Mn掺杂后三元黄铜矿结构半导体CuInTe2的缺陷特征与热电性能

三元黄铜矿结构(也称类金刚石结构)半导体是一类具有热电转换潜力的新型热电材料. 本次工作中采用电负性更小的Mn元素替换CuInTe₂黄铜矿结构半导体中的Cu元素, 设计制备贫Cu化合物Cu_1-xInMn_xTe₂. 研究表明, 当Mn含量较低时, Mn优先占位在In 位置产生受主缺陷Mn_In^-. 因此随着Mn含量的增大, 载流子浓度和电导率均得到改善. 但当Mn含量进一步增大后, Mn可同时占位在In位置和Cu位置, 除产生受主缺陷Mn_In^-外, 还能产生施主缺陷Mn_Cu⁺. 由于两类极性相反的缺陷之间的湮灭现象, 使得缺陷浓度及载流子浓度开始降低, 晶格结构畸变有变小趋势, 因此在高温下晶格热导率仅略有提高. 研究结果表明, 在某一特定的Mn含量(x=0.05)时, 材料具有最优的热电性能(ZT=0.84@810.0 K), 这一性能约是未掺杂CuInTe₂的2倍.     

WC/纳米碳管复合材料制备及其电化学性能

碳化钨具有类铂催化性能和较强的抗中毒能力, 但其催化活性远低于铂等贵金属催化剂. 如何提高其催化活性是碳化钨应用研究所面临的主要难点与热点之一. 为寻找改善碳化钨催化性能的技术方法, 本文将表面修饰与原位还原碳化技术相结合, 成功制备了碳化钨/纳米碳管复合材料, 采用XRD, HRTEM等手段对其形貌和晶相组成进行了表征, 并应用粉末微电极对其电催化性能进行了评价. 实验结果表明, 样品由碳化钨颗粒和纳米碳管组成, 碳化钨为形态不规则纳米颗粒, 均匀地生长于纳米碳管的外表面; 在碱性溶液中, 复合材料对对硝基苯酚的电催化性能明显强于具有介孔结构的纯碳化钨样品. 这说明将碳化钨复合到纳米碳管的外表面是提高碳化钨电催化活性的有效技术方法之一.     

球钯材料填充柱中氢-氘交换的计算机模拟

本文结合球体颗粒交换模型(SPEM)与气-固表面交换模型设计了氢-氘交换反应模型, 采用FORTRAN语言进行计算机编程模拟, 研究了钯材料粒径、分离柱长度、填料密度、气体流速和温度等因素对氢氘交换反应的影响。结果表明:通过降低气体流速, 增大金属材料目数、填料密度、交换柱长, 以及升高温度, 可以提高交换速率;而在满足一维速率方程的条件下, 柱径的大小不影响交换反应过程。     

Liquid Nuclear Magnetic Resonance Implementation of Quantum Computation in Subspace

Based on the logical labelling method, we prepare an effective pure state in a subsystem of a three spin system via liquid nuclear magnetic resonance technique. Then with this subspace effective pure state we implement the Deutsch-Jozsa algorithm. The tomography for the subspace effective pure state and the corresponding spectrum of the output for the Deutsch-Jozsa algorithm agree with theoretical predictions, which shows that we have successfully implemented the Deutsch-Jozsa algorithm in a subsystem of a nuclear spin system and demonstrated a subspace quantum computation.     

非等电子Sb替换Cu和Te后黄铜矿结构半导体Cu_3Ga_5Te_9的热电性能

热电材料是一类能够实现热与电相互转换的功能材料,在制冷和发电领域极具应用潜力.本文采用金属Sb元素非等电子替换Cu3Ga5Te9化学式中的Cu和Te,观察到材料Seebeck系数和电导率提升的现象.这些电学性能的改善与载流子浓度和有效质量的增大及迁移率基本维持不变有关.载流子浓度的提高是由于Sb原子占位在Te晶格位置后费米能级进入到价带所产生的空穴掺杂效应所致,同时也与Cu含量减少后铜空位(V-1Cu)浓度增大相关联.另外,非等电子替换后,阴离子(Te2-)移位导致了晶格结构缺陷参数u和η的改变,其改变量fiu和fiη与材料晶格热导率(κL)的变化密切相关.在766 K时,适量的Sb替换量使材料的最大热电优值(ZT)达到0.6,比Cu3Ga5Te9提高了近25%.因此,通过选择替换元素、被替换元素及替换量有效地调控了材料的电学及热学性能,在黄铜矿结构半导体中实现了非等电子元素替换改善热电性能的思想.     

两台独立飞秒钛宝石振荡器的高精度主动同步研究

对两台独立钛宝石飞秒振荡器的高精度主动同步进行了研究.实验中共采用三套锁相环对它们输出的激光脉冲进行了主动同步控制，最终得到了时间抖动低于30fs的同步精度；由于通过计算机智能监控两台振荡器的相对腔长变动，使得高精度同步维持的时间高达40min.     

激光二极管抽运氦气冷却钕玻璃叠片激光放大器热致波前畸变和应力双折射的数值模拟和实验研究

热效应仍是限制激光放大器向高功率、高光束质量进一步发展的瓶颈问题, 高效的热管理是抑制热效应的重要技术途径. 研究了基于激光二极管抽运氦气冷却的钕玻璃叠片激光放大器的热效应. 利用有限元数值模拟的方法, 分析了钕玻璃的温度、应力应变和应力双折射分布, 并计算了热致波前畸变和退偏损耗, 与实验结果符合得较好, 在热沉积为0.7 W/cm³的条件下, 6片钕玻璃总的热致波前畸变为6.77λ , 最大退偏量大于90%.     

Error Tolerance in Constructing Cluster States

We consider the problem often encountered in constructing large cluster states, that is, the σx measurements in the depolarizing noise, and present a regulation to calculate the error propagation and the accumulation. Rohde et al. first pointed out the question [Phys. Rev. A 75 （2007） 010302（R）]. A quantitative analysis is given on the disadvantage influence of the probabilistic gate and noisy environment on the construction of two-dimensional （213） scalable cluster states. Positivity of partial transpose criteria is used to predict whether the final state is distillable or not. A critical value on the error tolerance in constructing cluster states is determined, which could be used as a test-bed for successful construction of scalable 2D cluster states. Furthermore, our quantitative analysis would also be helpful to find optimal approach to suppress the noise accumulation.     

Synthesis,structures and magnetic properties of four 3D heterometallic cobalt(II)–barium(II) coordination polymers

Four heterometallic complexes, namely {[CoBa(2,5-pdc)₂(H₂O)₃]_n·2nH₂O} (1), [CoBa(2,5-pdc)₂(H₂O)₄]_n (2), [CoBa(2,5-pdc)₂(H₂O)₅]_n (3) and [CoBa₂(2,5-pdc)₃(μ₂-H₂O)₂(H₂O)₄]_n (4) (2,5-H₂pdc?=?pyridine-2,5-dicarboxylic acid), have been hydrothermally synthesized and characterized both structurally and magnetically. All four complexes exhibit 3D frameworks, in which the Co(II) centers are chelated by pyridine nitrogen and carboxyl oxygen atoms in a five-membered ring. The Ba(II) centers are chelated and bridged by carboxyl oxygen atoms to extend the structures into 3D frameworks. The networks of the complexes can be controlled via rationally choosing the appropriate ligand and tuning the ratio of the two types of metal centers. The magnetic properties of complexes 1, 2 and 4 have been investigated from 2 to 300 K.     

Secondary amine-catalyzed [3 + 3] benzannulation to access polysubstituted benzenes through iminium activation

An organocatalytic [3?+?3] benzannulation to access polysubstituted benzenes from readily available α,β-unsaturated aldehydes and 1,3-bis(phenylsulfonyl)propene or 4-sulfonylcrotonates is described. The key reaction step is considered to be the iminium activation of enals by a secondary aminocatalyst. This organocatalytic protocol avoids the traditional strategy which is always with the aid of a transition-metal or a stoichiometric amount of strong base, and allows the synthesis of trisubstituted benzenes in high to excellent yields (74–96%).