Synthesis,characterization and biological screening studies of mixed ligand complexes using flavonoids as precursors

Flavonoids are a group of plant phenolics that provide various health benefits through cell signalling pathways and antioxidant effects. In the present study, a new series of mixed ligand complexes of Co(II), Ni(II), Cu(II) and Zn(II) were synthesized by incorporating curcumin and quercetin flavonoid precursors. The structural features of the synthesized complexes were explored using elemental analysis, thermogravimetric analysis, UV–visible, infrared, NMR, mass and electron paramagnetic resonance spectral analyses and conductivity measurements. These data support an octahedral geometry of the synthesized complexes. In silico biological activity score for the ligand was predicted using PASS online software. ADMET properties were studied using VLS3D online software. Anti‐inflammatory and antioxidant activities were experimentally validated which prove that theoretical predictions are in agreement with the experimental results. Interestingly the synthesized complexes interact with calf thymus DNA through groove binding mode. Moreover, they have good potential to cleave pUC19 DNA. Minimum inhibitory concentration values of the synthesized complexes reveal that they have better antimicrobial efficacy than the ligands.     

Synthesis and Surface‐Spectroscopic Characterization of Photoisomerizable glyco‐SAMs on Au(111)

Photoisomerizable glyco‐SAMs (self‐assembled monolayers), utilizing synthetic azobenzene glycoside derivatives were fabricated. The ultimate goal of this project is to assay the influence of the 3D arrangement of sugar ligands on cell adhesion, and eventually make cell adhesion photoswitchable. However, it is a prerequisite for any biological study on the spatial conditions of carbohydrate recognition, that photoisomerization of the surface molecules can be verified. Here, we employed IRRAS and XPS to spectroscopically characterize glyco‐SAMs. In particular and unprecedented to date, we prove reversible E→Z→E isomerization of azobenzene glycoside‐terminated SAMs.     

Electronic structure and structural stability of LaAl2 and LaAl3—A comparative study

The large structural stability regime of LaAl₂ and LaAl₃ as a function of pressure is investigated by the band structure calculations using the FP-LAPW method. An earlier experimental study has revealed that there is no structural phase transition at ∼35 and ∼30 GPa for LaAl₂ and LaAl₃, respectively. Our calculations indicate that in the density of states curve of LaAl₂, the Fermi level (E_F) lies in a slope between bonding maxima and antibonding minima. At high pressures the E_F moves slightly towards the valley, but this shifting does not affect its structural stability. In LaAl₃, the E_F falls in a flat region in the density of states and does not move even up to 33 GPa. The band dispersion curves for both the compounds show movement of bands under the influence of pressure. Some of them cross the Fermi level leading to so called Lifshitz transitions. However, it is seen that these electronic changes do not manifest into any volume anomaly in LaAl₃ under pressure. Our study clearly shows that the density of states behavior for LaAl₂ and LaAl₃ satisfies the Yamashita-Asano criterion for structural stability. The theoretical equations of state, bulk modulus and its pressure derivative values are compared with the experimental values.     

Adsorption of methylene blue onto jute fiber carbon: kinetics and equilibrium studies

Jute fiber obtained from the stem of a plant was used to prepare activated carbon using phosphoric acid. Feasibility of employing this jute fiber activated carbon (JFC) for the removal of Methylene blue (MB) from aqueous solution was investigated. The adsorption of MB on JFC has found to dependent on contact time, MB concentration and pH. Experimental result follows Langmuir isotherm model and the capacity was found to be 225.64 mg/g. The optimum pH for the MB removal was found to be 5-10. The kinetic data obtained at different concentrations have been analyzed using a pseudo-first-order, pseudo-second-order equation, intraparticle diffusion and Elovich equation. Among the kinetic models studied, the intraparticle diffusion was the best applicable model to describe the adsorption of MB onto JFC.     

Molecular dynamics simulations of pregelification mixtures for the production of imprinted xerogels

A series of molecular dynamics (MD) simulations of different pregelification mixtures representing intermediate stages of the sol-gel process were set up to gain insight into the molecular imprinting process in xerogels, namely, to assess the template-gel affinity and template self-aggregation. The physical plausibility of the parametrization was checked, confirming the reliability of the simulations. The simulated mixtures differed in the water/methanol ratio (1:3, 5:3, and 5:1) and in the absence/presence of an organic functional group (phenylaminopropyl-) in the silicate species. The simulation results, expressed mainly by the radial distribution functions and respective coordination numbers, showed that the affinity of the template molecule, damascenone (a hydrophobic species), for the gel backbone would not be attained without the tested functional group, phenylaminopropyl-. The affinity, related to the capability to trap the template within the gel network, was derived mostly from the hydrophobic interaction. It was also inferred from MD simulations that lower water contents (methanol-richer mixtures) would facilitate a better dispersion of both the functional group and the template within the final gel, therefore favoring the imprinting process. From the experimental counterparts of the simulated mixtures, a series of imprinted and nonimprinted xerogels were obtained. There was only one xerogel exhibiting the imprinting effect, namely, the one containing the organic group obtained at the lower water/methanol ratio (1:3), in agreement with predictions from the MD simulations. Such congruence demonstrates the ability of MD simulations to provide information regarding the fine aspects of molecular interactions in pregelification mixtures for imprinting.     

Thermo-mechanical measurement of elasto-plastic transitions during cyclic loading

The surface temperature of stainless steel SS304 low cycle fatigue specimens subjected to cyclic loading was studied using infrared thermography technique. The thermal data mapped onto the various stages of cyclic stress-strain curve shows the ability of these measurements to identify the yield points in both the compression and tension loading. Based on the results of this study, it is possible to identify the state of stress for materials such as elastic tension, plastic tension, elastic compression, plastic compression during cyclic loading using infrared thermographic data. The thermo-elastic slope and thermo-plastic slope was observed to be dependent on the prior loading cycles.     

Structural stability, phase transformations and band-tuning of actinide and rare earth based intermetallics under high pressure: a perspective

When a solid is subjected to external pressure, it can undergo either structural transformation or remain stable in its parent structure. The sequence of structural transformations, when mapped for similar materials, viz., isostructural, isoelectronic and so on, can be used to create a map showing the evolution of structures under pressure for such materials. Such maps are useful in predicting high pressure phases. The structural transitions and the stability of materials as a function of pressure are intricately connected to their electronic structure. Many a times it is advantageous to know the stability of the material under pressure just by calculating its electronic structure. This can be accomplished only if several homologues materials are studied and the stability criteria arrived at by correlating their electronic structure with their structural stability under pressure. Further, as a function of pressure, the electronic structure changes can lead to enhancement in certain desired electronic, physical or mechanical properties. Several examples are known, wherein, pressure tuning of the band structure leads to improved properties. In this paper, we have discussed the above mentioned areas and presented a perspective of the above using the results of our own studies on f-electron based intermetallics (f-IMCs).     

Anticorrosive property of Spiraea Cantoniensisis extract as an eco-friendly inhibitor on mild steel surface in acid medium

Abstract

The inhibitive performance of methanolic extract of eco-friendly green inhibitor Spiraea cantoniensis (S. cantoniensis) on inhibiting corrosion of mild steel (MS) in 1?M HCl was studied by weight loss, AC-impedance, Fourier transform infrared spectroscopy (FT-IR), Raman, x-ray diffraction (XRD), ultraviolet-visible (UV-Vis), atomic absorption spectroscopy (AAS), and scanning electron microscopy (SEM) analysis. The results showed that the corrosion rate significantly decreased in the presence of the S. cantoniensis inhibitor with a gradual increase in inhibition efficiency at an increased inhibitor concentration. The temperature studies were conducted which included activation energy (E_a), change in enthalpy (ΔH°_ads), change in entropy (ΔS°_ads), change in free energy (ΔG°_ads) and heat of adsorption (Q_ads). These calculations were helpful to determine the reaction mechanism and proved it as a physisorption type following the Langmuir adsorption isotherm. The analysis of the protective film using FT-IR, Raman, XRD, and SEM analysis clearly showed the potentiality of S. cantoniensis in blocking the MS surface to prevent corrosion by 1?M HCl. The solution analysis via AAS and UV-Vis showed the inhibitive effect of the inhibitor (S. cantoniensis) in both inhibitive and the uninhibitive solution exhibiting the adsorption of the phytochemical molecules on the MS surface.     

Ultra-sonication-assisted solvent extraction of quercetin glycosides from 'Idared' apple peels

Quercetin and quercetin glycosides are physiologically active flavonol molecules that have been attributed numerous health benefits. Recovery of such molecules from plant matrices depends on a variety of factors including polarity of the extraction solvent. Among the solvents of a wide range of dielectric constants, methanol recovered the most quercetin and its glycosides from dehydrated 'Idared' apple peels. When ultra-sonication was employed to facilitate the extraction, exposure of 15 min of ultrasound wavelengths of dehydrated apple peel powder in 80% to 100% (v/v) methanol in 1:50 (w:v) solid to solvent ratio provided the optimum extraction conditions for quercetin and its glycosides. Acidification of extraction solvent with 0.1% (v/v) or higher concentrations of HCl led to hydrolysis of naturally occurring quercetin glycosides into the aglycone as an extraction artifact.     

Chemical composition of the essential oil from basil (Ocimum basilicum Linn.) and its in vitro cytotoxicity against HeLa and HEp-2 human cancer cell lines and NIH 3T3 mouse embryonic fibroblasts

This study examines the chemical composition and in?vitro anticancer activity of the essential oil from Ocimum basilicum Linn. (Lamiaceae), cultivated in the Western Ghats of South India. The chemical compositions of basil fresh leaves were identified by GC-MS: 11 components were identified. The major constituents were found to be methyl cinnamate (70.1%), linalool (17.5%), β-elemene (2.6%) and camphor (1.52%). The results revealed that this plant may belong to the methyl cinnamate and linalool chemotype. A methyl thiazol tetrazolium assay was used for in?vitro cytotoxicity screening against the human cervical cancer cell line (HeLa), human laryngeal epithelial carcinoma cell line (HEp-2) and NIH 3T3 mouse embryonic fibroblasts. The IC(50) values obtained were 90.5 and 96.3?μg?mL(-1), respectively, and the results revealed that basil oil has potent cytotoxicity.