Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Gas chromatographic-mass spectrometric determination of oxolinic acid in fish using selected ion monitoring

A gas chromatographic-mass spectrometric (GC-MS) method is described for the determination of oxolinic acid in fish tissues. oxolinic acid is reduced with sodium tetrahydroborate to permit GC analysis. The sample is homogenized with phosphate buffer (pH 6) and extracted with ethyl acetate. The extract is partitioned between sodium hydrogencarbonate solution and the aqueous phase is acidified and re-extracted with ethyl acetate. The residue from the ethyl acetate extract is dissolved in methanol and reduced with sodium tetrahydroborate. The reduction product is extracted with diethyl ether and analysed by GC-MS in the selected ion monitoring mode for the ions at m/z 204, 219 and 176. The detection limit is 0.001 mg/kg and the recoveries were 95.6% [relative standard deviation (R.S.D.) 7.7%] at 0.1 mg/kg and 72.9% (R.S.D. 13.3%) at 0.01 mg/kg fortification levels in fish.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.     

Fast and quantitative analysis of branched-chain amino acids in biological samples using a pillar array column

In this study, a fast and quantitative determination method for branched-chain amino acids (BCAAs), namely leucine, isoleucine, and valine, was developed using a pillar array column. A pillar array column with low-dispersion turns was fabricated on a 20?×?20-mm² microchip using multistep ultraviolet photolithography and deep reactive ion etching. The BCAAs were fluorescently labeled with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), followed by reversed-phase separation on the pillar array column. The NBD derivatives of the three BCAAs and an internal standard (6-aminocaproic acid) were separated in 100 s. The calibration curves for the NBD-BCAAs had good linearity in the range of 0.4–20 μM, using an internal standard. The intra- and interday precisions were found to be in the ranges of 1.42–3.80 and 2.74–6.97 %, respectively. The accuracies for the NBD-BCAA were from 90.2 to 99.1 %. The method was used for the analysis of sports drink and human plasma samples. The concentrations of BCAAs determined by the developed method showed good agreements with those determined using a conventional high-performance liquid chromatography system. As BCAAs are important biomarkers of some diseases, these results showed that the developed method could be a potential diagnostic tool in clinical research.     

Conformation and Atropisomeric Properties of Indometacin Derivatives

The stereochemistry around the N‐benzoylated indole moiety of indometacin was studied by restricting the rotation about the N? C7′ and/or C7′? C1′ bond. In the 2′,6′‐disubstituted ones, an atropisomeric property was found and the atropoisomers were separated and isolated as stable forms. Their biological abilities to inhibit cyclooxygenase‐1 (COX‐1) and cyclooxygenase‐2 (COX‐2) were examined. Only the aR‐isomer showed specific inhibition of COX‐1, and COX‐2 was not inhibited by either atropisomer. Conformational analysis in NMR studies and X‐ray crystallography, and CD spectra in combination with calculations were utilized to elucidate the bioactive conformations.     

An assembled complex of palladium and non-cross-linked amphiphilic polymer: a highly active and recyclable catalyst for the Suzuki-Miyaura reaction

An insoluble and assembled catalyst of palladium and a non-cross-linked amphiphilic polymer were developed. In the presence of 50-500 ppm mol equiv of catalyst, the Suzuki-Miyaura reaction proceeded efficiently under organic solvent-free conditions. The catalyst was reused 10 times without any decrease in activity and was recycled without any special treatment.[structure: see text]     

Novel synthesis of L-ribose from D-mannono-1,4-lactone

[reaction: see text] D-Mannono-1,4-lactone was efficiently converted into L-ribose in eight steps. A key step of this synthesis is the cyclization of a gamma-hydroxyalkoxamate under Mitsunobu conditions. It is noteworthy that the O-alkylation product was obtained in 94% yield and that none of the N-alkylation product was detected in this cyclization.     

A novel action of terpendole E on the motor activity of mitotic Kinesin Eg5

To reveal the mechanism of mitosis, the development of M phase-specific inhibitors is an important strategy. We have been screening microbial products to find specific M phase inhibitors that do not directly target tubulins, and rediscovered terpendole E (TerE) as a novel Eg5 inhibitor. TerE did not affect microtubule integrity in interphase, but induced formation of a monoastral spindle in M phase. TerE inhibited both motor and microtubule-stimulated ATPase activities of human Eg5, but did not affect conventional kinesin from either Drosophila or bovine brain. Although terpendoles have been reported as inhibitors of acyl-CoA:cholesterol O-acyltransferase (ACAT), the Eg5 inhibitory activity of TerE was independent of ACAT inhibition. Taken together, we demonstrate that TerE is a novel Eg5 inhibitor isolated from a fungal strain.