Synthesis of Small‐Sized,Porous, and Low‐Toxic Magnetite Nanoparticles by Thin POSS Silica Coating

In this communication, we report the synthesis of small‐sized (<10 nm), water‐soluble, magnetic nanoparticles (MNPs) coated with polyhedral oligomeric silsesquioxanes (POSS), which contain either polyethylene glycol (PEG) or octa(tetramethylammonium) (OctaTMA) as functional groups. The POSS‐coated MNPs exhibit superparamagnetic behavior with saturation magnetic moments (51–53 emu g^?1) comparable to silica‐coated MNPs. They also provide good colloidal stability at different pH and salt concentrations, and low cytotoxicity to MCF‐7 human breast epithelial cells. The relaxivity data and magnetic resonance (MR) phantom images demonstrate the potential application of these MNPs in bioimaging.     

A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

Influence of solvents on the formation of ultrathin uniform poly(vinyl pyrrolidone) nanofibers with electrospinning

Although there have been many reports on the preparation and applications of various polymer nanofibers with the electrospinning technique, the understanding of synthetic parameters in electrospinning remains limited. In this article, we investigate experimentally the influence of solvents on the morphology of the poly(vinyl pyrrolidone) (PVP) micro/nanofibers prepared by electrospinning PVP solution in different solvents, including ethanol, dichloromethane (MC) and N,N‐dimethylformamide (DMF). Using 4 wt % PVP solutions, the PVP fibers prepared from MC and DMF solvents had a shape like a bead‐on‐a‐string. In contrast, smooth PVP nanofibers were obtained with ethanol as a solvent although the size distribution of the fibers was somewhat broadened. In an effort to prepare PVP nanofibers with small diameters and narrow size distributions, we developed a strategy of using mixed solvents. The experimental results showed that when the ratio of DMF to ethanol was 50:50 (w/w), regular cylindrical PVP nanofibers with a diameter of 20 nm were successfully prepared. The formation of these thinnest nanofibers could be attributed to the combined effects of ethanol and DMF solvents that optimize the solution viscosity and charge density of the polymer jet. In addition, an interesting helical‐shaped fiber was obtained from 20 wt % PVP solution in a 50:50 (w/w) mixed ethanol/DMF solvent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3721–3726, 2004     

Effect of the subdivision strategy on convergence and efficiency of some global optimization algorithms

We investigate subdivision strategies that can improve the convergence and efficiency of some branch and bound algorithms of global optimization. In particular, a general class of so called weakly exhaustive simplicial subdivision processes is introduced that subsumes all previously known radial exhaustive processes. This result provides the basis for constructing flexible subdivision strategies that can be adapted to take advantage of various problem conditions.     

Renormalization Effects in the Spectrum of a Coherently Driven Exciton–Biexciton System

Starting from the total Hamiltonian of an excited exciton–biexciton system, nonresonant renormalizations in the electronic spectrum of a coherently driven direct semiconductor are considered. Stringent group-theoretical inclusion of the particle spin in the Hamiltonian allows one to account for the dependence of different renormalization effects on polarizations of the incident laser fields. On the example of circularly polarized driving and probing pulses it is shown that the kind of observed renormalization is defined by the pump-and-probe polarization geometry. Thus, the exciton optical Stark effect must appear in the case of co-circular pump-and-probe, whereas a mixing of the polariton and biexciton spectra is possible only in the case of counter-circular pump-and-probe. The polariton--biexciton dispersion renormalization may manifest itself as synchronous splittings of the exciton--polariton and biexciton spectra under resonant pumping at a frequency of the polariton--biexciton transition, or in their shifts in opposite directions under near-resonant pumping. The mechanisms of both kinds of renormalization effects are analyzed, and the dependence of their characteristics on the pump parameters and microscopic parameters of the exciton–biexciton–photon system is established. An evaluation of the characteristics shows that the effect of polariton–biexciton dispersion renormalization dominates in the spectra of semiconductors with stable biexciton formation. Results of the theoretical study provide an adequate explanation of available experimental data.     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

Anticancer agent development: X-ray crystal structure and keto-enol tautomerism of dimethyl 1-hydroxy-6,7-methylenedioxy-4-(3′,4′,5′-trimethoxyphenyl-trans-3,4-dihydronaphthalene-2,3-dicarboxylate

Structural and conformational information obtained from the crystal structure and solution¹H nmr investigations of the title compound are compared. The 4-aryltetralone, C₂₄H₂₄O₁₀, crystallizes as a chloroform solvate in the monoclinic space group, P2₁/n, witha=12.519(4),b=17.938(6),c=12.534(9)Å,=111.90(5)°, and D_calc=1.51 g cm^–3 forZ=4. The data for this compound were collected at –150°C. Least-squares refinement of 2796 observed [F _o5(F _o)] reflections led to the final agreement index ofR=0.062. A threefold static disorder was observed for one of the carboxyl groups. The second carboxyl group participates in an intramolecular hydrogen bond and is thus ordered. The¹H nmr spectrum revealed the title compound to exist as a keto-enol tautomeric mixture in solution. Vicinal hydrogen coupling constant analysis proved reliable in ascertaining B-ring stereochemistry of 2,3-disubstituted-4-aryltetralones.     

Hydrothermal Synthesis and X‐Ray Structural Characterization of Manganese,Nickel, and Cadmium Coordination Polymers Containing 2,3‐Pyridinedicarboxylate as Multidentate Ligands

Three divalent transiton‐metal complexes of 2,3‐pyridinedicarboxylate (2,3‐pda²), [Mn(2,3‐pda)‐(H₂O)3]_∞ ( 7 ), [Ni(2,3‐pda)(H₂O)3]_∞ ( 8 ), and [Cd2(2,3‐pda)₂(H₂O)]_∞ ( 9 ) have been hydrothermally synthesized and structurally characterized. X‐ray diffraction analyses reveal that compounds 7 and 8 are zigzag‐ and linear‐type one‐dimension (1D) coordination polymers, respectively, whereas compound 9 is a three‐dimension (3D) coordination polymer. A simple comparison of the coordination geometries with the available neutral analogues {M_x(2,3‐pda)_x(H₂O)_y}_∞ containing one or two divalent transition‐metal atoms and equal ligands in the presence or absence of coordinated water molecules is also presented.     

Metal clips induce folding of a short unstructured peptide into an alpha-helix via turn conformations in water. Kinetic versus thermodynamic products

Short peptides corresponding to two to four alpha-helical turns of proteins are not thermodynamically stable helices in water. Unstructured octapeptide Ac-His1-Ala2-Ala3-His4-His5-Glu6-Leu7-His8-NH(2) (1) reacts with two [Pd((15)NH(2)(CH(2))(2)(15)NH(2))(NO(3))(2)] in water to form a kinetically stable intermediate, [[Pden](2)[(1,4)(5,8)-peptide]](2), in which two 19-membered metallocyclic rings stabilize two peptide turns. Slow subsequent folding to a thermodynamically more stable two-turn alpha-helix drives the equilibrium to [[Pden](2)[(1,5)(4,8)-peptide]] (3), featuring two 22-membered rings. This transformation from unstructured peptide via turns to an alpha-helix suggests that metal clips might be useful probes for investigating peptide folding.