Excess isentropic compressibility and speed of sound of the ternary mixture 2-propanol + diethyl ether + n-hexane and the constituent binary mixtures at 298.15 K

Speed of sound and densities of the ternary mixture 2-propanol + diethyl ether + n-hexane and also the binary mixtures 2-propanol + diethyl ether and 2-propanol + n-hexane have been measured at the entire composition range at 298.15 K. The excess isentropic compressibilities and the excess speed of the sound have been calculated from experimental densities and speed of sound. These excess properties of the binary mixtures were fitted to Redlich-Kister equation, while the Cibulka’s equation was used to fit the values related to the values to the ternary system. These excess properties have been used to discuss the presence of significant interactions between the component molecules in the binary mixtures and also the ternary mixtures. Speed of sound of the binary mixtures and the ternary mixture have been compared with calculated values from free length theory (FLT), collision factor theory (CFT), Nomoto’s relation (NR), Van Deal’s ideal mixing relation (IMR) and Junjie’s relation (JR). The results are used to compare the relative merits of these theories and relations in terms of the root mean square deviation relative (RMSD_r).     

A new approach for fluorine determination by solid sampling graphite furnace molecular absorption spectrometry

This work deals with the determination of fluorine by solid sampling graphite furnace molecular absorption spectrometry. The molecular absorbance of aluminum monofluoride (AlF), which is produced in the vapor phase in the presence of Al³⁺, is measured at 227.5 nm, a non-resonant platinum line. A conventional graphite furnace program has been used with pyrolysis and vaporization temperatures of 800 and 2300 °C, respectively. Solutions of Ba²⁺ and Al³⁺ have been used to avoid fluorine losses during the pyrolysis stage and to produce AlF in the vaporization stage, respectively. Certified coal and alumina samples were analyzed using aqueous standards for calibration. The agreement between the found concentration and the certified value, or the value obtained by another method ranged from 92 to 105%, with a relative standard deviation less than 8.5%. The limit of detection and the characteristic mass was 0.17 μg g^− 1 and 205 pg, respectively.     

Essential Oil and Antimicrobial Evaluation of the Pistacia eurycarpa

The compositions of microdistilled and hydrodistilled essential oils of the mastix ofPistacia eurycarpaYalt. (Anacardiaceae) were compared. The essential oils were analyzed by GC/MS:- andbeta;-pinenes were found as the major constituents. The antimicrobial activity of the hydrodistilled oil was determined due to the ethnomedical uses of the oleo-gum resin on skin diseases.     

Nanocomposites based on crosslinked polyacrylic latex/silver nanoparticles for waterborne high‐performance antibacterial coatings

Functional polymer/AgNPs nanocomposites have been prepared. Silver nanoparticles (NPs) were synthesized to which polyacrylamide, PAAm, was covalently bound. PAAm was synthesized via a RAFT reaction and carried thiol and carboxylic acid end groups. Thiol was used to bind the polymer to the metal surface and carboxyl for further reactions. The AgNPs were used in a post‐crosslinking reaction with a separately synthesized poly(butyl acrylate‐co‐methyl methacrylate)/polyglycidyl methacrylate core/shell latex bearing epoxy functional groups. Dynamic mechanical analysis showed that the functional AgNPs effectively crosslinked the latex polymer, and that the final product had excellent mechanical strength. Antibacterial tests revealed that the nanocomposite films had strong antibacterial activity against all types of the bacteria and the immobilization of silver NPs by crosslinking retarded the release of silver in comparison to the uncrosslinked ones. With the presented method, it is possible to obtain ductile antibacterial nanocomposites to be used as waterborne functional coatings. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1435–1447     

Versatile light‐responsive organogels: Evaluation of their dye releasing and photoinitiation behaviors

Light‐responsive crosslinked structures were prepared by a straightforward quaternization strategy using chloride functional polystyrene copolymers and commercially available Michler's ketone with varying feed ratios. Resulting organogels demonstrated excellent solvent absorption and their swelling characteristics were altered by UV‐light irradiation. According to scanning electron microscope images, UV‐illuminated samples showed an obvious photodecomposition, which enhanced their solvent uptake capacity with increase of UV exposure. Additionally, release behavior of eosin Y as a model compound was determined by UV–vis and fluorescence spectrometers. Achieved photoactive gels were also employed as the reusable heterogeneous initiators for photoinduced free‐radical polymerization of methyl methacrylate. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1275–1282     

Protecting the data-driven newsvendor against rare events: a correction-term approach

We propose an approach to the data-driven newsvendor problem that incorporates a correction factor to account for rare events, when the decision-maker has few historical data points at his disposal but knows the range of the demand. This mitigates a weakness of pure data-driven methodologies, specifically, the fact that they under-protect the system against tail events, which are in general under-observed in the empirical demand distribution. We test the approach in extensive computational experiments and provide a summary table of the numerical experiments to help the decision maker gain further insights.     

Search of truncation of (N−1) electron basis containing full connected triple excitations in computing main and satellite ionization potentials via Fock‐space coupled cluster approach

A valence‐universal multireference coupled cluster (VUMRCC) theory, realized via the eigenvalue independent partitioning (EIP) route, has been implemented with full inclusion of triples excitations for computing and analyzing the entire main and several satellite peaks in the ionization potential spectra of several molecules. The EIP‐VUMRCC method, unlike the traditional VUMRCC theory, allows divergence‐free homing‐in to satellite roots which would otherwise have been plagued by intruders, and is thus numerically more robust to obtain more efficient and dependable computational schemes allowing more extensive use of the approach. The computed ionization potentials (IPs) as a result of truncation of the (N−1) electron basis manifold involving virtual functions such as 2h‐p and 3h‐2p by different energy thresholds varying from 5 to 15 a.u. with 1 a.u. intervals as well as thresholds such as 20, 25, and 30 a.u. have been carefully looked into. Cutoff at around 25 a.u. turns out to be an optimal threshold. Molecules such as C₂H₄ and C₂H₂ (X = D,T), and N₂ and CO (X = D,T,Q) with Dunning's cc‐pVXZ bases have been investigated to determine all main and 2h‐p shake‐up and 3h‐2p double shake‐up satellite IPs. We believe that the present work will pave the way to a wider application of the method by providing main and satellite IPs for some problematic N‐electron closed shell systems. © 2013 Wiley Periodicals, Inc.     

A structural analysis of ultrathin barrier (In)AlN/GaN heterostructures for GaN-based high-frequency power electronics

Metal–organic chemical vapor deposition (MOCVD) is one of the best growth methods for GaN-based materials as well-known. GaN-based materials with very quality are grown the MOCVD, so we used this growth technique to grow InAlN/GaN and AlN/GaN heterostructures in this study. The structural and surface properties of ultrathin barrier AlN/GaN and InAlN/GaN heterostructures are studied by X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements. Screw, edge, and total dislocation densities for the grown samples have been calculated by using XRD results. The lowest dislocation density is found to be 1.69 × 10⁸ cm⁻² for Sample B with a lattice-matched In_0.17Al_0.83N barrier. The crystal quality of the studied samples is determined using (002) symmetric and (102) asymmetric diffractions of the GaN material. In terms of the surface roughness, although reference sample has a lower value as 0.27 nm of root mean square values (RMS), Sample A with 4-nm AlN barrier layer exhibits the highest rough surface as 1.52 nm of RMS. The structural quality of the studied samples is significantly affected by the barrier layer thickness. The obtained structural properties of the samples are very important for potential applications like high-electron mobility transistors (HEMTs).     

Reversible Dehalogenation in On‐Surface Aryl–Aryl Coupling

In the emerging field of on‐surface synthesis, dehalogenative aryl–aryl coupling is unarguably the most prominent tool for the fabrication of covalently bonded carbon‐based nanomaterials. Despite its importance, the reaction kinetics are still poorly understood. Here we present a comprehensive temperature‐programmed x‐ray photoelectron spectroscopy investigation of reaction kinetics and energetics in the prototypical on‐surface dehalogenative polymerization of 4,4′′‐dibromo‐p‐terphenyl into poly(para‐phenylene) on two coinage metal surfaces, Cu(111) and Au(111). We find clear evidence for reversible dehalogenation on Au(111), which is inhibited on Cu(111) owing to the formation of organometallic intermediates. The incorporation of reversible dehalogenation in the reaction rate equations leads to excellent agreement with experimental data and allows extracting the relevant energy barriers. Our findings deepen the mechanistic understanding and call for its reassessment for surface‐confined aryl–aryl coupling on the most frequently used metal substrates.     

Teucrium polium (L.): Phytochemical Screening and Biological Activities at Different Phenological Stages

The aim of the present study was to investigate the changes in the content of phytochemical compounds and in vitro antioxidant, antibacterial, and anti-inflammatory activities of Teucrium polium L. aerial parts and root methanolic extracts at different phenological stages (vegetative, flowering, and seeding). The T. polium extracts were analyzed using gas chromatography–mass spectrometry (GC-MS), and their antioxidant properties were tested with the 2,2-diphenyl-1-picrylhydrazyl (DPPH), nitric oxide (NO), ferrous ions (Fe²⁺), and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) methods. Forty-nine compounds were identified with the majority of germacrene D, t-cadinol, β-pinene, carvacrol, bicyclogermacrene, α-pinene, and limonene. The results show that the extracts significantly differ between different phenological stages of the plant material used in terms of the phytochemical composition (total phenolic compounds, total flavonoids, total alkaloids, and total saponin contents) and bioactivities (antioxidant, antibacterial, and anti-inflammatory) (p < 0.05). The highest total contents of phenolics (72.4 ± 2.5 mg gallic acid equivalent (GAE)/g dry weight), flavonoids (36.2 ± 3.1 mg quercetin equivalent (QE)/g dry weight), alkaloids (105.7 ± 2.8 mg atropine equivalent (AE)/g dry weight), and saponins (653 ± 6.2 mg escin equivalent (EE)/g dry weight), as well as antioxidant, antibacterial, and anti-inflammatory activities, were measured for the extract of the aerial parts obtained at the flowering stage. The minimum inhibitory concentration (MIC) values for the extracts were varied within 9.4–300 µg/mL, while the minimum bactericidal concentration (MBC) values were varied within 18.75–600 µg/mL. In addition, they were more active on Gram-positive bacteria than Gram-negative bacteria. The data of this work confirm that the T. polium extracts have significant biological activity and hence can be used in the pharmaceutical industry, clinical applications, and medical research, as well as cosmetic and food industries.