Two‐stage copolycondensation of preformed oligomers with bisphenols by tosyl chloride/dimethylformamide/pyridine from distributions of resulting oligomers determined by a combination of gel permeation chromatography and NMR

A two‐stage co‐oligomerization of the oligomers initially formed from an equimolar mixture of isophthalic acid (IPA) and terephthalic acid (TPA) and 2,2‐bis(4‐hydroxyphenyl)propane (BPA, 50 mol %) with bisphenols (BPs, 20 mol %) was carried out using a tosyl chloride/dimethylformamide/pyridine condensing agent. The distributions of the resulting oligomers (n_x‐mers), which were quenched with methanol, were determined by a combination of gel permeation chromatography (GPC) and NMR. These distributions (presented by molar percentage) were conveniently calculated with the equation n_x (mol %) = n_x (% mol by GPC) × n₀ (mol % by NMR)/n₀ (% mol by GPC), where n_x (% mol) = n_x (wt % by GPC)/its molecular weight. The results showed the distributions of the preformed IPA/TPA‐BPA oligomers to be in fairly good accord with those obtained directly from GPC and to be supported by the NMR results. The calculation was applied to the co‐oligomers prepared up to a reaction of 0.7, at which there was an increase in the number of higher oligomers indivisible by GPC and the distributions could no longer be determined by molar percentage. The calculated distributions are discussed in relation to the results of copolycondensation. The sequence distributions in the resulting co‐oligomers, which were also examined by NMR, are compared with those in the copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 44–51, 2004     

Fracture mechanism of liquid‐crystalline epoxy resin systems with different phase structures

A liquid‐crystalline epoxy resin was cured at two different temperatures. The phases of the cured systems clearly showed isotropic and nematic polydomain structures, which depended on the curing temperature. The fracture toughness of the systems was measured, and the fracture mechanism was investigated with polarized IR measurements. The nematic polydomain structure system showed considerably higher fracture toughness than the isotropic structure. Moreover, both systems exhibited a reorientation of the network chains near the fracture surface during the fracture process, and the region of the network reorientation in the nematic polydomain structure system was larger than that in the isotropic structure system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4044–4052, 2004     

Microwave-promoted Suzuki-Miyaura coupling reactions in a cycloalkane-based thermomorphic biphasic system

Microwave-promoted Suzuki-Miyaura coupling reaction of aryl halides attached to a cycloalkane-soluble platform was accomplished in a cycloalkane-based thermomorphic biphasic system. Following irradiation and subsequent cooling, the monophasic reaction mixture immediately formed a biphasic solution to allow facile workup and separation of the product.     

Influence of the network chain orientation on the fracture toughness of a mesogenic epoxy resin modified with CTBN

A biphenol‐type epoxy resin, which had a mesogenic group in the backbone moiety, was modified with carboxy‐terminated butadiene acrylonitrile copolymer (CTBN) as a reactive elastomer, and its fracture toughness was measured. With the addition of CTBN, the fracture toughness of the biphenol‐type epoxy resin significantly increased and became significantly higher than that of a bisphenol A‐type epoxy resin modified with CTBN. The network chain orientation in the cured biphenol‐type epoxy resin system was clearly observed during the fracture process with polarized microscopy Fourier transform infrared measurements, although such a phenomenon was not observed in the bisphenol A‐type epoxy resin system. The high toughness of the cured biphenol‐type system was clearly due to the consumption of the mechanical energy by a large deformation of the matrix resin due to the orientation of the network chains during the fracture process. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1198–1209, 2003     

Thermal properties and fracture toughness of a liquid‐crystalline epoxy resin cured with an aromatic diamine crosslinker having a mesogenic group

A mesogenic‐type curing agent was synthesized to introduce a mesogenic group not only into epoxy resin backbones but also into the crosslink units. In the mesogenic curing agent system, the domain size became larger, and the network arrangement in each domain existed to a greater extent than that in a system cured with the ordinary diamine curing system according to the evidence from polarized optical micrographs and polarized Fourier transform infrared mapping measurements. Moreover, the fracture toughness of the system was considerably improved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2486–2494, 2006     

Volumetric study on the inclusion complex formation of α- and β-cyclodextrin with 1-alkanols at different temperatures

The partial molar volumes (V_a) of 1-alkanols (carbon number, m=5, 6, 7) in - and -cyclodextrin (CD) solutions at 5.00 mmol kg^–1 have been determined as a function of alkanol concentration (C_a) between 293.2 and 308.2 K by using a dilatometer. It has been observed that with an increase in C_a, V_a increased in -CD solution but decreased in -CD solution, asymptotically to a value of V_a in CD-free water. The dependence of V_a on C_a provided the binding constant (K) of 1:1 complex, the volume change in complex formation, and the partial molar volume of complex itself. The complex formation mechanism has been discussed on the basis of these values and their carbon number dependences in the respect of geometric behavior, hydrophobic interaction, and van der Waals interaction. It is concluded that the CD cavity in water is not rigid but flexible for fitting in nicely with guest molecule.     

Analysis of scintigrams using fuzzy theory

Textural features for phantom images were extracted. Texture parameters which represent RI distribution--skew, energy, entropy and angular second moment were used. But, it was difficult to analyse the images using discriminant analysis for textural features, because textural features had statistical noise. Therefore fuzzy reasoning was adapted to analyse the images. Textural features for six kinds of images were showed using membership function. The possibility to the image was evaluated using the value of membership function on each images. Fuzzy reasoning could be done easily using max-min composition formula. The reasoning was found more suitable to analyse the images than discriminant analysis and will be considered useful for analysis of clinical scintigrams.     

Seven-membered vibsane-type diterpenes with a 5,10-cis relationship from Viburnum awabuki

New five seven-membered vibsane-type diterpenes named 5-epi-vibsanin C, 5-epi-vibsanin H, 5-epi-vibsanin K, 18-O-methyl-5-epi-vibsanin K and 5-epi-vibsanin E have been isolated from the leaves of Viburnum awabuki (Caplifoliaceae). Their structures have been elucidated by analyses of spectroscopic data and comparison of their spectral data with those of the previously known seven-membered vibsane-type diterpenes. The occurrence of these seven-membered vibsane-type diterpenes with a cis relationship on the C-5 and C-10 positions in nature have been predicted by conformational analysis of vibsanin B, an eleven-membered vibsane-type diterpene. Vibsanin C, 5-epi-vibsanin C and 5-epi-vibsanin H exhibited moderate cytotoxic activities on KB cells.     

Technical study for SPECT of the head using slant hole collimator

The performance of a 160 keV slant hole collimator (160 keV SH) was compared with that of a 140 keV high resolution collimator (140 keV HR) for SPECT imaging of the head using 99mTc. The minimum radius of revolution was reduced from about 23 cm to 13 cm using 160 keV SH. Relative sensitivity of the 160 keV SH was 108% of that of the 140 keV HR. Compared with SPECT using 140 keV HR, 160 keV SH SPECT yielded approximately a 15% increase in resolution. The 160 keV SH SPECT images of phantom were superior in resolution and contrast to that of 140 keV HR SPECT. We concluded that high quality SPECT images of the head can be obtained from rotating gamma cameras equipped with slant hole collimators.