Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

Gamma ray photon-induced modifications in Triafol-TN and Triafol-BN polymeric track detectors

Photon induced modifications in Triafol-TN and Triafol-BN polymers have been studied in the dose range of 10¹–10⁶ Gy at room temperature using a ⁶⁰Co source. To monitor the chemical and structural changes induced by gamma rays, UV, IR, and ESR studies were carried out. Thermal studies were also conducted for understanding the effects of gamma irradiations on these polymers. Variation of track etching characteristics and activation energy for bulk etching have been studied at different gamma rays doses. The experimental results are presented and discussed.     

Carbon thin films through laser ablation

Thin carbon films were deposited on silicon substrates at room temperature using a 0.355 μm Nd:YAG laser wavelength at low irradiance in the presence of argon gas. Various techniques including scanning electron microscopy, X-ray diffraction and Raman spectroscopy were used to analyze the film quality. The influence of the argon gas pressure on the properties of the films is demonstrated and a correlation with the optical emission data is presented.     

Parametric Excitation of the Electron-Acoustic Wave in a Multiply Ionized Plasma

Parametric excitation of the electron-acoustic wave (EAW) has been analysed using a hydrodynamical model. The plasma has been assumed to consist of multiply charged ions. The ratio (α) of the hotter ion concentration to that of the electrons is a sensitive parameter. The condition for the occurrence of the EAW is well satisfied for the smaller values of α. The growth rate of the instability gets enhanced by increasing α and the charge state of the hotter ions. The values of α can be varied within short range only.     

An integrated approach to the complete chemical analysis of magnesium or sodium diuranate (yellow cake) sample

A procedure for the complete chemical analysis of magnesium or sodium diuranate (yellow cake) sample is reported. Uranium is determined gravimetrically after peroxide precipitation. Optimum parameters, such as pH, quantity of hydrogen peroxide, volume of sample, temperature and complexing agent for quantitave precipitation of uranium, and effective separation of other elements were studied. Aluminum, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, and Zn were determined by flame atomic absorption spectrometer and B, Mo, SO₄, REEs and Y by inductively coupled plasma atomic emission spectrometer in the filtrates of hydroxide and peroxide precipitation separation. The proposed method is accurate and the precision is characterized by an RSD of ~0.2% for U; 2 to 6% for Mg, Na, K, Ca, Fe, SiO₂, Al, Cd, Co, Cr, Fe, Mn, Ni, Pb, and Zn and 3 to7% for REEs, Y, Mo and B     

Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Laser induced breakdown of Ar,N2 and O2 gases using 1.064, 0.532, 0.355 and 0.266 μm radiation

An experimental investigation of laser-induced breakdown using Nd:YAG laser harmonics for argon, nitrogen and oxygen gases is reported. Pressure dependence as well as wavelength dependence of the breakdown threshold irradianceI _th is investigated. The experimental observations for 1.064 and 0.532 m laser wavelengths are in agreement with theoretical calculations which include the effects of multiphoton ionization and cascade ionization.     

Underpotential deposition studies of copper on glassy carbon

Studies on the deposition and dissolution of copper from 0·5 M sulphuric acid solutions onto glassy carbon (GC) using potential sweep techniques indicated that an additional peak occurs at higher positive potentials than the bulk stripping peak. This peak is identified as due to the stripping of underpotential deposited (UPD) copper. Results of investigations on the effect of sweep rate, deposition potential and time of deposition on the peak characteristics of UPD and bulk deposited copper are also reported.