Mechanism of 1,6-addition reactions of organocuprates: detailed NMR spectroscopic study of a cuprate-enyne pi complex

A detailed NMR-spectroscopic study of the multiply 13C-labeled cuprate pi complexes 2, 2a and 2b was carried out. The 13C,13C coupling constants observed were interpreted in terms of a deformation of the cuprate-alkene complex from the expected idealized square plane. This conclusion is in agreement with NOESY and ROESY data acquired with unlabeled material.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20–30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.     

Total synthesis of 1-(Z)-atractylodinol

The total synthesis of 1-(Z)-atractylodinol, a natural polyacetylenic alcohol with several biological activities, has been achieved using a newly developed telluride synthon and a novel use for the Negishi type coupling reaction employing vinyl tellurides.     

The kinetics of oxidative coupling of 2,6-dimethylphenol with a copper-diamine catalyst system

Reaction rate measurements show that a Michaelis-Menten model proposed earlier is inadequate to describe the full course of the polymerization of 2,6-dimethylphenol to poly(2,6-dimethyl-1,4-phenylene oxide). Modification of this model to include the effects of catalyst deactivation during the reaction and difference in reactivity between the monomer and other oligomers resulted in much greater accuracy. The kinetic constants in the modified model were influenced by reaction temperature, system composition, and method of catalyst component addition.     

Standard enthalpy of solution and formation of cesium chromate. Derived thermodynamic properties of the aqueous chromate,bichromate, and dichromate ions,alkali metal and alkaline earth chromates,and lead chromate

Calorimetric measurements of the enthalpy of solution of cesium chromate gave ΔH_soln = (7622 ± 24) cal_th mol^?1 for a dilution of Cs₂CrO₄·21128H₂O. This result, along with the enthalpy of dilution gave the standard enthalpy of solution, ΔH_soln^o = (7512 ± 31) cal_th mol^?1, whence the standard enthalpy of formation, ΔH_f⁰(Cs₂CrO₄, c, 298.15 K), was calculated to be ?(341.78 ± 0.46) kcal_th mol^?1. Recomputed thermodynamic data for the formation of the other alkali metal chromates have been tabulated. From their solubilities and enthalpies of solution, the standard entropies, S⁰(298 K), of BaCrO₄ and PbCrO₄ were estimated to be (38.9 ± 0.9) and (43.7 ± 1.2) cal_th K^?1 mol^?1, respectively. There is evidence that ΔH_f⁰(SrCrO₄, c, 298.15 K) may be in error. Thermochemical, solubility, and equilibrium data, have been combined to update the thermodynamic properties of the aqueous chromate (CrO₄^2?), bichromate (HCrO₄^?), and dichromate (Cr₂O₇^2?) ions. The new values at 298.15 K are as follows:

     

7.

Characterization of Sol-gel bioencapsulates for ester hydrolysis and synthesis     

Cleide M. F. Soares  Heizir F. de Castro  Juliana E. Itako  Flavio F. De Moraes  Gisella M. Zanin 《Applied biochemistry and biotechnology》2005,123(1-3):845-859

Candida rugosa lipase was entrapped in silica sol-gel particles prepared by hydrolysis of methyltrimethoxysilane and assayed by p-nitrophenyl palmitate hydrolysis, as a function of pH and temperature, giving pH optima of 7.8 (free enzyme) and 5.0–8.0 (immobilized enzyme). The optimum temperature for the immobilized enzyme (50–55°C) was 19°C higher than for the free enzyme. Thermal, operational, and storage stability were determined with n-butanol and bytyric acid, giving at 45°C a half-life 2.7 times greater for the immobilized enzyme; storage time was 21 d at room temperature. For ester synthesis, the optimum temperature was 47°C, and high esterification conversions were obtained under repeated batch cycles (half-life of 138 h).     

8.

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates     

Juliana R. Steter  José O.S. PontólioM.I.C.F. Costa  J.R. Romero 《Polyhedron》2007

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.     

9.

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase     

Juliana Vaz Bevilaqua  Lidia M. Lima  Aline Gomes Cunha  Eliezer J. Barreiro  Tito L. M. Alves  Lucia Moreira Campos Paiva  Denise M.Guimarães Freire 《Applied biochemistry and biotechnology》2005,121(1-3):117-128

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

10.

Metal ion scrambling in hexanuclear M(6)(Et(2)NCO(2))(12) complexes (M = Co,Mg). Synthesis,solid state structure,and solution dynamics of heteronuclear Co(n)Mg(6-n)(Et(2)NCO(2))(12) complexes     

Caudle MT  Benedict JB  Mobley CK  Straessler NA  Groy TL 《Inorganic chemistry》2002,41(12):3183-3190

Heteronuclear diethylcarbamato complexes of the form Co(n)()Mg(6)(-)(n)()(Et(2)NCO(2))(12) were prepared from the isostructural homonuclear precursors Mg(6)(Et(2)NCO(2))(12), 1, and Co(6)(Et(2)NCO(2))(12), 2, via a solvothermal methodology. Two materials were selected for single-crystal X-ray diffraction analysis: Co(1.6)Mg(4.4)(Et(2)NCO(2))(12) and Co(2.7)Mg(3.3)(Et(2)NCO(2))(12). Both compounds crystallize in the orthorhombic space group Ccca, as do 1 and 2. The molecular structure is best described as two trinuclear M(3) units cross-linked by diethylcarbamate ligands and twisted about one another, so that the complex has overall D(2) symmetry and is chiral. Each trinuclear unit consists of two terminal pentacoordinate metal ions and one central hexacoordinate metal ion. The X-ray diffraction data were unambiguous that the Co(2+) ions migrate exclusively to the pentacoordinate sites in the heteronuclear complexes, thus demonstrating that metal ion scrambling at the molecular level must occur. The composition of individual crystals can be continuously varied for Co(2+) mole fractions chi(Co) < 0.5, and the a and c unit cell distances are linearly related to chi(Co). This indicates that the compounds behave as solid solutions. There appears to be either a chemical or crystallographic phenomenon inherent in the synthetic methodology that prevents isolation of heteronuclear materials having chi(Co) > 0.5. Solution electronic spectroscopy and molecular weight measurements show that 2 can dissociate in chloroform and cyclohexane solution to give a dimeric complex 2'. This behavior contrasts with the stability of 1 in solution, as shown by NMR. The kinetic rate profile for formation of Co(n)Mg(6-n)(Et(2)NCO(2))(12) reveals saturation kinetics and is consistent with direct attack by 2' on 1 to give the heteronuclear complex via a higher nuclearity intermediate. This study illustrates a general method for the preparation of solids based on heteronuclear Werner-type complexes of the M(6)(Et(2)NCO(2))(12) structure type, and the mechanism by which such compounds can be formed from isostructural homonuclear precursors.     

1 [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] 下一页 » 末  页»

	$\text{S}{}^0\text{/}\text{cal}{}_{\mathrm{th}}\text{K}{}^{\mathrm{?1}}\text{mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{f}}{}^0\text{/kcal}{}_{\mathrm{th}}\text{mol}{}^{\mathrm{?1}}$	$\text{ΔG}{}_{\mathrm{f}}{}^0\text{/kcal}{}_{\mathrm{th}}\text{mol}{}^{\mathrm{?1}}$
CrO42?(aq)	(13.8 ± 0.5)	?(210.93 ± 0.45)	?(174.8 ± 0.5)
HCrO4?(aq)	(46.6 ± 1.8)	?(210.0 ± 0.7)	?(183.7 ± 0.5)
Cr2O72?(aq)	(67.4 ± 3.9)	?(356.5 ± 1.5)	?(312.8 ± 1.0)

Characterization of Sol-gel bioencapsulates for ester hydrolysis and synthesis

Candida rugosa lipase was entrapped in silica sol-gel particles prepared by hydrolysis of methyltrimethoxysilane and assayed by p-nitrophenyl palmitate hydrolysis, as a function of pH and temperature, giving pH optima of 7.8 (free enzyme) and 5.0–8.0 (immobilized enzyme). The optimum temperature for the immobilized enzyme (50–55°C) was 19°C higher than for the free enzyme. Thermal, operational, and storage stability were determined with n-butanol and bytyric acid, giving at 45°C a half-life 2.7 times greater for the immobilized enzyme; storage time was 21 d at room temperature. For ester synthesis, the optimum temperature was 47°C, and high esterification conversions were obtained under repeated batch cycles (half-life of 138 h).     

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Metal ion scrambling in hexanuclear M(6)(Et(2)NCO(2))(12) complexes (M = Co,Mg). Synthesis,solid state structure,and solution dynamics of heteronuclear Co(n)Mg(6-n)(Et(2)NCO(2))(12) complexes

Heteronuclear diethylcarbamato complexes of the form Co(n)()Mg(6)(-)(n)()(Et(2)NCO(2))(12) were prepared from the isostructural homonuclear precursors Mg(6)(Et(2)NCO(2))(12), 1, and Co(6)(Et(2)NCO(2))(12), 2, via a solvothermal methodology. Two materials were selected for single-crystal X-ray diffraction analysis: Co(1.6)Mg(4.4)(Et(2)NCO(2))(12) and Co(2.7)Mg(3.3)(Et(2)NCO(2))(12). Both compounds crystallize in the orthorhombic space group Ccca, as do 1 and 2. The molecular structure is best described as two trinuclear M(3) units cross-linked by diethylcarbamate ligands and twisted about one another, so that the complex has overall D(2) symmetry and is chiral. Each trinuclear unit consists of two terminal pentacoordinate metal ions and one central hexacoordinate metal ion. The X-ray diffraction data were unambiguous that the Co(2+) ions migrate exclusively to the pentacoordinate sites in the heteronuclear complexes, thus demonstrating that metal ion scrambling at the molecular level must occur. The composition of individual crystals can be continuously varied for Co(2+) mole fractions chi(Co) < 0.5, and the a and c unit cell distances are linearly related to chi(Co). This indicates that the compounds behave as solid solutions. There appears to be either a chemical or crystallographic phenomenon inherent in the synthetic methodology that prevents isolation of heteronuclear materials having chi(Co) > 0.5. Solution electronic spectroscopy and molecular weight measurements show that 2 can dissociate in chloroform and cyclohexane solution to give a dimeric complex 2'. This behavior contrasts with the stability of 1 in solution, as shown by NMR. The kinetic rate profile for formation of Co(n)Mg(6-n)(Et(2)NCO(2))(12) reveals saturation kinetics and is consistent with direct attack by 2' on 1 to give the heteronuclear complex via a higher nuclearity intermediate. This study illustrates a general method for the preparation of solids based on heteronuclear Werner-type complexes of the M(6)(Et(2)NCO(2))(12) structure type, and the mechanism by which such compounds can be formed from isostructural homonuclear precursors.