Quantification of antimony depth profiles in Sb-doped tin dioxide thin films

Sb-doped SnO(2) thin films, deposited by atomic layer epitaxy (ALE) for gas sensor applications, have been characterized by secondary ion mass spectrometry (SIMS). Quantification of the depth profile data has been carried out by preparing a series of ion implanted standards. Average concentrations determined by SIMS have been compared with Sb/Sn ratios obtained by X-ray fluorescence (XRF) spectrometry and proton induced X-ray emission (PIXE) spectrometry and have been found to be in good agreement. However, a detection limit of 5x10(18) at cm(-3) could only be obtained because of mass interferences. SIMS data show that the ALE technique can be used to produce a controllable growth and doping of thin films.     

Separation and determination of metals as complexes of 1-nitroso-2-naphthol-6-sulphonic and 2-nitroso-1-naphthol-6-sulphonic acids

A sensitive ion-pair liquid-liquid extraction-spectrophotometric method has been developed for the determination of copper, palladium, iron and cobalt, based on the formation of metal complexes with 1-nitroso-2-naphthol-6-sulphonic acid or 2-nitroso-1-naphthol-6-sulphonic acid as primary ligand, and zephiramine as counter-ion. The coloured metal complexes obtained over different pH ranges are easily and quantitatively extracted into dichloromethane. The method has been tested with samples containing known amounts of copper, palladium, iron and cobalt in ultrapure water. The reagents provide a sensitive spectrophotometric method for determining these metals.     

Characteristics and safety of nano-sized cellulose fibrils

A finely ground fibrillated cellulose was fractionated into separate size fractions. The characteristics of the smallest size fractions were studied, and the toxicity to humans was tested as part of a safety assessment. Morphological studies performed with state-of-the-art methods, such as scanning electron microscopy and atomic force microscopy, showed that the fraction obtained consisted of long thin fibrils but also larger fibril agglomerates, and spherical particles were present. The finest fraction did not show any sub-lethal effects as assessed by RNA inhibition test in vitro, nor were there any indications of genotoxicity as tested by the Ames test in vitro. Systemic effects tested in vivo with the nematode were also absent. No cytotoxic effects were seen in the highest tolerated dose test in vitro, but some indication of cytotoxicity was observed in the total protein content test in vitro at the highest sample concentration. The significance of this toxicity test result should be addressed in relation to the other toxicity tests, in which no toxicity was observed, with special emphasis on the in vivo test. Given this, the overall toxicity analyses support the conclusion that nano-scale cellulose fibrils can be considered to be safe towards humans. However, the reason for the positive cytotoxicity test result and, in addition, the effect of the biocide used in sample preservation on the toxicity tests need to be clarified before generalizing these results and declaring nanocellulose to be unambiguously safe.     

Determination of the carboxylic acids in acidic and basic process samples by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) with indirect UV detection was used in developing a method for the simultaneous determination of inorganic anions, aliphatic and heterocyclic organic acids in various processed samples. The analytes were determined simultaneously in 10 min using an electrolyte containing 20 mM 2,3-pyrazine dicarboxylic acid, 65 mM tricine, 2 mM BaCl₂, 0.5 mM cetyltrimethylammonium bromide, and 2 M urea at pH 8.06. Linear plots for the analytes were obtained in the concentration range of 2–150 mg L⁻¹. Relative standard deviations (RSDs) of peak areas during a 3-day analysis period varied from 5.5% for glycolate to 9.5% for oxalate. RSDs of migration times varied between 0.4% and 1.1%. The detection limit (at S/N 3) was 1 mg L⁻¹ for all the analytes studied. The proposed method was successfully demonstrated for the determination of carboxylic acids in eight oxygen treated samples of commercial softwood and hardwood kraft lignin and two red wine samples of Pinot Noir grapes. In the kraft lignin samples the concentrations of carboxylic acids correspond to the oxidation time. The acid concentrations of wine varied considerable.     

聚全氟丙醚油微观结构的研究

聚全氟丙醚油是一种新型的性能独特的润滑油。本实验采用~（１９）Ｆ－ＮＭＲ波谱法，结合~１Ｈ－ＮＭＲ和ＭＳ法，较详细地研究了油品微观结构。由谱线的化学位移和强度归纳出不同链节结构的分布，同时阐明了端基结构。     

Electrocatalytic oxidation of the antiviral drug acyclovir on a copper nanoparticles-modified carbon paste electrode

The electrocatalytic oxidation of acyclovir (Zovirax) on two different copper-based electrodes: copper microparticles- and copper nanoparticles-modified carbon paste electrodes (denoted as micro-CPE and nano-CPE, respectively) was voltammetrically investigated. In the voltammogram recorded using micro-CPE, a single anodic oxidation peak appeared, while nano-CPE resulted in two overlapped anodic peaks. The anodic currents were related to the electrocatalytic oxidation of acyclovir via the electrogenerated active species of Cu(III) with an EC’ mechanism. Acyclovir was oxidized with higher rates at low potentials on nano-CPE compared to micro-CPE. This was related to the nanosize effect of copper nanoparticles. The constants of the electrocatalytic oxidation process and the diffusion coefficient of acyclovir were reported. A sensitive and time-saving determination procedure was developed for the analysis of acyclovir and the corresponding analytical parameters were reported. The proposed amperometric method was applied to the analysis of commercial pharmaceutical products (tablets and topical cream) and the results were in good agreement with the declared values.     

Oxidation and determination of Gabapentin on nanotubes of nickel oxide-modified carbon paste electrode

The electrooxidation of Gabapentin was studied on nanotubes of nickel oxide-modified carbon paste electrode for the first time. Cyclic voltammetry was employed to investigate the electrooxidation process. A simple, sensitive, and efficient amperometric method was developed for the analysis of the drug, and the corresponding analytical parameters were reported. For Gabapentin, a detection limit of 0.3 μM was obtained in a linear range of 2.4–50 μM. The proposed amperometric method was also applied to the analysis of commercial capsules, and the results were in good agreement with the declared values. Also, the applicability of the method to the direct assay of the drug in human serum and urine was described.     

Microwave-assisted selective protection of glutaraldehyde and its symmetrical derivatives as monoacetals and -thioacetals

Six monoprotected acetals and -thioacetals of glutaradehyde and its symmetrical dimethyl derivatives were synthesized. Microwave-assisted heating proved to be a substantially more selective method for monoprotection than conventional heating. All reactions were efficient and only traces of diprotected material were formed.     

Electrooxidation of dextromethorphan on a carbon nanotube–carbon microparticle–ionic liquid composite: applied to determination in pharmaceutical forms

The electrooxidation of dextromethorphan on a composite constructed with carbon nanotube–ionic liquid–carbon microparticles was investigated by cyclic voltammetry in a 100 mM phosphate buffer solution, pH 7.40. In the voltammograms, an irreversible diffusion-controlled anodic peak appeared. The diffusion coefficient of dextromethorphan, the electron-transfer coefficient, and the standard rate constant of the electrooxidation process were found to be 3.45?×?10^?6 cm² s^?1, 0.65, and 1.67?×?10^?3 cm s^?1, respectively. A sensitive and timesaving determination procedure was developed for the analysis of dextromethorphan, and the corresponding analytical parameters were reported. Using this method, dextromethorphan was determined with an LOD and LOQ of 8.81 and 29.36 μM in a linear range of 2.5?×?10^?4 to 3.3?×?10^?3 M, respectively. The proposed amperometric method was successfully applied to the analysis of commercial pharmaceutical products (syrup and oral drop), and the results were in good agreement with the declared values.     

The equivalence between pointwise Hardy inequalities and uniform fatness

We prove an equivalence result between the validity of a pointwise Hardy inequality in a domain and uniform capacity density of the complement. This result is new even in Euclidean spaces, but our methods apply in general metric spaces as well. We also present a new transparent proof for the fact that uniform capacity density implies the classical integral version of the Hardy inequality in the setting of metric spaces. In addition, we consider the relations between the above concepts and certain Hausdorff content conditions.