Crystallographically-oriented single-crystalline copper nanowire arrays electrochemically grown into nanoporous anodic alumina templates

Highly crystallographically-oriented single-crystalline copper nanowire arrays were electrochemically deposited into nanoporous commercial alumina templates. A gold/copper backward contact was needed in the template, while the nanowires were grown from a 0.5 M CuSO₄·5H₂O solution adjusted to pH=1. The kinetics of the growing process is studied by means of current vs. time curves. The pore filling is between 80 to 90%. The structure and morphology of the wires are studied by XRD, SEM and TEM. The wires have an average diameter of 150 nm corresponding to the pore diameter of the template, with the cubic face-centered copper structure. This structure is highly oriented along the [100] direction parallel to the wire axis. The preferential growing along this direction was not previously found in the literature, which may have interesting applications when such direction is required. PACS 81.05.Bx; 82.45.Qr; 81.07.-b     

The applicability of DTA and DSC techniques to the study of the kinetics of phase transition reactions

Differential thermal analysis and differential scanning calorimetry techniques have been used to study the kinetics of phase transitions. The aragonite/calcite transformation was chosen as test reaction.Marked discrepancies were observed between the DTA kinetic results and those obtained from isothermal kinetic measurements. This disagreement is associated with the difficulty of determining accurately the reaction rate of the process from a DTA curve.In contrast, in DSC measurements, where the reaction rate is given by the height of the peak from the base-line, it is possible to get a satisfactory fit of the data, and the kinetic results obtained with this technique are in good agreement with the isothermal ones.

---

Zusammenfassung Die Differentialthermoanalyse und DSC wurden zur Untersuchung der Kinetik von Phasenübergängen eingesetzt. Die Umwandlung Aragonit/Calcit wurde als Testreaktion gewählt.Bedeutende Diskrepanzen wurden zwischen den kinetischen Ergebnissen der DTA und den durch isotherme kinetische Messungen erhaltenen Ergebnissen beobachtet. Diese Abweichungen sind damit verbunden, daß es schwierig ist, die Reaktionsgeschwindigkeit des Vorgangs aus einer DTA-Kurve genau zu ermitteln.Bei DSC-Messungen,wo die Reaktionsgeschwindigkeit durch die Höhe des Peaks von der Grundlinie gegeben ist, kann eine befriedigende Anpassung der Daten erhalten werden, und die durch diese Technik erhaltenen kinetischen Ergebnisse sind in guter Übereinstimmung mit den isothermen Ergebnissen.

---

. /. , . -. , , , , , .

     

Nuclear-related analytical techniques: Literature retrieval from the INIS database

The applicability of the INIS database for literature retrieval on nuclear-related analytical techniques [e.g. neutron activation analysis (NAA), X-ray fluorescence (XRF), particle-induced X-ray emission (PIXE)] has been studied. There exist about 9700 documents on NAA and other forms of activation analysis, about 3500 documents on XRF and about 1200 documents on PIXE in the database collected from 1976 until July 1988. They cover a variety of elements and matrices in the fields of biology, geochemistry and the physical sciences. Some technical notes and comments on the practical use of this database are also included.     

Dual-purpose gas chromatographic injection device for pressurized liquid and gas injection

A dual-purpose gas chromatographic injection device, capable of injecting pressurized liquid sample of up to 5000 psig and gas sample with a volume as high as 5000 μL, has been successfully developed and implemented. The injection device is synergized by the effectiveness of a classical flash vaporization of a syringe injection and the reliability of a proven rotary valve. Depending on the matrix involved, this injection device employs either a commercially available four-port internal valve for liquid sampling or a six-port external valve for gas sampling, a modified removable needle used in standard liquid syringe, and an auxiliary flow stream that can be either mechanical or electronic flow controlled for solute transfer. For pressurized liquid, the device was found suitable of up to nC₁₆ hydrocarbon with no observable carry-over despite the injection device was operating at ambient temperature. A relative standard deviation of less than 2% (n = 20) was obtained for hydrocarbon compounds ranging from nC₈ to nC₁₆. For gas injection, the device performed well even under difficult chromatographic conditions such as with a low column inlet pressure of less than 1 psig. A relative standard deviation of less than 0.5% (n = 10) was obtained for reactive sulfur compounds such as alkyl mercaptans. The device can be operated manually or automated with pneumatic or electrical actuator, is platform neutral, and can be moved amongst instruments without hardware modification as well as implemented for on-line or in situ applications. In this paper, the utility of the device was also demonstrated with selected GC applications of industrial significance.     

Novel KF-TiO2catalysts for oxidative dehydrogenation of isobutane

A novel type of catalysts, KF-TiO₂, efficient for the oxidative dehydrogenation (ODH) of isobutane is presented. The effect of KF content and calcination temperature was studied. In the reaction conditions explored, the best performance (73 % selectivity to isobutene at 10.5 % conversion of isobutane) was observed over a catalyst with KF/TiO₂ = 0.2 (mol/mol). The surface properties of the catalysts were investigated by SPS (Surface Photo-voltage Spectroscopy) and XPS. The promotion effect of KF in the catalysts can be attributed to the formation of an oxyfluoro-compound, K₂Ti₄O₈F₂.     

A new controlled release system of chlorhexidine and chlorhexidine:βcd inclusion compounds based on porous silica

The purpose of this study was to prepare and characterize a controlled release system based on porous silica loaded with chlorhexidine (Cx) and its inclusion compounds in β-cyclodextrin (βcd), and to evaluate its antimicrobial activity. Acetate chlorhexidine (CxA), gluconate chlorhexidine (CxG), βcd:chlorhexidine acetate 2:1 (βcd:CxA) and βcd:chlorhexidine gluconate 2:1 (βcd:CxG) were incorporated into porous silica. Drug loading was characterized by FTIR, powder X-ray diffraction, thermal analysis and BET, and was shown to be in an amorphous state and porous matrix. The kinetics release parameter of the drug was established, which showed that the Cx systems release profile followed zero order release until 400 h and Higuchi model release until 750 h, after the burst effect at the first 8 h. Chlorhexidine therapeutic range was reached near first hour for all systems. The chlorhexidine porous silica system was biologically active against Enterococcus faecalis and Candida albicans in vitro. The systems showed an efficient Cx controlled release modulated by the presence of the β-cyclodextrin and by the porous silica matrices, providing effective antimicrobial activity.     

On-line multidimensional chromatography using packed capillary liquid chromatography and capillary gas chromatography

The introduction of selected fractions from a liquid chromatograph into a gas chromatograph has been described; however, analyses were performed by off-line experiments requiring collection and reinjection of the separate fractions or by on-line procedures where disadvantageously, only a fraction of the separated peak or a well resolved component in a mixture could be introduced into a gas chromatograph. This disadvantage is overcome by the apparatus and method described in this paper, which utilizes a multidimensional chromatography system employing a high efficiency, packed capillary LC column coupled on-line to a capillary gas chromatograph. The liquid chromatograph (so designed) can act as a highly efficient clean-up or chemical class fractionation step prior to introduction into the gas chromatograph, significantly reducing sample preparation times in many applications. Thus minor components in a complex matrix can be determined without prior sample clean-up, an example of which is the determination of polychlorinated biphenyls in a complex hydrocarbon matrix.     

Engineering reactions in crystalline solids: predicting photochemical decarbonylation from calculated thermochemical parameters

A detailed thermochemical analysis of the alpha-cleavage and decarbonylation reactions of acetone and several ketodiesters was carried out with the B3LYP/6-31G* density functional method. The heats of formation of several ground-state ketones and radicals were calculated at 298 K to determine bond dissociation energies (BDE) and radical stabilization energies (RSE) as a function of substituents. Results show that the radical-stabilizing abilities of the ketone substituents play a very important role on the thermodynamics of the alpha-cleavage and decarbonylation steps. An excellent correlation between calculated values and previous experimental observations suggests that photochemical alpha-cleavage and decarbonylation in crystals should be predictable from knowledge of excitation energies and the RSE of the substituent.     

Resistively heated temperature programmable silicon micromachined gas chromatography with differential mobility spectrometry

A microfabricated electromechanical system based on radio frequency modulated ion mobility spectrometry (MEMS-RFIMS), also known as differential ion mobility spectrometry (DMS) has been successfully interfaced to a custom-fabricated resistively heated temperature programmable micromachined gas chromatograph. In contrast to a conventional time-of-flight ion mobility spectrometer, the DMS uses the non-linear mobility dependence in strong radio frequency electric fields for ion filtering. Selective and sensitive detection of targeted analytes of interest can be achieved by using different transport gases, radio frequencies, and associated compensation voltages. In addition, the detection of both positive and negative ions, depending on the ionization mechanism favorable to the analytes involved is achieved. When compared to a stand-alone GC with a non spectrometric detector or a stand-alone DMS, GC-DMS as a hyphenated technique offers two competitive advantages; two orthogonal separating methods in a single analytical system and the resolving power of gas chromatography to minimize charge exchange in the ionization chamber of the detector. In this article, a portable, resistively heated temperature programmable silicon machined gas chromatograph with differential mobility detection is introduced. The performance of the instrument is illustrated with examples of difficult industrial applications.