Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

Reactions between ammonium sulphate and metal oxides (metal=Cr,Mn and Fe) and thermal decomposition of the products

The reactions between ammonium sulphate and three metal oxides (Cr₂O₃, MnO₂ and Fe₂O₃) were studied. It was confirmed by X-ray diffraction and chemical analysis that stable reaction intermediates were formed consecutively in the course of the reactions.These were (NH₄)₃M(SO₄)₃ and NH₄M(SO₄)₂ for Cr₂O₃ and Fe₂O₃ and (NH₄)₂Mn₂(SO₄)₃ for MnO₂. The thermal decompositions of these intermediates and of the metal sulphates were carried out. The contracting-volume equation was valid for the decomposition of all the intermediates. The Arrhenius parameters were determined.

---

Zusammenfassung Es wurden die Reaktionen zwischen Ammoniumsulfat und drei Metalloxiden (Cr₂O₃, MnO₂ und Fe₂O₃) untersucht. Durch Röntgendiffraktion und chemische Analyse wurde bestätigt, dass im Verlaufe der Reaktion stabile Zwischenprodukte gebildet werden. Es handelt sich dabei um (NH₄)₃M(SO₄)₃ und NH₄M(SO₄)₂ im Falle von Cr₂O₃ und Fe₂O₃ und um (NH₄)₂Mn₂(SO₄)₃ im Falle von MnO₂. Diese Zwischenprodukte und die Metallsulfate wurden thermisch zersetzt. Die Volumenkontraktionsgleichung war für die Zersetzung all dieser Zwischenprodukte gültig. Die Arrheniusparameter wurden bestimmt.

---

Cr₂O₃, MnO₂ Fe₂O₃. , . , (NH₄)₃M(SO₄)₃ NH₄M(SO₄)₂, (NH₄)₂Mn₂(SO₄)₃. . . .

     

Efficient synthesis of 2-modified 1alpha,25-dihydroxy-19-norvitamin D3 with Julia olefination: high potency in induction of differentiation on HL-60 cells

Six novel 2-substituted analogues of 1alpha,25-dihydroxy-19-norvitamin D(3), 6a,b-8a,b, were efficiently synthesized utilizing (-)-quinic acid as the A-ring precursor. The C2-modified A-rings were prepared as 4-alkylated (3R,5R)-3,5-dihydroxycyclohexanones 12-15 from (-)-quinic acid based on radical allylation at the C4 position of methyl (-)-quinicate. The new type of the CD-ring coupling partner 23 was synthesized from 25-hydroxy Grundmann's ketone 19 to apply to the modified Julia olefination to construct a diene unit between the A-ring and the CD-ring. The coupling yields, including a deprotection step, were 47-62%. After the separation of the diastereomers based on C2 stereochemistry, the structure (2alpha or 2beta) was determined by (1)H NMR experiments and compared to DeLuca's 2-methyl- and 2-ethyl-1alpha,25-dihydroxy-19-norvitamin D(3). Thus, the synthesized 2alpha-(3-hydroxypropyl)-1alpha,25-dihydroxy-19-norvitamin D(3) (8a) showed almost the same potency in binding to the bovine thymus vitamin D receptor (VDR) as the natural hormone 1, while its beta-isomer 8b had only a 3% affinity. Both 2alpha-allyl- and 2alpha-propyl-1alpha,25-dihydroxy-19-norvitamin D(3) (6a and 7a) and their 2beta-analogues (6b and 7b) possessed a weak affinity for the VDR. The strong VDR ligand 8a was ca. 36-fold more potent in induction of HL-60 cell differentiation than 1, and interestingly, even the weaker ligand 8b showed a 6.7-fold higher potency in the cell differentiation activity than that of 1.     

Polymerization of acrylamide initiated with pinacol–ceric ion redox system

Polymerization of acrylamide initiated with a pinacol–ceric ion redox system was investigated. The polymer obtained was found to contain one cerium atom in a polymer molecule. It was considered that the cerium atom was introduced into the polymer molecule by the termination reaction as there is no cerium atom in the initiating radical in the present system. A similar termination reaction was attained by ferric ion but not by cerous ion. The metal ion was considered to terminate the polymerization to form a stable polymer. Some considerations on the structure of the reaction product relating to the polymerization mechanism were discussed.     

Absolute stereochemistry of citrinadins a and B from marine-derived fungus

[Structure: see text]. Citrinadin A (2) is a pentacyclic indolinone alkaloid isolated from the cultured broth of a fungus, Penicillium citrinum, which was separated from a marine red alga. The absolute stereochemistry of the pentacyclic core in 2 and its new congener, citrinadin B (1), was elucidated by analysis of the ROESY spectrum for the chlorohydrin derivative (3) of 1 as well as comparison of the electronic circular dichroism (ECD) spectra for 1 and 2 with those of known spirooxiindole alkaloids. On the other hand, the absolute configuration at C-21 bearing an epoxide ring was assigned as S by comparison of the vibrational circular dichroism (VCD) spectra of 1 with those of model compounds 2S- and 2R-2,3-epoxy-3,3-dimethyl-1-phenylpropan-1-one (4a and 4b, respectively).     

Subincanadines A-C,novel quaternary indole alkaloids from Aspidosperma subincanum

Three novel quaternary indole alkaloids with an unprecedented 1-azoniatricyclo[4.3.3.0(1,5)]undecane moiety, subincanadines A-C (1-3), as well as two new indole alkaloids with a 1-azabicyclo[5.2.2]undecane moiety, subincanadines D (4) and E (5), and a new indole alkaloid with a 1-azabicyclo[4.3.1]decane moiety, subincanadine F (6), have been isolated from the barks of Aspidosperma subincanum Mart, and the structures of 1-6 and the stereochemistry of 1-3 were elucidated by spectroscopic data and chemical means.     

Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes

This paper describes mechanistic studies on the functionalization of arenes with the diboron reagent B(2)pin(2) (bis-pinacolato diborane(4)) catalyzed by the combination of 4,4'-di-tert-butylbipyridine (dtbpy) and olefin-ligated iridium halide or olefin-ligated iridium alkoxide complexes. This work identifies the catalyst resting state as [Ir(dtbpy)(COE)(Bpin)(3)] (COE = cyclooctene, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaborolanyl). [Ir(dtbpy)(COE)(Bpin)(3)] was prepared by independent synthesis in high yield from [Ir(COD)(OMe)](2), dtbpy, COE, and HBpin. This complex is formed in low yield from [Ir(COD)(OMe)](2), dtbpy, COE, and B(2)pin(2). Kinetic studies show that this complex reacts with arenes after reversible dissociation of COE. An alternative mechanism in which the arene reacts with the Ir(I) complex [Ir(dtbpy)Bpin] after dissociation of COE and reductive elimination of B(2)pin(2) does not occur to a measurable extent. The reaction of [Ir(dtbpy)(COE)(Bpin)(3)] with arenes and the catalytic reaction of B(2)pin(2) with arenes catalyzed by [Ir(COD)(OMe)](2) and dtbpy occur faster with electron-poor arenes than with electron-rich arenes. However, both the stoichiometric and catalytic reactions also occur faster with the electron-rich heteroarenes thiophene and furan than with arenes, perhaps because eta(2)-heteroarene complexes are more stable than the eta(2)-arene complexes and the eta(2)-heteroarene or arene complexes are intermediates that precede oxidative addition. Kinetic studies on the catalytic reaction show that [Ir(dtbpy)(COE)(Bpin)(3)] enters the catalytic cycle by dissociation of COE, and a comparison of the kinetic isotope effects of the catalytic and stoichiometric reactions shows that the reactive intermediate [Ir(dtbpy)(Bpin)(3)] cleaves the arene C-H bond. The barriers for ligand exchange and C-H activation allow an experimental assessment of several conclusions drawn from computational work. Most generally, our results corroborate the conclusion that C-H bond cleavage is turnover-limiting, but the experimental barrier for this bond cleavage is much lower than the calculated barrier.     

Homoleptic cyclometalated iridium complexes with highly efficient red phosphorescence and application to organic light-emitting diode

Phosphorescence studies of a series of facial homoleptic cyclometalated iridium(III) complexes have been carried out. The complexes studied have the general structure Ir(III)(C-N)(3), where (C-N) is a monoanionic cyclometalating ligand: 2-(5-methylthiophen-2-yl)pyridinato, 2-(thiophen-2-yl)-5-trifluoromethylpyridinato, 2,5-di(thiophen-2-yl)pyridinato, 2,5-di(5-methylthiophen-2-yl)pyridinato, 2-(benzo[b]thiophen-2-yl)pyridinato, 2-(9,9-dimethyl-9H-fluoren-2-yl)pyridinato, 1-phenylisoquinolinato, 1-(thiophen-2-yl)isoquinolinato, or 1-(9,9-dimethyl-9H-fluoren-2-yl)isoquinolinato. Luminescence properties of all the complexes at 298 K in toluene are as follows: quantum yields of phosphorescence Phi(p) = 0.08-0.29, emission peaks lambda(max) = 558-652 nm, and emission lifetimes tau = 0.74-4.7 micros. Bathochromic shifts of the Ir(thpy)(3) family [the complexes with 2-(thiophen-2-yl)pyridine derivatives] are observed by introducing appropriate substituents, e.g., methyl, trifluoromethyl, or thiophen-2-yl. However, Phi(p) of the red emissive complexes (lambda(max) > 600 nm) becomes small, caused by a significant decrease of the radiative rate constant, k(r). In contrast, the complexes with the 1-arylisoquinoline ligands are found to have marked red shifts of lambda(max) and very high Phi(p) (0.19-0.26). These complexes are found to possess dominantly (3)MLCT (metal-to-ligand charge transfer) excited states and have k(r) values approximately 1 order of magnitude larger than those of the Ir(thpy)(3) family. An organic light-emitting diode (OLED) device that uses Ir(1-phenylisoquinolinato)(3) as a phosphorescent dopant produces very high efficiency (external quantum efficiency eta(ex) = 10.3% and power efficiency 8.0 lm/W at 100 cd/m(2)) and pure-red emission with 1931 CIE (Commission Internationale de L'Eclairage) chromaticity coordinates (x = 0.68, y = 0.32).     

Preferential hydration and the exclusion of cosolvents from protein surfaces

Protein stability is enhanced by the addition of osmolytes, such as sugars and polyols and inert crowders, such as polyethylene glycols. This stability enhancement has been quantified by the preferential hydration parameter which can be determined by experiments. To understand the mechanism of protein stability enhancement, we present a statistical mechanical analysis of the preferential hydration parameter based upon Kirkwood-Buff theory. Previously, the preferential hydration parameter was interpreted in terms of the number of hydration waters, as well as the cosolvent exclusion volume. It was not clear how accurate these interpretations were, nor what the relationship is between the two. By using the Kirkwood-Buff theory and experimental data, we conclude that the contribution from the cosolvent exclusion dominantly determines the preferential hydration parameters for crowders. For osmolytes, although the cosolvent exclusion largely determines the preferential hydration parameters, the contribution from hydration may not be negligible.