Low temperature synthesis and characterization of porous anatase TiO2 nanoparticles

An ethanol solution of Ti-peroxy compounds was prepared from the ethanol solution of titanium isopropoxide (Ti(O-iPr)4) and H2O2. Heating of the ethanol solution of the Ti-peroxy compounds at 348 K formed a Ti-peroxy gel, and heat treatment of the gel at 348 K for more than 6 h formed gels that consisted of anatase nanoparticles. The diameter of the anatase nanoparticles increased from 9 to 15 nm as the heating time increased from 6 to 48 h. According to the results of the N2 adsorption measurement, the anatase nanoparticles had micropores, and the specific surface area (SBET) was in the range of 254 to 438 m2/g. The particle size, lattice strain, specific surface area, and photocatalytic activity of the anatase nanoparticles can be regulated by the heating time of the Ti-peroxy gel at 348 K.     

Reinvestigation of the synthesis of isoliquiritigenin: application of Horner-Wadsworth-Emmons reaction and Claisen-Schmidt condensation

Isoliquiritigenin [ILG, (E)-1] was readily prepared via the Horner-Wadsworth-Emmons reactions using β-ketophosphonates 5a, b. An improved protocol for the synthesis of (E)-1 via the Claisen-Schmidt condensation was also presented.     

Low-temperature synthesis of niobium oxide nanoparticles from peroxo niobic acid sol

A peroxo niobic acid sol was prepared by peptization of the niobic acid precipitate (Nb2O5.nH2O) with a H2O2 aqueous solution. Crystallized Nb2O5 nanoparticles and niobic acid nanoparticles were obtained by heating the peroxo niobic acid sol. When peroxo niobic acid sol prepared by peptization of the niobic acid precipitate ([NH3]=0.3 mol/l) was heated at 348 K for 1 week, Nb2O5 nanoparticles with a diameter of 4.5 nm and a S(BET) of 275 m2/g were obtained. When peroxo niobic acid sol prepared by peptization of the niobic acid precipitate ([NH3]=1 mol/l) was heated at 348 K for 1 week, niobic acid nanoparticles with a diameter of less than 2 nm were obtained. The pore structure and degree of crystallinity of the nanoparticles prepared by heating the peroxo niobic acid sol greatly depended on the concentration of the ammonia solution used for preparing the niobic acid precipitate.     

Inhibitory effects of some natural products on the activation of hyaluronidase and their anti-allergic actions.

The anti-allergic drugs disodium cromoglycate (DSCG) and tranilast are strong inhibitors of hyaluronidase. In the development of new anti-allergic drugs, we studied the inhibitory effects of some natural products on the activation of hyaluronidase. Among the compounds tested, liquiritigenin, isoliquiritigenin and baicalein showed dose-related inhibitory effects. Anti-allergic activities of these compounds were evident from the facts that they inhibited the histamine release from rat peritoneal exudate cells induced by antigen, compound 48/80 and calcium ionophore A-23187, and from their inhibitory effect on Shultz-Dale reaction using sensitized guinea pig ileum.     

Enantioselective photooxidation of a sulfide by a chiral ruthenium(II) complex immobilized on a montmorillonite clay surface: the role of weak interactions in asymmetric induction

The present work pursued a possibility that enantioselectivity was achieved through weak intermolecular interactions between a catalyst and a substrate. For that purpose, we studied the photooxidation of alpha-ethylbenzyl phenyl sulfide catalyzed by a polypyridyl ruthenium(II) complex as a chiral photosensitizer. No covalent bonding was formed between a catalyst and a substrate, because the complexes used ([Ru(phen)(3)](2+) or [Ru(bpy(3))(2+)]) were coordinatively saturated. Enantiomer excess (ee) was attained to be 30% when a chiral photosensitizer was immobilized on montmorillonite clay. It was even improved to 43% in the presence of an additional chiral auxiliary, dibenzoyl-D(+)-tartaric acid. Notably, no enantioselectivity was achieved when the reaction took place in homogeneous solutions. The ab initio calculations were performed on the stability of an associate composed of a catalyst (metal complex) and a product (sulfoxide) to obtain a clue to reaction mechanisms. The calculations suggest that chiral discrimination is achieved even through noncovalent interactions between a substrate and a chiral sensitizer when the attacking direction by a substrate toward a catalyst is limited sterically on a solid surface.     

A new method for disintegration studies of rapid disintegrating tablet

The aim of this study was to develop a simple and suitable disintegration method specific for rapid disintegrating tablets (RDTs). The new disintegration method that we propose employs a rotary shaft to exert mechanical pressure on the RDT. To assess our method, we manufactured several placebo RDTs and exposed them to severe storage conditions (60 degrees C/75%RH for 1 week) in order to obtain RDTs with a wide range of disintegration times. These placebo RDTs were utilized to compare the disintegration times obtained by several methods, including the proposed method. As expected, the disintegration time of the placebo RDTs in human sensory test varied widely. The disintegration times determined by the conventional disintegration test were in good correlation to those in human sensory test, but the slope was far from 1 (0.241). There was no correlation between the disintegration time of RDTs in human sensory test and those determined by the conventional dissolution test. In contrast, we acquired good correlation between the disintegration times obtained with the new method and those in human sensory test, and the slope was very close to 1 (0.858). We attribute this to the use of mechanical stress in the new method, similar to that the RDT is subject to in the oral cavity. We therefore concluded that the proposed method was suitable for the measurement of the disintegration time of RDTs. This new method might provide a valuable approach for the establishment of the official disintegration test for RDTs in the future.     

Major element analysis of selected rock and volcanic ash samples in the Unzen area,Japan, by X-ray fluorescence spectroscopy

Determination of major elements in natural solid samples by X-ray fluorescence spectroscopy (XRF) with a fusion disc technique is described. Data obtained by the present XRF analytical system were found to have satisfactorily high reliability. Five rock samples and a volcanic ash sample with varying ages ranging from the present to 180 000 years, derived by the current and past volcanic activities in the Unzen area, Nagasaki, Japan were analyzed for their major elements' compositions using the above mentioned system. The chemical composition of the magma under this area has changed very little at least over the last 180 000 years.     

Characterization of oxides obtained by heating a mixture of peroxoniobic acid and peroxotitanic acid

Nb-doped TiO(2) particles were prepared by heating a mixture of peroxotitanic acid and peroxoniobic acid in air. When the heating temperature was more than 1173 K, the dominant phase obtained was rutile TiO(2), along with a small amount of TiNb(2)O(7). The relationship between the lattice parameters of the obtained rutile TiO(2) depended on the molar fraction of Nb/(Ti + Nb). In the case where peroxo compounds were used as a precursor, a change in the lattice parameters of the rutile TiO(2) was observed within the lower X(Nb) range, as compared to the alkoxide method. The results indicate that a homogeneous dispersion of doped Nb(5+) ions in the obtained rutile TiO(2) lattice was achieved by using peroxo compounds. Furthermore, the oxide particles obtained by using peroxo compounds had a lower activation energy of the carrier electrons (E(a)) and oxygen vacancies, even though the heating procedure was carried out in air. The UV-vis absorption spectra and Raman spectra of the obtained oxide particles indicated that the dominant reaction of the decomposition of O(2)(2-) ions in the TiO(2) lattice was O(2)(2-)→ O(2) + 2e(-) as a reducing agent.