A nucleophilic substitution reaction in microemulsions based on either an alcohol ethoxylate or a sugar surfactant

A nucleophilic substitution reaction between 4-tert-butylbenzyl bromide and a series of iodide salts has been performed in oil-in-water microemulsions based on either a fatty alcohol ethoxylate or a sugar surfactant. The reaction kinetics was compared with the kinetics of the same reaction performed in a microhomogeneous reaction medium, d-MeOH. Previous results showing a particularly high reactivity in the microemulsion based on the fatty alcohol ethoxylate was confirmed. It was shown that in both microemulsions the reaction rate was almost independent of the choice of counterion to iodide. This indicates that complexation of the cation with the surfactant headgroup, which, in particular, could have taken place with surfactants containing oligooxyethylene chains (a “crown ether effect”), seems not to be of importance.

¹²⁷I NMR studies, as well as quadrupole splitting experiments performed by ²H NMR, indicate that there is a certain accumulation of iodide at the oil–water interface of the microemulsions. It is difficult to draw any quantitative conclusions in this respect, however.

The results obtained in this study, combined with results from previous investigations of the same reaction, indicate that the unexpectedly high reactivity obtained in the microemulsion based on a surfactant containing an oligooxyethylene headgroup is most probably due to the nucleophile being poorly solvated when present in the headgroup layer of such a microemulsion. Poorly solvated anions are known to be highly reactive nucleophiles.     

Pure-silica optical waveguides, fiber couplers, and high-aspect ratio submicrometer channels for electrokinetic separation devices

A new fabrication procedure for integration of ultraviolet transparent pure-silica planar waveguides, fiber couplers and high-aspect ratio submicrometer channels is presented. Only a single photolithographic mask step is required. The channels are 80-90 microm deep and the width can be reduced to about 0.5 microm, corresponding to a height-to-width ratio of more than 150. The core of the waveguides consists of pure silicon dioxide, which is favorable over doped silica, due to the absence of absorption centers associated with the dopants. This furthermore improves the long-term stability of the waveguides, because of an increased radiation resistance of the glass. The propagation loss decreases from 1.0 dB/cm at 200 nm to 0.2 dB/cm at 800 nm, which, to our knowledge, is the lowest propagation loss reported for integrated planar waveguides in the ultraviolet wavelength region to date. The effective optical path length is 1.2 mm for an absorbance cell with a nominal length of 1.0 mm, indicating effective suppression of stray light. The limit of detection for paracetamol when present in the entire channel network was determined to 3 microg/mL. Finally, the applicability of the fabricated devices for capillary electrophoresis was evaluated by separation of caffein, paracetamol and ketoprofone using absorbance detection at 254 nm.     

Superpositioned dielectrophoresis for enhanced trapping efficiency

One of the major applications for dielectrophoresis is selective trapping and fractionation of particles. If the surrounding medium is of low conductivity, the trapping force is high, but if the conductivity increases, the attraction decreases and may even become negative. However, high-conductivity media are essential when working with biological material such as living cells. In this paper, some basic calculations have been performed, and a model has been developed which employs both positive and negative dielectrophoresis in a channel with interdigitated electrodes. The finite element method was utilized to predict the trajectories of Escherichia coli bacteria in the superpositioned electrical fields. It is shown that a drastic improvement of trapping efficiency can be obtained in this way, when a high conductivity medium is employed.     

Controlled Double-Bond Migration in Palladium-Catalyzed Intramolecular Arylation of Enamidines

Palladium-catalyzed intramolecular cyclization of N-(N'-tert-butylformimidoyl)-6-[2-(2-iodophenyl)ethyl]-1,2,3,4-tetrahydropyridine (1a) and N-(N'-tert-butylformimidoyl)-6-[3-(2-iodophenyl)propyl]-1,2,3,4-tetrahydropyridine (1b) respectively results in formation of spiro compounds 1'-(N-tert-butylformimidoyl)-3',4'-dihydrospiro[indan-1,2'(1'H)-pyridine] (4a), 1'-(N-tert-butylformimidoyl)-1',6'-dihydrospiro[indan-1,2'(3'H)-pyridine] (5a), and 1'-(N-tert-butylformimidoyl)-5',6'-dihydrospiro[indan-1,2'(1'H)-pyridine] (6a) and 1'-(N-tert-butylformimidoyl)-3,3',4,4'-tetrahydrospiro[naphthalene-1(2H),2'(1'H)-pyridine] (4b), 1'-(N-tert-butylformimidoyl)-1',3,4,6'-tetrahydrospiro[naphthalene-1(2H),2'(3'H)-pyridine] (5b), and 1'-(N-tert-butylformimidoyl)-3,4,5',6'-tetrahydrospiro[naphthalene-1(2H),2'(1'H)-pyridine] (6b). The double-bond migration process can be controlled, and any of the three double-bond isomers can be prepared by employing proper ligands. A combination of BINAP and the amidine function was required to obtain the isomers 5a and 5b with the double bond in the homoallylic position relative to the aryl group. An electrospray ionization mass spectrometric study was conducted to support suggested reaction intermediates.     

Mass spectral fragmentation patterns of heterocycles. VI. Carbazole and 1,8-dideuteriocarbazole

The mass spectral fragmentation of carbazole was reinvestigated using metastable ion studies, exact mass measurements and 1,8-dideuteriocarbazole. 1,8-Dideuteriocarbazole was prepared by successive metalations and deuterations of carbazole. The ¹H- and ¹³C-nmr spectra of 1,8-dideuteriocarbazole confirmed earlier assignments for carbazole.     

Micelle-sequestered dissociation of cationic DNA-intercalated drugs: unexpected surfactant-induced rate enhancement

Detergent sequestration using micelles as a hydrophobic sink for dissociated drug molecules is an established technique for determination of dissociation rates. The anionic surfactant molecules are generally assumed not to interact with the anionic DNA and thereby not to affect the rate of dissociation. By contrast, we here demonstrate that the surfactant molecules sodium dodecyl sulfate (SDS), sodium decyl sulfate, and sodium octyl sulfate all induce substantial rate enhancements of the dissociation of intercalators from DNA. Four different cationic DNA intercalators are studied with respect to surfactant-induced dissociation. Except for the smallest intercalator, ethidium, the dissociation rate constants increase monotonically with surfactant concentration both below cmc and (more strongly) above cmc, much more than expected from electrostatic effects of increased counterion concentration. The rate enhancement, most pronounced for the bulky, multicationic, hydrophobic DNA ligands in this study, indicates a reduction of the activation energy for the ligand to pass out from a deeply penetrating intercalation site of DNA. The discovery that surfactants enhance the rate of dissociation of cationic DNA-intercalators implies that rate constants previously determined by micelle-sequestered dissociation may have been overestimated. As an alternative, more reliable method, we suggest instead the addition of excess of dummy DNA as an absorbent for dissociated ligand.     

Stereoselective synthesis of optically active bicyclic beta-lactam carboxylic acids that target pilus biogenesis in pathogenic bacteria

Optically active bicyclic beta-lactams were synthesized, starting from 2-H-delta 2-thiazolines and Meldrum's acid derivatives. Several methods to accomplish an ester hydrolysis without damaging the beta-lactam framework were investigated. A rapid CsOH saponification of the beta-lactam methyl esters was developed and protonation of the Cs-carboxylates by Amberlite (IR-120 H+) afforded a series of bicyclic beta-lactam carboxylic acids. Moreover, a convenient method for the synthesis of 2-H-delta 2-thiazolinecarboxylic acid methyl ester 2 was developed. Bicyclic beta-lactam carboxylic acids 7a-g and aldehydes 4a-d were screened for their affinity to the bacterial periplasmic chaperone PapD using a surface plasmon resonance technique. beta-Lactams substituted with large acyl substitutents showed better binding to the chaperone than the native C-terminal peptide PapG 8, demonstrating that bicyclic beta-lactams constitute a new class of potential bacterial chaperone inhibitors.     

Dimethylformamide as a carbon monoxide source in fast palladium-catalyzed aminocarbonylations of aryl bromides

Dimethylformamide (DMF) acts as an efficient source of carbon monoxide and dimethylamine in the palladium-catalyzed aminocarbonylation (Heck carbonylation) of p-tolyl bromide to provide the dimethylamide. Addition of amines to the reaction mixture in excess delivers the corresponding aryl amides in good yields. The amines employed, benzylamine, morpholine, and aniline, all constitute good reaction partners. The reaction proceeds smoothly with bromobenzene and more electron-rich aryl bromides, but electron-deficient aryl bromides fail to undergo aminocarbonylation. The reactions are conducted at 180-190 degrees C for 15-20 min with microwave heating in a reaction mixture containing imidazole and potassium tert-butoxide: the latter is required to promote decomposition of the DMF solvent at a suitable rate. The beneficial effects of controlled microwave irradiation as an energy source for the rapid heating of the carbonylation reaction mixture are demonstrated. The carbonylation procedure reported herein, which relies on the in situ generation of carbon monoxide, serves as a convenient alternative to other carbonylation methods and is particularly applicable to small-scale reactions where short reaction times are desired and the direct use of carbon monoxide gas is impractical.     

Particle-induced phase separation in mixed polymer solutions

The influence of added colloidal particles on the phase separation of mixed aqueous polymer solutions is investigated. Two types of particles (polystyrene latex or silica) and different combinations of segregating polymers (dextran of varying molar mass combined with poly(ethylene oxide) (PEO) of varying molar mass, or Ucon, a copolymer of ethylene oxide and propylene oxide) were used. All systems displayed particle-induced instability effects, but the extent of the effect varied strongly between the various combinations and with the amount of added salt. Very large instability effects were seen in certain mixtures. Two mechanisms, both relying on the adsorption of at least one of the polymers to the particle surface, seem to operate. Close to the cloud-point curve of the particle-free polymer1/polymer2/water mixture, adsorption of PEO or Ucon to the particles gives rise to a capillary-induced phase separation. Close to the dextran/water axis of the phase diagram, the adsorbing polymer gives rise to a surface modification of the particles, which then interacts repulsively with the surrounding dextran solution.