Solubility of methane in octane + ethanol at temperatures from 303.15 K to 333.15 K and pressures up to 12.01 MPa

Solubility of methane in octane + ethanol was measured at temperatures ranging from 303.15 K to 333.15 K and pressures ranging from 2.60 MPa to 12.01 MPa. Experimental data were analyzed using the Soave-Redlich-Kwong equation of state with three types of mixing rules, and the estimated average deviation from the experimental solubility data was less than 3.5 %.     

First total synthesis of isoquinolinone alkaloid marinamide and its methyl ester

The first total synthesis of isoquinolinone alkaloid marinamide 1 and its methyl ester 2 was described. The key steps involved a regioselective Frieclel-Crafts reaction of 1-benzyl-1H-pyrrole to form the intermediate 8.     

HBF4溶液中全铅液流电池

报道了一种HBF₄水溶液中的全铅液流电池,正、负电极电解液均采用Pb（BF₄）₂的HBF₄水溶液.在酸性的四氟硼酸铅电解液中考察了石墨电极和玻碳电极作为工作电极的循环伏安性能,石墨电极较适于用作全铅液流电池的正、负电极.采用石墨电极作为电池的正、负电极并在四氟硼酸铅酸性电解液中进行充放电实验,其中Pb（BF₄）₂浓度分别为0.5、1.0和1.5 mol·L^-1,且保持游离的HBF₄浓度为1.0 mol·L^-1.该电池为单液流电池,不需要隔膜分隔正、负极的电解液,电流密度为10、20和40 mA.cm^-2,当限定充电容量为7.0 mAh.cm^-2,放电电压截止到1.0 V时,平均库仑效率大于87%,平均能量效率大于68%;当电解液采用1.0或1.5 mol·L^-1 Pb（BF₄）₂+1.0 mol·L^-1HBF₄水溶液时,在10及20 mA.cm^-2电流下的能量效率最高可超过74%.     

电场和应力作用下氮钝化扶手型氧化锌纳米带的电子结构和磁特性

采用密度泛函理论(DFT)方法,在LDA+U水平下详细研究了电场和应力作用下氮钝化扶手型氧化锌纳米带(NA8-ZnONRs)的电子结构和磁特性。对体系的电子结构和磁性进行详细的计算,结果表明：本征扶手型氧化锌纳米带(A8-ZnONRs)是无磁性P型半导体。氮钝化后NA8-ZnONRs具有铁磁金属性,其磁性主要来源于N2p轨道(2.56μ_B)和O2p轨道(0.69μ_B)电子的自旋极化,总磁矩为3.21μ_B。NA8-ZnONRs体系对X方向电场有较强的响应,通过调节X方向电场的幅度,可以有效调节体系的磁矩。在X方向电场作用下体系仍具有铁磁金属性,磁性也主要来源于N2p和O2p轨道电子的自旋极化。施加X方向应力作用后,体系仍表现为铁磁金属性。与NA8-ZnONRs纳米带磁矩相比,体系的总磁矩均发生了较大幅度的增长,表明体系对应力作用具有较明显的相应。但随着应力幅度的调节,总磁矩的变化较平坦。表明施加应力可以有效调节体系的磁矩,但在较小应力范围内,体系对应力变化的相应不明显。     

基于双核模型对超重元素合成机制的研究

在双核模型基础上，考虑了熔合与准裂变的竞争，通过数值法求解主方程，计算了⁵⁰Ti，⁵⁸Fe+²⁰⁸Pb，²⁰⁹Bi这4个反应系统通过冷熔合反应合成超重元素的激发函数，得到了与实验比较符合的结果.计算了不同入射能量时各角动量分波对熔合概率和超重核存活概率的影响以及对蒸发剩余截面的贡献.这些结果对进一步理解超重核的合成机制有重要意义. 关键词： 超重元素 双核模型 熔合反应 蒸发剩余截面     

热熔合反应合成超重核产生截面的同位素依赖性

通过在形成超重核的重离子俘获和熔合过程中引入位垒分布函数的方法对双核模型做了进一步发展. 超重核形成过程中的俘获、熔合和蒸发3个阶段分别采用了半经验的耦合道模型、数值求解主方程和统计蒸发模型的方法来描述. 计算了近年来Dubna小组利用热熔合反应⁴⁸Ca(²⁴³Am, 3n—5n)^288—286115和⁴⁸Ca(²⁴⁸Cm, 3n—5n)^293—291116合成超重新核素的蒸发余核激发函数. 系统分析了⁴⁸Ca轰击锕系元素U,Np,Pu,Am,Cm合成超重核Z=112—116产生截面的同位素依赖性. 给出了合成超重新核素最佳的弹靶组合和入射能量, 即有最大的超重核产生截面. 计算说明, 壳修正能和中子分离能是影响超重核生成截面产生同位素依赖性的主要因素.     

Nuclear Potential and Fusion Cross Sections for Synthesizing Super-Heavy Elements in Di-nuclear Systems

A double foMing method with simplified Skyrme-type nucleon nucleon interaction is used to calculate the nuclear interaction potential between two nuclei. The calculation is performed in tip-to-tip orientation of the two nuclei if they are deformed. Based on this method, the potential energy surfaces~ the fusion probabilities and the evaporation residue cross sections for some cold fusion reactions leading to super-heavy elements within di-nuclear system model are evaluated. It is indicated that after the improvement, the exponential decreasing systematics of the fusion probability with increasing charge number of projectile on the Pb based target become better and the evaporation residue cross sections are in better agreement with the experimental data.     

Possible Way to Synthesize Superheavy Element Z=117

Within the framework of the dinuclear system model, the production of superheavy element Z = 117 in possible projectile-target combinations is analysed systematically. The calculated results show that the production cross sections are strongly dependent on the reaction systems. Optimal combinations, corresponding excitation energies and evaporation channels are proposed, such as the isotopes^248.249 Bk in ^48 Ca induced reactions in 3n evaporation channels and the reactions ^45Sc＋246.248Cm in 3n and 4n channels, and the system ^51 V＋ 244pu in 3n channel.     

可调谐激光二极管吸收光谱系统信号分析及谱线畸变校正技术研究

利用可调谐激光二极管吸收光谱技术进行气体检测时,波长调制伴随的光强幅度调制,会使解调出的谐波谱线发生畸变.在傅里叶分析的基础上对可调谐激光二极管吸收光谱任意调制幅度的波长调制光谱信号进行了分析,给出了光强幅度调制引起吸收谱线畸变的理论解释.提出了在波长调制过程中进行旧步平抑幅度调制的方法来消除谱线畸变,设计了实验方案并...