A Stability-Indicating LC Method for Candesartan Cilexetil

An isocratic reversed-phase liquid chromatographic method has been developed for quantitative determination of candesartan cilexetil, used to treat hypertension, in the bulk drug and in pharmaceutical dosage forms. The method is also applicable to analysis of related substances. Chromatographic separation was achieved on a 250 mm × 4.6 mm, 5 μm particle, CN column with a 50:50 (v/v) mixture of phosphate buffer, pH 3.0, and acetonitrile as mobile phase. The flow rate was 1.0 mL min⁻¹ and the detection wavelength was 210 nm. Resolution of candesartan cilexetil and six potential impurities was greater than 2.0 for all pairs of compounds. The drug was subjected to hydrolytic, oxidative, photolytic, and thermal stress and substantial degradation occurred in alkaline and acidic media and under oxidative and hydrolytic stress conditions. The major product obtained as a result of basic hydrolysis was different from that produced by acid hydrolysis and aqueous hydrolysis. The stress samples were assayed against a reference standard and the mass balance was found to be close to 99.6%. The method was validated for linearity, accuracy, precision, and robustness.     

Synthesis and Characterization of Some New Benzimidazole Derivatives

Synthesis of nine new benzimidazole derivatives was reported. The products were identified by ¹H NMR, mass spectroscopy, and infrared spectroscopy.     

Towards Multipotent Coatings: Chemical Vapor Deposition and Biofunctionalization of Carbonyl‐Substituted Copolymers

Future advances in designing bioactive materials, such as antithrombotic coatings for cardiovascular stents, will require widely applicable and robust methods of surface modification. In this paper, we report on the development of multifunctional polymer coatings made by chemical vapor deposition (CVD) copolymerization. Polymer coatings of various [2.2]paracyclophane derivatives were co‐deposited in controlled ratios and their chemical composition verified by FT‐IR and X‐ray photoelectron spectroscopy. Furthermore, preliminary biocompatibility of these coatings was assessed using human umbilical vein endothelial cells and 3T3 murine fibroblasts. The parallel immobilization of two different antithrombotic biomolecules onto a CVD‐based copolymer is also demonstrated by orthogonal immobilization strategies.

     

A Validated Chiral LC Method for the Separation and Quantification of (S,R,S)-Enantiomer and (R,R,R)-Isomer of Aprepitant

A new and accurate chiral liquid chromatographic method has been developed for the separation and quantification of (S,R,S)-enantiomer (unwanted enantiomer) and (R,R,R)-isomer (key intermediate) of aprepitant in bulk drug and formulation samples of apprepitant. The elution time was approximately 20 min using an immobilized amylose-based chiral stationary phase (Chiralpak-IA). The mobile phase was n-hexane and ethanol (90:10, v/v) and was delivered at a flow rate of 1.0 mL min^?1. Detection was carried out with a wavelength set to 220 nm. The resolution factor between enantiomers was found to be greater than five. Limit of detection for both (S,R,S) enantiomer and (R,R,R) isomer of aprepitant was 0.035 µg, and limit of quantification for both (S,R,S) enantiomer and (R,R,R) isomers of aprepitant was 0.1 µg, for a 10 µL injection. The developed method showed excellent linearity (r > 0.999) for both isomers. When the method was applied to bulk drug samples and in pharmaceutical formulations recoveries were obtained ranging from 97.2 to 103.1%. Aprepitant sample solutions were found to be stable when characterized over a period of 48 h.     

Optimization of critical medium components for the maximal production of gentamicin by Micromonospora echinospora ATCC 15838 using response surface methodology

Optimization of the fermentation medium components for maximum gentamicin production by Micromonospora echinospora ATCC 15838 was carried out. Response surface methodology was applied to optimize the medium constituents. A 2⁴full-factorial central composite design was chosen to explain the combined effects of the four medium constituents, viz. starch, soyabean meal, K₂HPO₄, and CoCl₂ and to design a minimum number of experiments. A second order model was developed and fitted using least square method. The R ² value of the model was 0.9723, which shows that model is best fit for the present studies. The results of analysis of variance and regression of a second order model showed that the linear effects of starch (p<0.001697) and CoCl₂(p<7.99E-13), and cross product effects of starch and soyabean meal (p<0.029876) and soyabean meal and CoCl₂ (p<0.008909) were more significant, suggesting that these were critical variables having the greatest effect on the production of gentamicin in the production medium. The optimized medium consisting of 9 g/L starch, 3 g/L soyabean meal, 0.9 g/L K₂HPO₄, and 0.01 g/L CoCL₂ predicted 850 mg/L of gentamicin which was almost 110% higher than that of the unoptimized medium. The amounts of starch, soyabean meal, and K₂HPO₄ required were also reduced with RSM.     

Phosphorus-doped carbon nanoparticles supported palladium electrocatalyst for the hydrogen evolution reaction (HER) in PEM water electrolysis

Hydrogen production by PEM water electrolysis is one of the most efficient methods, due to the produced high purity of gases, high efficiency, and devoid of harmful emissions. In this study, phosphorus-doped carbon nanoparticles (P-CNPs) were synthesized by spray pyrolysis method in chemical vapor deposition (CVD). The synthesized P-CNPs were used as electron carrier support materials for the preparation of P-CNPs-supported palladium (Pd/P-CNPs) electrocatalyst and also used as the hydrogen evolution reaction (HER) electrode in PEM water electrolysis. These synthesized Pd/P-CNPs were characterized by field emission scanning electron microscope, energy-dispersive X-ray spectroscopy, X-ray diffraction, and cyclic voltammetry methods. The membrane electrode assemblies (MEAs) were fabricated using Pd/P-CNPs as a cathode catalyst for the HER and RuO₂ as the anode for oxygen evolution reaction (OER). The fabricated MEA electrochemical performances along with their corresponding yields of hydrogen production were evaluated in PEM water electrolyzer single cell assemblies at various experimental conditions. The obtained results showed that the synthesized Pd/P-CNPs observed a current density of 1 A cm^?2 at 2 V at 80 °C. Further, long-term stability tested for up to 500 h continuously and showed the reasonable stability with similar electrochemical activity compared to commercial Pt/CB. Hence, the synthesized Pd/P-CNPs could be used as the alternative to Pt-based catalysts for HER.     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Validated Chiral LC Method for the Enantiomeric Separation of Palonosetron Hydrochloride

A new and accurate chiral liquid chromatographic method has been developed for the separation of palonosetron hydrochloride (PALO) and its (R,R)-enantiomer in bulk drug samples with an elution time of about 20 min. The chromatographic separation was carried out by normal phase chromatography using an immobilized cellulose based chiral stationary phase (Chiralpak-IC) with a mobile phase composed of n-hexane:ethanol:1,4 dioxane:trifluoroacetic acid:diethylamine (65:30:5:0.3:0.3, v/v) pumped at a flow rate of 1.0 mL min⁻¹. The resolution (R _s ) between the enantiomers was found to be greater than 3.0 and interestingly the (R,R)-enantiomer was eluted prior to the (S,S)-enantiomer (PALO) in the developed method. Mobile phase additives, trifluoroacetic acid and diethylamine played a key role in achieving chromatographic resolution between the enantiomers and also in enhancing chromatographic efficiency. The limit of detection (LOD) and limit of quantification (LOQ) of the (R,R)-enantiomer were found to be 0.03 and 0.1 μg respectively for 10 μL injection volume. The developed method shows excellent linearity (r ² > 0.999) over a range of LOQ to 0.3% for the (R,R)-enantiomer. The percentage recovery of the (R,R)-enantiomer in bulk drug samples ranged from 97.2 to 102.3 revealing good sensitivity of the developed method. Robustness studies were also carried out on the developed method.

     

A Validated LC Method for Determination of the Enantiomeric Purity of Darifenacin in Bulk Drug and Extended Release Tablets

A new and accurate chiral liquid chromatographic method has been developed for the determination of enantiomeric purity of darifenacin [(S)-enantiomer] in bulk drugs and extended release tablets. Normal phase chromatographic separation was performed on an immobilized cellulose based chiral stationary phase (Chiralpak-IC) with n-hexane:ethanol:diethylamine (50:50:0.3, v/v/v) as mobile phase at a flow rate of 1.0 mL min⁻¹. The elution time was ~15 min. The resolution (R _s ) between the enantiomers was greater than four and interestingly the (R)-enantiomer was eluted prior to darifenacin in the developed method. The limit of detection (LOD) and limit of quantification (LOQ) for the (R)-enantiomer were 0.02 μg and 0.07 μg, respectively, for a 10 μL injection volume. The method was extensively validated in terms of linearity, precision and accuracy and satisfactory results were obtained. Robustness studies were also conducted. The sample solution stability of darifenacin was determined and the compound was found to be stable for a study period of 48 h.

     

Stress Degradation Studies on Tadalafil and Development of a Validated Stability-Indicating LC Assay for Bulk Drug and Pharmaceutical Dosage Form

A stability-indicating HPLC assay method was developed for the quantitative determination of tadalafil in bulk samples and in pharmaceutical dosage forms in the presence of the degradation products. It involved a 250 mm × 4.6 mm, 5 μm C-18 column. The gradient LC method employs solution A and B as mobile phase. Solution A contains a mixture of buffer (phosphate buffer and tetra-n-butyl ammonium hydrogen sulfate) pH 2.5: acetonitrile (80:20, v/v) and solution B contains a mixture of water: acetonitrile (20:80, v/v). The flow rate was 1.0 mL min⁻¹ and the detection wavelength was 220 nm. The retention time of tadalafil is about 17 min. Tadalafil was subjected to different ICH prescribed stress conditions. Degradation was found to occur in hydrolytic and to some extent in oxidative stress conditions, while the drug was stable to photolytic and thermal stress. The drug was particularly labile under alkaline hydrolytic conditions. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. The assay of stress samples was calculated against a qualified reference standard and the mass balance was close to 99.5%. The developed RP-LC method was validated with respect to linearity, accuracy, precision and ruggedness.