Preparation and characterization of silver/TiO2 composite hollow spheres

Silver-coated poly(methyl acrylic acid) (PSA) core-shell colloid particles were prepared by an in situ chemical reduction method. Crystalline silver/titania composite hollow spheres were obtained by coating the as-prepared PSA/silver particles with an amorphous titania layer and subsequently calcining in Ar atmosphere. SEM and TEM investigation indicated that the size of the as-prepared PSA/silver and PSA/silver/TiO(2) core-shell particles and silver/titania composite hollow particles was fairly uniform and the wall thickness of the hollow spheres was in the range of 40-80 nm. UV-vis absorption spectra were recorded to investigate their optical properties.     

Visible light induced photocatalytic reaction of rhodamine B dye via 12-tungstosilicic acid in water

Using 12-tungstosilicic acid (SiW124-) as the catalyst, rhodamine B (RhB) dye in an aerated aqueous solution can undergo an effective photocatalytic stepwise N-deethylation process under visible light irradiation, and dioxygen is reduced to hydrogen peroxide by the reducedSiW12 4-. This provides the potential for moving polyoxometalate-based photocatalytic processes from the near-UV into the visible region of the spectrum.     

高效液相色谱-串联质谱法测定小鼠组织中的新型抗心力衰竭化合物AF-HF001

建立了基于高效液相色谱-质谱联用技术的新型抗心力衰竭化合物AF-HF001在小鼠组织中的测定方法,并考察了其在小鼠体内的组织分布。采用液-液萃取对样品进行预处理,以Thermo Hypersil Gold C18色谱柱进行分离,流动相为乙腈-0.1%甲酸水溶液,梯度洗脱,采用选择性反应监测(SRM)正离子模式检测分析物。小鼠组织中AF-HF001含量在0.5~10μg/mL范围内线性关系良好(r>0.996),在加标量为1.5,4,10μg/mL的组织样品中,提取回收率大于58%,基质效应在100.38%~109.99%之间,日内和日间精密度RSD均小于15%。该方法为AF-HF001的体内分布研究及进一步药物研发提供了依据。初步结果表明,该化合物能够迅速到达心脏并迅速代谢,主要分布在肝脏组织中,其他组织中分布较少。     

Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

A Bernstein Type Theorem for Entire Willmore Graphs

We show that every two-dimensional entire graphical solution of the Willmore equation with square integrable second fundamental form is a plane.     

Strong covalent bonding modulated graphene oxide/epoxy interfacial enhancement and advanced corrosion resistance

Abstract

Chemically functionalized graphene oxide [multi-amino functionalized graphene oxide (MAGO)] was achieved by building covalent bonds between graphene oxide (GO) and a small molecule containing benzene structure and multi-amino groups. Fourier transform infrared, X-ray diffraction, X-ray photo electron spectroscopy and TEM-EDX results certified that the molecule was successfully grafted onto GO nanosheets. Subsequently, functionalized GO was incorporated into waterborne epoxy (EP) coating through ball-milling method. This molecular design can significantly improve the dispersion of MAGO in EP matrix, as well as the compatibility and interaction between MAGO and EP. Compared with GO/EP, the water absorption of MAGO/EP decreased from 4.38 to 2.59%, the adhesion strength of MAGO/EP increased from 4.72 to 6.32?MPa after immersion of 40?days in 3.5% NaCl solution. Incorporation of 1?wt% of MAGO into EP matrix prominently improved the long-term corrosion resistance. The impedance modulus of GO/EP coating decreased by four orders after 40 days immersion, while that of MAGO/EP coating only decreased by one order. The impedance modulus was still 1.47?×?10⁸ Ω cm², and two-time constant wasn’t detected for MAGO/EP coating. This research developed a novel green anticorrosion coating with enhanced durability for metal protection.     

Facile electrochemical synthesis of a conducting copolymer from 5-aminoindole and EDOT and its use as Pt catalyst support for formic acid electrooxidation

5-Aminoindole and 3,4-ethylenedioxythiophene (EDOT) were copolymerized electrochemically on a carbon cloth (CC) electrode in an aqueous sulfuric acid solution. The as-prepared copolymer was characterized by cyclic voltammogram, SEM, and UV-vis and FT-IR spectra through which the electrochemical properties, structure, and composition of the as-obtained copolymer were determined. The electrochemical activity and stability of the as-formed copolymer are significantly improved in comparison with poly(5-aminoindole) due to the incorporation of EDOT units into the conjugated chain. The copolymer film-modified CC electrode was used as substrate for Pt particle deposition (denoted as Pt/copolymer/CC), and then, its catalytic activity towards formic acid electrooxidation was studied. Experimental results indicate that the catalytic activity of Pt/copolymer/CC towards formic acid electrooxidation is enhanced in comparison with that of Pt/homopolymer/CC, which can be attributed to the homogeneous distribution of Pt nanoparticles on the copolymer/CC substrate and the improved electrochemical activity of the copolymer film.     

One‐Pot Synthesis of CdSe Quantum Dots in Aqueous Solution for Biological Labeling

The one‐pot synthesis of water‐soluble and biologically compatible yellow CdSe quantum dots (QDs) featuring the use of glutathione (GSH) as the capping and reducing agent was achieved under aqueous conditions at 150 °C. The synthesized yellow CdSe QDs with quantum yield (QY) up to 20% exhibit zinc blende cubic structure particles with an average diameter of 4‐5 nm. It was found that both molar ratio of Se/Cd and reaction time had a significant effect on size distribution of GSH‐CdSe QDs. Meanwhile, the interaction of QDs bioconjugated to bovine hemoglobin (BHb) was studied by absorption and fluorescence(FL) spectra. With addition of BHb, the FL intensity of CdSe QDs largely quenched due to the static mechanism. The linear range is 5.0 × 10^?8 mol/L to 3.0 × 10^?6 mol/L, and the correlation coefficient is 0.9991, suggesting that could be used as a probe to label biological molecules and bacterial cells.