Quantification of antimony depth profiles in Sb-doped tin dioxide thin films

Sb-doped SnO(2) thin films, deposited by atomic layer epitaxy (ALE) for gas sensor applications, have been characterized by secondary ion mass spectrometry (SIMS). Quantification of the depth profile data has been carried out by preparing a series of ion implanted standards. Average concentrations determined by SIMS have been compared with Sb/Sn ratios obtained by X-ray fluorescence (XRF) spectrometry and proton induced X-ray emission (PIXE) spectrometry and have been found to be in good agreement. However, a detection limit of 5x10(18) at cm(-3) could only be obtained because of mass interferences. SIMS data show that the ALE technique can be used to produce a controllable growth and doping of thin films.     

Determination of lead concentration and film thickness in electroluminescent calcium sulfide thin films by X-ray fluorescence

Summary For the analysis of electroluminescent thin films, X-ray fluorescence (XRF) provides a convenient method as both the concentration of the dopant and the film thickness can be determined rapidly and non-destructively. An XRF method for the determination of thickness and lead concentration in lead doped calcium sulfide thin films was developed. Calibration standards made of polyvinyl alcohol and gelatin as well as filter paper standards were used. In addition, the applicability of a fundamental parameter program UniQuant was investigated. For comparison, the concentrations of lead and calcium were determined after dissolution by atomic absorption spectrometry. Generally, the correlation between the different methods excluding the use of filter paper standards was satisfactory. When the dopant concentration was very low or very high, however, the fundamental parameter program yielded best results. Determination of thicknesses by XRF was made by comparing the sulfur K intensities of the sample and those of a zinc sulfide standard. A correction factor for molar masses and densities was applied. The thicknesses obtained were compared to those measured with a profilometer after etching and the deviations were found to be less than 10%.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Calculation of binary magnetic properties and potential energy curve in xenon dimer: second virial coefficient of (129)Xe nuclear shielding

Quantum chemical calculations of the nuclear shielding tensor, the nuclear quadrupole coupling tensor, and the spin-rotation tensor are reported for the Xe dimer using ab initio quantum chemical methods. The binary chemical shift delta, the anisotropy of the shielding tensor Delta sigma, the nuclear quadrupole coupling tensor component along the internuclear axis chi( parallel ), and the spin-rotation constant C( perpendicular ) are presented as a function of internuclear distance. The basis set superposition error is approximately corrected for by using the counterpoise correction (CP) method. Electron correlation effects are systematically studied via the Hartree-Fock, complete active space self-consistent field, second-order M?ller-Plesset many-body perturbation, and coupled-cluster singles and doubles (CCSD) theories, the last one without and with noniterative triples, at the nonrelativistic all-electron level. We also report a high-quality theoretical interatomic potential for the Xe dimer, gained using the relativistic effective potential/core polarization potential scheme. These calculations used valence basis set of cc-pVQZ quality supplemented with a set of midbond functions. The second virial coefficient of Xe nuclear shielding, which is probably the experimentally best-characterized intermolecular interaction effect in nuclear magnetic resonance spectroscopy, is computed as a function of temperature, and compared to experiment and earlier theoretical results. The best results for the second virial coefficient, obtained using the CCSD(CP) binary chemical shift curve and either our best theoretical potential or the empirical potentials from the literature, are in good agreement with experiment. Zero-point vibrational corrections of delta, Delta sigma, chi (parallel), and C (perpendicular) in the nu=0, J=0 rovibrational ground state of the xenon dimer are also reported.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

On-line separation of Pu(III) and Am(III) using extraction and ion chromatography

An on-line method developed for separating plutonium and americium was developed. The method is based on the use of HPLC pump with three analytical chromatographic columns. Plutonium is reduced throughout the procedure to trivalent oxidation state, and is recovered in the various separation steps together with americium. Light lanthanides and trivalent actinides are separated with TEVA resin in thiocyanate/formic acid media. Trivalent plutonium and americium are pre-concentrated in a TCC-II cation-exchange column, after which the separation is performed in CS5A ion chromatography column by using two different eluents. Pu(III) is eluted with a dipicolinic acid eluent, and Am(III) with oxalic acid eluent. Radiochemical and chemical purity of the eluted plutonium and americium fractions were ensured with alpha-spectrometry.     

Effects of various washing procedures on the chromium content of human scalp hair

The effects of four wash procedures on the concentration of chromium in a pooled sample of human scalp hair are compared. The wash solutions examined are Triton X-100, sodium lauryl sulphate, acetone, and a mixture (1 + 1) of hexane and ethanol. The plateaux reached for hair chromium concentration are functions of the number of washings, and are characteristic for each wash solution. The wash procedure recommended involves two 20-min washes with aqueous 1% sodium lauryl sulphate solution after a hexane rinse.     

The vane method and kinetic modeling: shear rheology of nanofibrillated cellulose suspensions

We conduct rheological characterization of nanofibrillated cellulose (NFC) suspensions, a highly non-Newtonian complex fluid, at several concentrations. Special care is taken to cope with the prevalent problems of time scale issues, wall depletion and confinement effects. We do this by combining the wide-gap vane geometry, extremely long measurement times, and modeling. We take into account the wide-gap related stress heterogeneity by extending upon mainstream methods and apply a gap correction. Furthermore, we rationalize the experimental data through a simple viscous structural model. With these tools we find that, owing to the small size of the particles subjected to Brownian motion, the NFC suspensions exhibit a critical shear rate, where the flow curve experiences a turning point. This makes the steady state of these suspensions at low shear rates non-unique. To optimize various mixing and pumping applications, such history dependent tendency of NFC suspensions to shear band needs to be taken into account.     

On applicability of PCA,voxel-wise variance normalization and dimensionality assumptions for sliding temporal window sICA in resting-state fMRI

Subject-level resting-state fMRI (RS-fMRI) spatial independent component analysis (sICA) may provide new ways to analyze the data when performed in the sliding time window. However, whether principal component analysis (PCA) and voxel-wise variance normalization (VN) are applicable pre-processing procedures in the sliding-window context, as they are for regular sICA, has not been addressed so far. Also model order selection requires further studies concerning sliding-window sICA. In this paper we have addressed these concerns. First, we compared PCA-retained subspaces concerning overlapping parts of consecutive temporal windows to answer whether in-window PCA and VN can confound comparisons between sICA analyses in consecutive windows. Second, we compared the PCA subspaces between windowed and full data to assess expected comparability between windowed and full-data sICA results. Third, temporal evolution of dimensionality estimates in RS-fMRI data sets was monitored to identify potential challenges in model order selection in a sliding-window sICA context. Our results illustrate that in-window VN can be safely used, in-window PCA is applicable with most window widths and that comparisons between windowed and full data should not be performed from a subspace similarity point of view. In addition, our studies on dimensionality estimates demonstrated that there are sustained, periodic and very case-specific changes in signal-to-noise ratio within RS-fMRI data sets. Consequently, dimensionality estimation is needed for well-founded model order determination in the sliding-window case. The observed periodic changes correspond to a frequency band of ≤ 0.1 Hz, which is commonly associated with brain activity in RS-fMRI and become on average most pronounced at window widths of 80 and 60 time points (144 and 108 s, respectively). Wider windows provided only slightly better comparability between consecutive windows, and 60 time point or shorter windows also provided the best comparability with full-data results. Further studies are needed to determine the cause for dimensionality variations.     

Nanofibrillated cellulose/carboxymethyl cellulose composite with improved wet strength

In this paper, nanofibrillated cellulose/carboxymethyl cellulose (CMC) composite films were prepared using tape casting. The obtained transparent films showed shear induced partial alignment of fibrils along the casting direction, resulting in birefringence in cross polarized light. The carboxyl groups of CMC could be further utilized to create ionic crosslinking by treatment with glycidyl trimethyl ammonium chloride (GTMA). The GTMA treated composite films had improved mechanical properties both in wet and dry state. The chemical composition and morphologies of composites were analyzed with X-ray photoelectron spectroscopy, elemental analysis, scanning electron microscopy and wide-angle X-ray scattering.