New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation of Siloxane Loading

Several new random and block copoly(imide siloxane)s have been prepared by the solution polycondensation of commercially available 4,4′-oxydianiline (ODA) and amino-propyl terminated polydimethylsiloxane (APPS) with 4,4′-(hexafluoro-isopropylidene)diphthalic anhydride (6FDA). The siloxane loading was kept to 10, 20, 30, 40 and 50 wt% in the copolymers. The random copolymers were prepared by a one pot solution imidization technique, and two pot solution imidization technique was adopted for the synthesis of the block copolymers. The diamine ODA and the dianhydride 6FDA composed the hard block segment, while APPS and 6FDA composed the soft block segment. The hard block length was kept constant while the soft block lengths were varied by varying the siloxane loading. Accordingly, block copoly(imide siloxane)s were prepared on increasing the soft block lengths (DP) from 3 to 6, 10, 18 and 36 for fixed hard block length of 22. The resulting polymers have been well characterized by IR, NMR and GPC techniques. Thermal and mechanical properties of the random and block copolymers were compared with the already reported homopolyimide without siloxane moiety.     

Improvement in the light conversion efficiency of silicon solar cell by spin coating of CuO,ZnO nanoparticles and CuO/ZnO mixed metal nanocomposite material

Synthesis of pure Zinc oxide (ZnO), Copper oxide (CuO) nanoparticles (NPs) and their (ZnO/CuO) nanocomposites (NCs) in 1:1 M ratio were successfully prepared by co-precipitation method. The structural properties of the as synthesized nanoparticles and nanocomposite materials were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. Optical band-gap studies were done using UV–Visible absorption spectroscopy. Photovoltaic properties of pure ZnO NPs, CuO NPs and ZnO/CuO NCs coated over a single-crystalline silicon solar cell were carried out to compare improvement of light-conversion efficiency in coated solar cell. The maximum light conversion efficiencies were found to be of 8.02% for CuO (3 mg/ml concentration) and 7.28% for ZnO NPs (3 mg/ml concentration), whereas that of mixed metal nanocomposite CuO/ZnO NCs was found to be 7.62%. at very low concentration of 1 mg/ml. This indicates with low concentration of mixed metal NCs an improvement in light efficiency can be obtained. The enhancement in efficiency could be due to formation of p - n heterojunction by CuO/ZnO NCs composites which enhances the number of electrons and holes participating in conduction on the surface.     

Scalar curvature of a Levi-Civita connection on the Cuntz algebra with three generators

Letters in Mathematical Physics - A differential calculus on the Cuntz algebra with three generators coming from the action of rotation group in three dimensions is introduced. The differential...     

Control of de-excitation to selected vibrational levels in the ground state of NaH molecule using two broadband ultrashort pulses

We show that the de-excitation to different vibrational levels of the ground state in NaH molecule can be controlled by using two delayed ultrashort pulses (4 fs Gaussian). A vibrational wave packet generated on the excited A¹Σ⁺ state by the first pulse is de-excited back to the ground state by a second pulse after a time delay. The cross-section for de-excitation of the wave packet to different vibrational levels of the ground electronic state can be controlled by controlling the delay time between the two pulses as well as by choosing a pulse duration much shorter than the vibrational period of the molecule, such that the de-excited wave packet remains localized in the Franck–Condon region of a particular vibrational level of the ground state. Hence, the de-excitation to a particular vibrational level can be enhanced by suppressing that in others. In spite of the large bandwidth of the pulse which includes nine vibrational levels of the upper state and five vibrational levels of the ground state, one can selectively de-excite the molecule to any one or two vibrational levels of the ground state by carefully choosing the delay time between the pulses and the pulse duration. We are designing the wave packet in the ground state by two short pulses and selectively distributing the population in one or two levels at various values of the delay time. In light molecules having small vibrational period, this selectivity in de-excitation to one or two vibrational levels in the ground state can be achieved only by using ultrashort (4 fs) pulses in the presence of which the localization of the wave packet in the Franck–Condon region of the vibrational levels are particularly possible. It has been shown that the de-excitation cross-section to a particular vibrational level oscillates with delay between the pulses which can be realized as a time-dependent quantum gate.     

Use of allylzinc halide as a source of halide: Differential addition of nucleophiles to Ts-aziridines and aldehydes under similar reaction conditions

We have observed that the allylic zinc halide under identical reaction conditions acts in different modes for different electrophiles. For Ts-aziridines the halide part of the allylic halide has been introduced as a nucleophile and for the carbonyl compounds the simple allylation reaction occurs. To the best of our knowledge this is the first report where the allylic zinc halide is the source of halide acting as nucleophile. The main advantages of the present procedure are easy to handle, no need of inert atmosphere, mild reaction conditions, and applicability to a wide variety of substrates for aziridines and carbonyl compounds.     

Structure–property co‐relationship of fluorinated poly(imide‐siloxane)s

Eight poly(imide‐siloxane)s co‐polymers have been prepared by one pot solution imidization method. The polymers are synthesized by the reaction of bisphenol‐A‐dianhydride (BPADA) with fluorinated diamine 4,4′‐bis(3″‐trifluoromethyl‐p‐aminobiphenyl ether) biphenyl, and aminopropyl‐terminated polydimethylsiloxane (APPS). The polymers are synthesized by varying the siloxane loading to 5, 10, 15, 20, 25, 30, 35, and 40 wt%, respectively. Thermal, mechanical, rheological, and dielectric properties of these polymers have been evaluated with respect to siloxane loading. The polymers showed glass transition temperature of 107–203°C and tensile strength at break of 24–75 MPa depending on siloxane loading. The elongation break of the polymers ranges from 24 to 144% depending on siloxane loading. The amounts of char residue in the polymers have been correlated with incorporated siloxane in the polymer by NMR techniques. The polymers showed very low water absorption and dielectric constant as low as 2.43 when the siloxane loading is 40 wt%. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis,Characterization and Comparison of Properties of Novel Fluorinated Polyimides Derived from Bisphenol–A‐di(phthaleic anhydride)

Four new poly(etherimide)s have been synthesized by reaction with commercially available bisphenol‐A‐(diphthaleic anhydride) (BPADA) with four different kinds of diamines, namely 4,4′‐bis(p‐aminophenoxy‐3,3″‐trifluoromethyl) terphenyl,4,4′‐bis(3″‐trifluoromethyl‐p‐aminobiphenyl ether)biphenyl,2,6‐bis(3′‐trifluoromethyl‐p‐aminobiphenyl ether)pyridine, 2,5‐bis(3′‐trifluoromethyl‐p‐aminobiphenylether)thiopene. The poly(etherimide)s are named as 1a, 1b, 1c and 1d, respectively. The synthesized polyimides show good solubility in various organic solvents. The polyimide films had low water absorption of 0.19–0.30% and low dielectric constant of 2.79–3.1 at 1 MHz. These polyimides showed very high thermal stability with decomposition temperature (5% wt loss) up to 522°C in nitrogen. Transparent thin films of these polyimides exhibited tensile strength up to 97 MPa, a modulus of elasticity up to 1.56 GPa and elongation at break up to 20%.     

Bidirectional Controlled Teleportation by Using 5-Qubit States: A Generalized View

Recently bidirectional controlled perfect teleportation using 5-qubit states are reported in Int. J. Theor. Phys. (2013), doi:10.1007/s10773-013-1484-8 and ibid (2012), doi:10.1007/s10773-012-1208-5. In this paper we have shown that there exists a class of 5-qubit quantum states that can be used for bidirectional controlled teleportation. Two out of the three reported cases are the special cases of the proposed class of 5-qubit quantum states and one of them is not strictly a case of controlled bidirectional quantum teleportation. Further, we have shown that one can in principle, construct infinitely many 5-qubit quantum states for this purpose. We have also shown that the idea can be extended to bidirectional controlled probabilistic teleportation. Some potential applications of the proposed scheme and its modified versions are also discussed in relation with the implementation of quantum remote control and quantum cryptography.     

Facile green synthesis of gold nanoparticles using leaf extract of antidiabetic potent Cassia auriculata

A simple biological method for the synthesis of gold nanoparticles (AuNPs) using Cassia auriculata aqueous leaf extract has been carried out in the present study. The reduction of auric chloride led to the formation of AuNPs within 10 min at room temperature (28°C), suggesting a higher reaction rate than chemical methods involved in the synthesis. The size, shape and elemental analysis were carried out using X-ray diffraction, TEM, SEM-EDAX, FT-IR and visible absorption spectroscopy. Stable, triangular and spherical crystalline AuNPs with well-defined dimensions of average size of 15-25 nm were synthesized using C. auriculata. Effect of pH was also studied to check the stability of AuNPs. The main aim of the investigation is to synthesize AuNPs using antidiabetic potent medicinal plant. The stabilizing and reducing molecules of nanoparticles may promote anti-hyperglycemic if tested further.