Large-volume injection electrothermal AAS combined with tungsten-treated pyrolytic graphite furnace: determination of cadmium in tap, snow and river water samples with phosphate modifier.

A large-volume (100 microl) injection-ETAAS with W-treated PG furnace combined with a phosphate modifier was applied to the determination of unpolluted levels of Cd in tap, snow and river-water samples. The limit of detection of 1.1 ng l(-1) was observed for a 4 w/v% NH4H2PO4 modifer. Matrix interference studies were tested for major ion species well found in fresh water. The direct determination of Cd in certified river water (12 +/- 2 ng l(-1)) was carried out and the observed value was in agreement with the certified one. The good recoveries of Cd added to real environmental water samples were also observed. This method was applied to the determination of Cd in unpolluted environmental water samples.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Polymerization of α-amino acid N-carboxy anhydride. IX. Copolymerization of α-amino acid N-carboxy anhydride in heterogeneous system

Copolymerization of NCA's was undertaken in a heterogeneous system in acetonitrile, which is not a solvent of the polypeptides. The reactivity ratio was calculated by using the Lewis-Mayo equation. Further, the conversion rate in the copolymerization and the configuration of the copolymer produced were compared with those of the copolymerization in the homogeneous system in nitrobenzene, in which the copolypeptides are swollen. The rate of copolymerization in acetonitrile was between the rates of polymerization of the individual monomers. It has been reported that the configuration of the copolymer obtained in dimethylformamide, in which the copolypeptides are swollen, is of the block type. On the other hand, many polypeptides obtained in acetonitrile, which is not a solvent of the copolypeptides, had a random configuration near to an alternating configuration.     

High performance liquid chromatography post-column chemiluminescence determination of sulfonamide residues in milk at low concentration levels using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate as chemiluminescent reagent

The determination of seven sulfonamides by means of HPLC with chemiluminescence detection is proposed for the first time. The analytes are derivatized with fluorescamine, separated and subsequently they participate in the post-column chemiluminescence (CL) peroxyoxalate system using imidazole as a catalyst. Among the different peroxyoxalates tested, bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate provides higher sensitivities and stabilities, avoiding precipitation problems. A rigorous optimization of the significant variables by means of experimental designs has been developed in order to reconcile the chromatographic conditions with the CL reaction. The method provides detection limits in the low microgl(-1) range and has been satisfactorily applied to the analysis of spiked raw milk samples.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Dianion of sulfinylacetone as a synthetic equivalent of beta-enolate of propionic acid: a novel synthesis of carboxylic acids from alkyl halides with three-carbon elongation

The reaction of the dianion of phenylsulfinylacetone with alkyl halides afforded beta-keto sulfoxides, which were first chlorinated with hexachloroethane and then treated successively with KH and t-BuLi to give carboxylic acids in three-steps in moderate overall yields from the alkyl halides. This procedure affords a good method for a synthesis of carboxylic acids from alkyl halides with three-carbon elongation.     

Automatic semi-microcolumn liquid chromatographic determination of catecholamines in rat plasma utilizing peroxyoxalate chemiluminescence reaction

A fully automated and highly sensitive method with a semi-microcolumn liquid chromatography system for the determination of rat plasma catecholamines (CAs) was developed. Automated on-line extraction of CAs in diluted plasma using a precolumn packed with strong acidic cation exchange resin was coupled with separation of CAs on a semi-microcolumn (250 x 1.5 mm id). fluorogenic derivatization with ethylenediamine and finally postcolumn peroxyoxalate chemiluminescence detection utilizing bis[2-(3,6,9-trioxadecanyloxycarbonyl)-4-nitrophenyl]oxalate (TDPO) and hydrogen peroxide. The detection limits were 0.91, 0.36 and 1.1 fmol for norepinephrine (noradrenaline), epinephrine (adrenaline) and dopamine, respectively, at a signal-to-noise ratio of 3. A good linearity of the calibration curve for each CA was observed in the range of 5.0 to 500 fmol for each CA using N-methyldopamine (N-MeDA) as an internal standard. The RSD for the proposed method (n = 5) were 3.7-9.5% for the intra-day assay and 6.6-10.0% for the inter-day assay. The volume of rat plasma required for the determination of CAs was 10 microliters.     

Preparation and properties of polyamides and polymides containing bibenzyl,stilbene, and tolan structures

Polyisophthalamides and polyterephthalamides were prepared by the solution polycondensation of the corresponding diacyl chlorides with 4,4′-diaminobibenzyl, trans-4,4′-diaminostilbene, and 4,4′-diaminotolan in N,N-dimethylacetamide (DMAc). Polypyromellitimides were synthesized in two steps by the ring-opening polyaddition of pyromellitic dianhydride with the aromatic diamines in DMAc, followed by thermal cyclodehydration. The amorphous polyisophthalamides were soluble in some amide solvents containing lithium chloride, while the polyterephthalamides having fair degree of crystallinity were insoluble in these solvents. The thermal stability of these aromatic polymers decreased in the order of the tolan-containing polymers > the stilbene-containing polymers > the bibenzyl-containing polymers, both in air and under nitrogen.     

A fluorimetric, column-switching HPLC and its application to an elimination study of LLU-alpha enantiomers in rat plasma

A method for the enantiomeric determination of 2,7,8-trimethyl-2-(beta-carboxyethyl)-6-hydroxy chroman (LLU-alpha, gamma-CEHC) in rat plasma was developed using high-performance liquid chromatography (HPLC) with a fluorimetric derivatization with 4-N, N-dimethylaminosulfonyl-7-piperazino-2,1,3-benzoxadiazole (DBD-PZ) followed by O-acetylation with acetyl chloride. The proposed HPLC system used two non-chiral columns (phenyl and octadecylsilica) and a chiral column (a modified cellulose type), which were connected via two column-switching valves. A derivatized sample prepared from rat plasma was first separated on the phenyl column, and the fraction including LLU-alpha derivative was introduced to the octadecylsilica column to quantify the concentration of the mixture of S- and R-LLU-alpha. Finally, the LLU-alpha derivative was directly injected into the chiral column to obtain the ratio of the enantiomers. The proposed HPLC system was applied to the enantiomeric determination of LLU-alpha in plasma after intravenous administration of racemic LLU-alpha. S-LLU-alpha was eliminated faster than R-LLU-alpha, and its concentration in plasma decreased to one-third at 2 min after dosing.