Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

Ion chromatographic analysis of cyanate in gold processing samples containing large concentrations of copper(I) and other metallocyanide complexes

An ion chromatographic (IC) method was developed for the determination of cyanate in gold cyanidation samples containing large concentrations of metallo-cyanide complexes. The analysis was performed on a Waters HC IC-Pak A anion-exchange column with an anthranilic acid eluent, with detection achieved using indirect UV at 355 nm. Two procedures were developed for removal of the metallo-cyanide complexes prior to the IC analysis. The first was a manual off-line method which used solid-phase extraction cartridges containing a strong anion-exchange resin to trap the complexes and to then enable determination of cyanate without interference. In the second approach, an automated on-line method was developed which used an anion-exchange guard column to trap the complexes and a column switching valve to allow backflushing of the cyanate from the guard column. This enabled the total analysis to be performed in a time of 10–14 min, depending on the sample composition. Finally, a comparison of results obtained by the standard Kjeldahl nitrogen method for cyanate and the IC method revealed an interference in the Kjeldahl method for samples containing large concentrations of Cu(I)-cyanide complexes.     

Anti-atherosclerotic activity of Betulinic acid loaded polyvinyl alcohol/methylacrylate grafted Lignin polymer in high fat diet induced atherosclerosis model rats

Betulinic acid is one such natural pentacyclic triterpenoid compound, holding various pharmacological properties but its poor bioavailability is the only limitation. One of the biological macromolecules such as Lignin is a plant-derived aromatic, eco-friendly and low-cost polymer that certainly self-assembles into nano-sized colloids. Therefore, onto the current investigation, we increased the bioavailability of betulinic acid by coating on to a nanopolymer prepared with poly vinyl alcohol, lignins and methyl acrylate. Betulinic acid loaded polyvinyl alcohol/ethylacrylate grafted Lignin polymer (PVA/Lig-g-MA) nanoformulation was characterized using FTIR, XRD, SEM and TEM analysis and also the drug entrapment, in vitro drug releasing capacity was done to examine the efficiency of the nanoformulation of a drug. The MTT assay was evaluated the cytotoxicity of synthesized nanoformulation against normal endothelial cells HUVEC and HAPEC to confirm the side effects of the drug. The anti-atherosclerotic property of the nanoformulation was ascertained in both in vitro condition (with HUVEC and HPAEC) and in vivo studies (with Wistar rats). As a result, the characterization studies and in vitro studies clearly confirmed the Betulinic acid loaded PVA/Lig-g-MA nanoformulation is an ideal nanopolymer and it doesn’t cause any cytotoxic effect in normal endothelial cells. It also decreased the lipopolysaccharides induced inflammation through the down-regulation of NFκB and MAP/JNK signaling molecule expressions. Following in vivo results confirmed the synthesized nanoformulation effectively decreased the hyperchlostremia, inflammation and vasoconstriction, which induced over high fat diet. The results of histopathological analysis of cardiac tissues also confirmed the cardioprotective role of synthesized nanoformulation. Overall, both the in vitro and in vivo studies authentically proven the Betulinic acid loaded PVA/Lig-g-MA nanoformulation would be a potent cost effective anti-atherosclerotic nanodrug.     

Antibacterial Activity of a Novel Oligosaccharide from Streptomyces californics against Erwinia carotovora subsp. Carotovora

The present study aims to characterize and predict models for antibacterial activity of a novel oligosaccharide from Streptomyces californics against Erwinia carotovora subsp. carotovora using an adaptive neuro-fuzzy inference system and an artificial neural network. The mathematical predication models were used to determine the optimal conditions to produce oligosaccharide and determine the relationship between the factors (pH, temperature, and time). The characteristics of the purified antibacterial agent were determined using ultraviolet spectroscopy (UV/Vis), infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (¹H- and ¹³C-NMR), and mass spectrometry (MS). The best performances for the model were 39.45 and 35.16 recorded at epoch 1 for E. carotovora Erw₅ and E. carotovora EMCC 1687, respectively. The coefficient (R²) of the training was more than 0.90. The highest antimicrobial production was recorded after 9 days at 25 °C and a pH of 6.2, at which more than 17 mm of the inhibition zone was obtained. The mass spectrum of antimicrobial agent (peak at R.T. = 3.433 of fraction 6) recorded two molecular ion peaks at m/z = 703.70 and m/z = 338.30, corresponding to molecular weights of 703.70 and 338.30 g/mol, respectively. The two molecular ion peaks matched well with the molecular formulas C₂₉H₅₃NO₁₈ and C₁₄H₂₆O₉, respectively, which were obtained from the elemental analysis result. A novel oligosaccharide from Streptomyces californics with potential activity against E. carotovora EMCC 1687 and E. carotovora Erw₅ was successfully isolated, purified, and characterized.     

GpdA-promoter-controlled production of glucose oxidase by recombinant aspergillus niger using nonglucose carbon sources

The gpdA-promoter-controlled exocellular production of glucose oxidase (GOD) by recombinant Aspergillus niger NRRL-3 (GOD3-18) during growth on glucose and nonglucose carbon sources was investigated. Screening of various carbon substrates in shake-flask cultures revealed that exocellular GOD activities were not only obtained on glucose but also during growth on mannose, fructose, and xylose. The performance of A. niger NRRL-3 (GOD3-18) using glucose, fructose, or xylose as carbon substrate was compared in more detail in bioreactor cultures. These studies revealed that gpdA-promoter-controlled GOD synthesis was strictly coupled to cell growth. The gpdA-promoter was most active during growth on glucose. However, the unfavorable rapid GOD-catalyzed transformation of glucose into gluconic acid, a carbon source not supporting further cell growth and GOD production, resulted in low biomass yields and, therefore, reduced the advantageous properties of glucose. The total (endo- and exocellular) specific GOD activities were lowest when growth occurred on fructose (only a third of the activity that was obtained on glucose), whereas utilization of xylose resulted in total specific GOD activities nearly as high as reached during growth on glucose. Also, the portion of GOD excreted into the culture fluid reached similar high levels (≅ 90%) by using either glucose or xylose as substrate, whereas growth on fructose resulted in a more pelleted morphology with more than half the total GOD activity retained in the fungal biomass. Finally, growth on xylose resulted in the highest biomass yield and, consequently, the highest total volumetric GOD activity. These results show that xylose is the most favorable carbon substrate for gpdA-promoter-controlled production of exocellular GOD.     

Aero-thermo-mechanical characteristics of imperfect shape memory alloy hybrid composite panels

A nonlinear finite element model is provided to predict the static aero-thermal deflection and the vibration behavior of geometrically imperfect shape memory alloy hybrid composite panels under the combined effect of thermal and aerodynamic loads. The nonlinear governing equations are obtained using Marguerre curved plate theory and the principle of virtual work taking into account the temperature-dependence of material properties. The effect of large deflection is included in the formulation through the von Karman nonlinear strain-displacement relations. The thermal load is assumed to be a steady-state constant-temperature distribution, whereas the aerodynamic pressure is modeled using the quasi-steady first-order piston theory. The Newton-Raphson iteration method is employed to obtain the nonlinear aero-thermal deflections, while an eigenvalue problem is solved at each temperature step and static aerodynamic load to predict the free vibration frequencies about the deflected equilibrium position. Finally, the nonlinear deflection and free vibration characteristics of a composite panel are presented, illustrating the effects of geometric imperfection, temperature rise, aerodynamic pressure, boundary conditions and shape memory alloy fiber embeddings on the panel response.     

Ultrasonic characterization of heavy metal TeO2–WO3–PbO glasses below room temperature

The longitudinal ultrasonic attenuation measurements have been made using pulse echo method at fundamental frequencies of 2, 4, 6 and 8 MHz in 20WO₃–(80−x) TeO₂–xPbO ternary tellurite glasses (x=10, 12.5, 15, 17.5 and 20 mol%) in the temperature range 160–280 K. The results showed the presence of a broad peak which shifts to higher temperature with increasing frequency. The ultrasonic attenuation peaks suggest that the experimental behavior is controlled by thermally activated structural relaxations. The internal friction, acoustic activation energy, deformation potential, relaxation strength, number of loss centers and density of state have been calculated both as a function of temperature and PbO content. The acoustic activation energy was found to decrease from 0.156 to 0.135 eV with the increase of PbO content. The results showed that both the number of loss centers and their activation energy decrease with the atomic ring size. An increase in the density of state is observed with addition of PbO content at the same frequency in the whole range of temperature which is associated with structural units formed when PbO is added.     

LC Simultaneous Determination of Thioctic Acid, Benfotiamine and Cyanocobalamin in Thiotacid Compound Capsules

A simple, selective, sensitive, precise, simultaneous liquid chromatographic analysis of capsules containing thioctic acid, benfotiamine and cyanocobalamin was described. Good chromatographic separation was achieved using a Zorbax C18 (4.6 cm × 250 mm, 5 μm) and a mobile phase consisting of acetonitrile–phosphate buffer pH 3.5 (15:85, v/v) at a flow rate of 0.9 mL min^?1. The ultraviolet detector was set a wavelength of 280 nm. Thioctic acid, benfotiamine and cyanocobalamin were eluted at 2.869, 3.752 and 13.689 min, respectively. The linear ranges for thioctic acid, benfotiamine and cyanocobalamin were 30–180, 4–24 and 0.025–0.150 μg mL^?1, respectively. The recoveries of thioctic acid, benfotiamine and cyanocobalamine in pharmaceutical preparation were all greater than 98% and their relative standard deviations were less than 2.0%. The limits of detection were 2.57, 0.19 and 0.003 μg mL^?1 for thioctic acid, benfotiamine and cyanocobalamin, respectively.     

Iron,copper and zinc ammonium-1-hydroxyalkylidene-diphosphonates with zero-, one- and two-dimensional covalent metal–ligand structures extended into three-dimensional supramolecular networks by charge-assisted hydrogen-bonding

Hydrothermal synthesis with MCl₂ (M = Fe, Cu, and Zn) and disodium 5-ammonium-1-hydroxypentylidene-1,1-bisphosphonate, (Na⁺)₂[⁺H₃N(CH₂)₄C(OH)(PO₃²⁻)(PO₃H⁻)] (Na₂HAC₅OHP₂) or sodium 3-ammonium-1-hydroxypropylidene-1,1-bisphosphonate hydrate, Na⁺[⁺H₃N(CH₂)₂C(OH)(PO₃H^–)(PO₃H^–)]·H₂O (NaH₂PAM·H₂O) the sodium salt of pamidronic acid, H₃PAM) yielded the one-dimensional (1D) iron, molecular copper and two-dimensional (2D) zinc compounds 1D-{[Fe(μ₃-η⁵-HAC₅OHP₂)]·H₂O}, 1, [Cu(η²-H₂AC₅OHP₂)₂], 2, 2D-{[Zn₂(μ₅-η⁷-AC₅OHP₂)Cl], 3, and 2D-{[Zn(μ₂-η³-H₂PAM)₂], 4, respectively. The bisphosphonate ligand bridges (μ_n) between 2–5 metal atoms and uses 2–7 oxygen donor atoms towards metal coordination (ηⁿ). The zwitterionic nature of the now bis- or tetrakis-deprotonated ammonium–bisphosphonate is retained in the metal complexes. From the reaction of NiCl₂ and Na₂HAC₅OHP₂ the zwitterionic 5-ammonium-1-hydroxypentylidene-1-phosphonic acid, ⁺H₃N(CH₂)₄CH(OH)PO₃H⁻, 5 was obtained as a product of the ligand P–C bond hydrolysis. Adjacent strands, molecules or layers in 1–4, respectively are organized through the Coulomb attraction between the positive ammonium group and the negative phosphonate groups, supported by hydrogen-bonding. Each protic H atom on the C–OH, NH₃⁺ and –PO₃H⁻ group is involved in charge-assisted hydrogen-bonding. The ammonium-pentylidene groups act as hydrophobic separators between the hydrophilic units with the polar M{C(OH)(PO₃)₂} and {NH₃} units. Bond valence sum calculations support the Fe(II) oxidation state in 1, which was experimentally determined from a quantitative polarographic Fe(II)/Fe(III) speciation analysis as well as a temperature variable magnetic study.     

Determination of antihypertensive mixtures by use of a chemometrics-assisted spectrophotometric method

A simple multivariate calibration method for analysis of two types of hypotensive mixture is described. The mixtures are composed of chlorthalidone with atenolol or chlorthalidone with both amiloride hydrochloride and atenolol. The components of the mixtures result in substantial spectral overlap—between 87.5 and 91.0%. Resolution of the mixtures under investigation has been accomplished mainly by using CLS and PCR methods. The components in each mixture have been simultaneously determined in three commercial dosage forms with high accuracy and without interference from commonly encountered excipients and additives. Good recoveries were obtained with both synthetic mixtures and commercial tablets. The results obtained were compared with those from pharmacopeial methods and found to be in good agreement. The results obtained from CLS and PCR were also compared with those obtained from a ¹D spectrophotometric method.