Peptide labeling using 188Re, 188Re-MAG3 and 153Sm-H1ETA: A comparison on their in vitro lipophilicity

Lanreotide peptide was labeled with ¹⁵³Sm-H₁ETA and ¹⁸⁸Re-MAG₃ in order to evaluate whether or not their conjugation to the peptide produce significant differences of the in vitro lipophilicity with respect to the ¹⁸⁸Re-lanreotide prepared by the direct labeling method (highly lipophilic). The differences of lipophilicity between the complexes, were evaluated using a reverse phase HPLC system. The measured lipophilicity of ¹⁵³Sm-H₁ETA-lanreotide, ¹⁸⁸Re-MAG₃-lanreotide and ¹⁸⁸Re-lanreotide was taken to be the capacity factor [k" = (t _R-t ₀)/t ₀ where t _R is the retention time and t ₀ is the dead time] for each of the complexes under identical chromatography conditions. Results showed that the in vitro lipophilicity decreased in the order ¹⁸⁸Re-lanreotide (direct labeling), ¹⁸⁸Re-MAG₃-lanreotide and ¹⁵³Sm-H₁ETA-lanreotide. Since the last one has a capacity factor (k") similar to that of ¹⁸⁸Re-MAG₃, some renal elimination for ¹⁵³Sm-H₁ETA-lanreotide could be expected, which probably would reduce the unnecessary radiation dose to normal tissues.     

Terpenoids of the red alga laurenciapinnatifida

The structures of three brominated terpenoids which are natural products from the red alga Laurencia pinnatifida (Gmal. Lamour) are described. The structures of the sesquiterpenes $\text{4}$ and $\text{5}$ were determined by spectral comparison and chemical interconversion. The structure of the squalene-derived terpenoid $\text{8}$ was secured by chemical transformation into thyrsiferol, a brominated triterpene previously isolated from the red alga Laurencia thyrsifera.     

Quality control of a detector for the calculations of radiopharmacokinetic parameters of 99mTc-glucarate in rats

Good manufacturing practices specify that a well-type scintillation NaI(Tl) crystal detector has to be validated in order to detect radioactivity from any radiopharmaceutical used to obtain radiopharmacokinetic parameters. A 5 cm well-type NaI(Tl) scintillation detector was coupled to a multi-channel analyzer centered at the 140 keV ^99mTc peak with a 20% window. The area represents counts per minute (cpm). All the net cpm were decay corrected. The activity source was ^99mTc-glucarate developed as an imaging agent for acute myocardial infarction. Wistar rats were injected in a tail vein with 0.1 ml (3.7 MBq) of ^99mTc-glucarate solution and 13 blood samples were taken. The cpm were the input data for the WINNONLN program which calculates radiopharmacokinetic parameters. The detector's efficiency for ^99mTc was 15.03% and the sensitivity 1.12 kBq/ml in plasma. The response was linear between 0.31-14.3 kBq/ml of ^99mTc-glucarate. The maximum assay variation coefficient was 2.79 and recovery of ^99mTc-glucarate in plasma was 99.8%±0.2%. LOD was 0.31 kBq and LOQ = 1.12 kBq in plasma samples. ^99mTc-glucarate follows a two-compartment model of distribution with Vd of 21.74 ml±2.71 ml; a Vdss of 74.36 ml±12.67 ml; t _{1/2 a}0.74 h±0.19 h; t _{1/2 b} 18.98 h±4.36 h; AUC = 32.75 mCi/min^.ml ± 3.73 mCi/min^.ml; MRT = 24.35 h±5.51 h and total clearance 3.05 ml/h±0.35 ml/h. The well-type detector fulfills the quality system requirements and the radiopharmacokinetic parameters for ^99mTc-glucarate in rats are reliable. This revised version was published online in July 2006 with corrections to the Cover Date.     

A Titration Microcalorimetric Study of the Effects of Halide Counterions on Vesicle-Forming Aggregation in Aqueous Solution of Branched-Chain Alkylpyridinium Surfactants

Titration microcalorimetry is used to study the influences of iodide, bromide, and chloride counterions on the aggregation of vesicle-forming 1-methyl-4-(2-pentylheptyl)pyridinium halide surfactants. Formation of vesicles by these surfactants was characterised using transmission electron microscopy. When the counterion is changed at 303 K through the series iodide, bromide, to chloride, the critical vesicular concentration (cvc) increases and the enthalpy of vesicle formation changes from exo- to endothermic. With increase in temperature to 333 K, vesicle formation becomes strongly exothermic. Increasing the temperature leads to a decrease in enthalpy and entropy of vesicle formation for all three surfactants. However the standard Gibbs energy for vesicle formation is, perhaps surprisingly, largely unaffected by an increase in temperature, as a consequence of a compensating change in both standard entropy and standard enthalpy of vesicle formation. Interestingly, standard isobaric heat capacities of vesicle formation are negative, large in magnitude but not strikingly dependent on the counterion. We conclude that the driving force for vesicle formation can be understood in terms of overlap of the thermally labile hydrophobic hydration shells of the alkyl chains. Copyright 2000 Academic Press.     

Kit for instant 99mTc labeling of the antimicrobial peptide ubiquicidin 29-41

Summary The ubiquicidin 29-41 fragment (UBI) is a cationic antimicrobial peptide. The aim of this study was to develop an instant kit formulation for the preparation of ^99mTc-UBI 29-41 in high radiochemical yield and to evaluate its use as an infection imaging agent in humans. The components were selected to produce a direct ^99mTc labeling, presumably to the amine groups of Lys and Arg7. ^99mTc-UBI 29-41 obtained from the lyophilized kit showed radiochemical purity of >97% with an average target/non-target ratio of 2.3±0.6 in positive infection sites at 2 hours. Kits were stable at 4 °C for over 6 months.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Synthesis of (22R, 25R)-3β,26-Dihydroxy-5α-furostan-6-one #

The synthesis of a plant growth promoter furostanol which bears the characteristic functionality of teasterone on rings A and B is described.

     

Chemical modification of methyl cellulose with HMDI to modulate the thickening properties in castor oil

This work deals with the selective incorporation of reactive isocyanate groups into methyl cellulose in order to be used as reactive thickening agent in castor oil. Resulting gel-like dispersions may have potential applications as green lubricating greases formulated from renewable resources. Two different isocyanate-functionalized methyl cellulose-based polymers were obtained by reaction of methyl cellulose with 1,6-hexamethylene diisocyanate. The functionalization degree, from fully functionalized to a certain number of free hydroxyl groups (58:36:6 ratio between –OMe, –NCO and free –OH groups), was controlled by modifying the reagents molar ratio. These polymers were characterized through nuclear magnetic resonance of protons (¹H-NMR), Fourier transform infrared spectroscopy and thermogravimetric analysis (TGA). Thermal and rheological responses of oleogels prepared by dispersing these polymers in castor oil were studied by means of TGA analysis and small-amplitude oscillatory shear measurements. The evolution of linear viscoelasticity functions with frequency of the oleogel containing isocyanate-functionalized methyl cellulose with lower –NCO content is quite similar to that found for traditional lithium lubricating greases. In relation to long-term stability of these oleogels, the values of viscoelastic functions significantly increase during the first 7 days of ageing and then remain almost constant.