红外小目标与背景辐射对比度的研究

红外目标与背景的对比度特征是红外探测系统检测的重要特征。研究了目标和背景在探测器上的辐射照度,提出了一种红外小目标与背景的辐射对比度,分析了该目标与背景对比度的相关因素。     

罗氏沼虾幼苗体内一种极小病毒的序列测定与分析

从患罗氏沼虾幼苗肌肉白浊病的幼虾体内分离到两种病毒颗粒,诺达病毒(MrNV)和直径只有15nm的小病毒颗粒(extrasmallvirus,XSV),本文通过建立病毒cDNA文库获得XSV基因组的部分序列,在此基础上合成探针,用从病虾组织中提取的总PNA进行Northern杂交,结果表明XSV基因组至少包括两条RNA片段.利用不同的方法对XSV的两端序列进行克隆和测定,分别得到了872、831和662bp3个相互重叠的序列片段,这3个序列的阅读框编码一个相同的大小在17×103左右的蛋白.     

重金属Pb2+对玉米苗生长的影响

以水栽培的玉米幼苗为材料，用不同浓度的醋酸铅溶液处理后，分别在第10天、第20天、第30天对玉米苗的根、茎、叶分别进行Pb^2＋含量测定。分析结果：Pb^2＋在玉米体内的分布表现为根〉叶〉茎；玉米中的叶绿素含量均降低；随着Pb^2＋浓度的增大，玉米细胞的膜透性表现根〉叶〉茎依次升高；Pb^2＋对玉米的伤害率的大小表现为根〉叶〉茎。该实验为进一步研究农作物对重金属Pb^2＋的耐性和重金属Pb^2＋在农作物体内的分布提供了可参考的数据。     

中极性高交联大孔吸附树脂的合成及其对绞股蓝皂甙的吸附性能

 二乙烯苯分别与甲基丙烯酸甲酯、丙烯酸甲酯、顺丁烯二酸二甲酯、乙酸烯丙酯、丙烯腈、甲基乙烯基甲酮和N-乙烯基吡咯烷酮进行悬浮共聚合,制备了一系列交联度为40％的大孔吸附树脂。并表征了这些树脂的结构,测定了树脂对绞股蓝皂甙的吸附量。结果说明,所用单体的极性等因素对树脂的孔结构及吸附量有重要影响。     

Preparation, Characterization and Catalytic Properties of S2O8^2-／ZrO2 Supported by Tungsten Carbide

A WC-supported S2O8^2-/ZrO2(PSZ) catalyst was prepared and characterized by means of XRD, BET, FTIR and XPS. The isomerization of n-pentane over the catalyst was investigated as well. The results show that the skeletal isomerization and the crack of n-pentane proceed simultaneously on WC-supported S2O8^2-/ZrO2 catalyst. The addition of tungsten carbide showed a significant enhancement in the activity and stability of the catalyst for n-pentane isomerization. The catalyst showed evidently a better activity than S2O8^2-/ZrO2 supported by Pt and WO3. The results can be interpreted by the existence of the tungsten oxycarbide compound(WCxOy) with carbidic, oxide and acidic sites.     

聚苯乙烯，聚甲基丙烯酸甲酯对聚氯乙烯／氯化聚乙烯共混体流变性的影响

PVC/CPE blend modified by rigid particles has good combined properties. In this paper, the effeCts of rigid particles (PMMA. PS. CaCO,) on the rheological behavior of PVC/ CPE systems were studied. The results showed that the apparent viscosity (aha) were decreased, extrusion surface smooth and Newtonian fluidity were slightly improved by filling a little amount of rigid ploymers (PS. PMMA) to PVC/CPE blends. The fluid activition energy (E,). Newtonian fluidity. extrusion surface smooth and ba of PVC/CPE blends were increased by filling CaCO₃ and die swelling ratio was decreased.The newtonian fluidity. En and ηa of PVC/CPE/CaCO₃ blends can be decreased by filling rigid polymers,and good extrusion surface smooth and low die swelling ratio unchanged.     

A real-time AFM study on crystal nucleation and growth in nanodroplets of isotactic polypropylene

Isotactic polypropylene (iPP) nanodroplets were prepared by using the classical droplet method in this study. The formation of nanodroplets allowed the controlled observation of polymer nucleation as well as access to crystal growth at exceptionally high supercooling in iPP. Three cases including the heterogeneous nucleation and fast crystallization in iPP droplets, the formation of multiple independent homogeneous nuclei within a single droplet and a single nucleus within a single droplet were detected by using atomic force microscopy (AFM) during gradually cooling after remelting the nanodroplets. Moreover, it is found that when the volume of droplet is larger than the value of ca. 130000 nm3, the first case was observed. Otherwise, the latter two cases appeared. The temperature at which the onset of nucleation was observed in individual droplets was found to be mainly dependent on height of the droplets when the size scale of the droplet is comparable to the size of the critical nucleus in at least one dimension, which indicates the nucleation behavior under confinement.     

成核剂及其完善剂对聚乳酸结晶行为的影响

通过POM、DSC以及流变测试系统考察了成核剂(PPZn)及其完善剂(E61)对PLA结晶形貌及其结晶能力的影响.POM结果表明PPZn和E61对PLA的结晶形态的影响随两者含量的变化而变化.加入低含量的PPZn可诱导PLA得到一定完善程度的球晶,而较高含量的PPZn能够诱导PLA基体得到针状晶体.通过添加少量E61可使在PPZn较高含量下的PLA针状晶体转变为球晶.但更高含量E61的添加却使PPZn的成核作用受到抑制,再次生成针状晶体,且E61含量越高,抑制作用越明显.DSC和流变测试进一步证明PPZn可显著提高PLA的结晶能力、有效地缩短基体结晶时间,而E61的添加对PLA的结晶速率影响不大.     

乙烯齐聚制α-烯烃反应体系的热力学研究

利用Benson基团贡献法计算了乙烯齐聚制α-烯烃反应各物质的标准摩尔生成焓、标准摩尔熵和摩尔定压热容,在298～700 K温度范围内对乙烯齐聚制α-烯烃反应体系的反应热、吉布斯自由能以及反应平衡常数进行了详尽的计算,分析了不同反应步骤的热力学平衡与限度,对不同反应发生的热力学可能性与顺序进行了判断,考察了反应温度和压力对乙烯齐聚制α-烯烃反应化学平衡的影响,确定了乙烯齐聚制α-烯烃反应体系适宜的工艺条件.结果表明:乙烯齐聚制α-烯烃反应为放热反应;从热力学上看,温度低于546 K时,乙烯齐聚生成直链α-烯烃反应为自发过程,且比α-烯烃异构化和烯烃歧化反应更容易进行;低温、高压有利于乙烯齐聚制α-烯烃反应的进行;乙烯齐聚制α-烯烃反应体系适宜的工艺条件为温度323～473 K,压力5～20 MPa,且在SHOP法的工艺条件下(温度363 K,压力10.3 MPa),乙烯齐聚生成直链α-烯烃反应的热力学平衡转化率接近于100%.     

几何画板模拟阿贝折射仪测折射率

几何画板模拟阿贝折射仪测量液体折射率的过程,相对传统教学手段,更加科学直观并动态演示。通过修改棱镜折射率和待测液体折射率的参数,通过直观几何光学分析,得到为何阿贝折射仪必须满足棱镜折射率大于待测折射率。利用程序易修改特点研究,棱镜不同顶角和考虑色散现象的模拟结果,定量研究差别。