Magnetic and magneto-optical properties of CoFeCrSiB amorphous ribbons

In this paper we investigate the surface magnetic properties of as-quenched (AQ) CoFeCrBSi ribbons prepared by planar flow casting method with using magneto-optic Kerr effect (MOKE). Measured hysteresis loops in longitudinal and transversal configurations enable us to obtain the information of ribbons surface magnetic properties. Moreover, we suggest new magneto-optic method, which is based on measurements of magneto-optical effects depending on DC current flowing through the ribbon. Experimental data of AQ ribbons are then compared with the model, which describes the influence of incidence angle on magneto-optical angles.     

Pressure effects on the quadrupole coupling constant of 7Li in first stage lithium graphite

The pressure dependence of the experimental ⁷Li NMR spectra is reported for first stage lithium graphite (LiC₆) intercalation compound at temperatures T = 232 and 293 K. This experiment together with the presented point charge model calculation of the ⁷Li quadrupole coupling constant $\text{(}\text{e}{}^2\text{qQ}\text{h}\text{)}$ allows an unambiguous determination of the sign of e²qQ/h which is negative: $\text{e}{}^2\text{qQ}\text{h=-52 kHz}$ at p = 1 bar and T = 232 K. The averaged location of the electrons transferred from the Li intercalant to the graphite layers, as estimated in this study, is in excellent agreement with earlier theoretical energy-band calculations. The compressibility of LiC₆ in the c-direction is predicted to be k_c = 1.7 × 10^-12cm²dyn^-1, it agrees with estimates derived from the available phonon dispersion relations.     

Artinian level modules and cancellable sequences

In order to use dualization to study Hilbert functions of artinian level algebras we extend the notion of level sequences and cancellable sequences, introduced by Geramita and Lorenzini, to include Hilbert functions of certain artinian modules. As in the case of algebras a level sequence is cancellable, but now by dualization its reverse is also cancellable which gives a new condition on level sequences. We also give a characterization of the cancellable sequences involving Macaulay representations.     

On a certain two-sided symmetric condition in magnetic field analysis and computations

A special two-sided condition for the incremental magnetic reluctivity is introduced which guarantees the unique existence of both the weak and the approximate solutions of the nonlinear stationary magnetic field distributed on a region composed of different media, as well as a certain estimate of the error between the two solutions. The condition, being discussed from the physical as well as the mathematical point of view, can be easily verified and is fulfilled for various magnetic reluctivity models used in electrotechnical practice.     

Three-pencil lattices on triangulations

In this paper, three-pencil lattices on triangulations are studied. The explicit representation of a lattice, based upon barycentric coordinates, enables us to construct lattice points in a simple and numerically stable way. Further, this representation carries over to triangulations in a natural way. The construction is based upon group action of S ₃ on triangle vertices, and it is shown that the number of degrees of freedom is equal to the number of vertices of the triangulation.      

Hypernuclear production with a strong spin-flip

A kinematically correct treatment of the full transition amplitude for many-body hypernuclear production is presented. By an example of (⁺, K⁺) reaction, effects of the spin-flip amplitude and its interference with the spin-non-flip amplitude are demonstrated and specified for ¹² C.Dedicated to Academician Václav Votruba on the occasion of his eightieth birthday.The discussions with many colleagues are appreciated, in particular those with R. Mach, L. Majling and T. Motoba were of much use.     

Interpretation of toroidal current and loop voltage temporal evolution during RF-current drive experiment on the T-7 tokamak

A simple analytical model is developed and solved to describe time evolution of the loop voltage and toroidal current when RF and inductive current drive take place simultaneously. A relation for the real value of the RF driven current has been obtained under these conditions. Comparison with experimental data from T-7 tokamak allows to estimate the role of the skin effect during RF current drive.The authors would like to thank A. Ya. Kislov for the basic data on the T-7 tokamak transformer. They are also indebted to V. V. Parail and G.V. Pereverzev for many clarifying discussions.     

One-step electrochemical synthesis of pure poly(2,5-dicyano-p-phenylenevinylene) films

In this communication we describe the electrochemical synthesis of poly(2,5-dicyano-p-phenylenevinylene) (DCNPPV) polymer films on indium tin oxide substrates. We investigate the purity, morphology, absorption and emission properties of the film. The purity was checked by infrared spectroscopy. The film formed presented spectroscopic purity equivalent to the chemically prepared PPV that was dialyzed for one week. Scanning electron microscopy of the surface revealed a grain-like morphology. The absorption and emission spectra showed absorption and emission bands at 420 nm and 575 nm, respectively, with the absorption onset at 422 nm, which corresponds to an energy gap of 2.25 eV. The electrochemical determination of the energy gap gives 2.05 eV, thus quite close to the optical energy gap at the onset of absorption. The EA and IP were determined by electrochemical measurements and are 3.46 eV and 5.51 eV, respectively.

Detection of trace amounts of Ni by laser-induced fluorescence in graphite furnace with intensified charge coupled device

A laser-induced fluorescence in graphite furnace (LIF-GF) set-up has been equipped with an intensified CCD detector (ICCD) that enables simultaneous multichannel detection of large wavelength regions. The main advantages of such a system in comparison with conventional photomultiplier detection are: simultaneous detection of several fluorescence wavelengths for easy characterization of excitation and fluorescence spectra and for an increase of the absolute sensitivity and spectral selectivity; simultaneous monitoring of background signals, such as those due to matrix interferences, blackbody radiation and scattered laser light; decrease of the susceptibility to radio-frequency pick-ups emitted from the pump laser due to the delayed read-out procedure; time-resolved studies of fluorescence spectra for improved elemental selectivity or for studies of atomization processes, and a possibility to perform two-dimensional imaging of height distributions of atomization and, in combination with an imaging spectrometer, diffusion processes in the furnace. The first work on LIF-GF with ICCD detection has been performed on Ni. The most sensitive and versatile excitation and detection wavelengths have been identified. Detection limits in water solutions by the LIF-GF technique have been improved by two orders of magnitude and are found to be 0.015 pg with ICCD and 0.01 pg using a photomultiplier at the most sensitive excitation and detection wavelengths. Nickel in concentrations has been detected in aqueous standard reference samples with sodium concentrations ranging from to % (riverine water and estuarine water) with good accuracy and precision. The Ni contents of standard riverine and estuarine water were determined to 1.00 ± 0.11 and 0.75 ± 0.07 ng/ml, respectively. The certified concentrations are 1.03 ± 0.10 and 0.743 ± 0.078 .     

Estimation scheme for level-dependent uncertainty of analytical result: application for determination of 1-hydroxypyrene in urine

The estimation scheme of uncertainty of determination of 1-hydroxypyrene (1-OHP) in urine was developed analysing the main stages of the analytical procedure: (1) preparation of 1-OHP standards, (2) creation of the calibration curve for the high performance liquid chromatography (HPLC) analysis method with the evaluation of recovery, (3) measuring procedure of aliquot of urine, (4) adjusting the pH of aliquot and hydrolysis with enzyme, (5) solid phase extraction, (6) concentration of the extract, (7) injection of the extract to chromatograph and analysing by the HPLC method, (8) calculation of 1-OHP mass from the calibration curve, (9) calculation of 1-OHP concentration in urine. The evaluation of the uncertainty is based on quantification of individual components. Combined uncertainty was calculated using the law of propagation of uncertainties according to the EURACHEM/CITAC guidelines. Level dependence of the uncertainty arises from the calibration curve. The limits of detection and quantification were found to be equal to 0.03 and 0.1 ng/mL, respectively. The calculated expanded level-dependent uncertainty covers 47–27–25% within the concentration range 0.03–0.1–0.4 ng/mL with the materials and equipment used. These parameters could easily be recalculated according to the proposed scheme if there are some changes in the analysis procedure.