA.     

Quantitative determination of benzalkonium chloride in treated wood by solid-phase extraction followed by liquid chromatography with ultraviolet detection

Ammoniacal copper quat (ACQ) compound wood preservative is comprised of copper and quaternary ammonium compounds with benzalkonium chloride (BAC) as the active ingredient. Solid-phase extraction (SPE) followed by liquid chromatography with ultraviolet detection (LC-UV) was developed for quantitative determination of BAC in treated wood. Five species of wood were used, Japanese cedar (Cryptomeria japonica), Japanese larch (Larix leptolepis), Yezo spruce (Picea jezoensis), Sakhalin fir (Abies sachalinensis), and western hemlock (Tsuga heterophylla). BAC used in the present study was composed of 66% C12, 33% C14 and less than 1% C16. BAC was added to each wood species (500 mg) then extracted with HCl-ethanol (20 ml) and quantitatively determined with LC-UV (262 nm). Wood extractives from the heartwood of each species, except western hemlock, interfered with quantitative determination of BAC, but SPE with an Oasis MCX cartridge was effective in preventing this. Using the present methods, BAC homologue peaks were clearly confirmed without interference. Recoveries from wood ranged from 92 to 101% and the limit of quantitation was approximately 240 microg/g wood for the C12 and C14 homologues.