橙皮素A的NMR研究

橙皮素A是从中药北沙参(Glehnia littoralis Fr. Schmidt ex Miquel)的正丁醇萃 取物中分离得到的一种8-O-4′-型异木脂素苷类化合物. 通过化学方法和波谱分析鉴 定了该 化合物的结构. 采用2D NMR技术对其NMR信号进行了全归属. DMSO-d₆代替CD₃OD作为溶剂，并利用重水交换，能准确读出偶合常数J_7,8值.      

超重元素(新核素)合成研究进展情况分析和展望

本文在介绍和分析国际、国内在超重元素（新核素）合成实验研究与理论研究进展情况的基础上对我国今后如何从理论与实验的结合上开展超重元素（核）合成研究工作提出一些看法和建议，提供讨论。     

Dirichlet forms,quasiregular functions and Brownian motion

Summary Given a quasiregular function on an open setU in ⁿ it is shown that there exists a diffusionX _t inU such that mapsX _t inton-dimensional Brownian motion. The process is constructed from a Dirichlet form which can be described explicitly. This enables us to apply stochastic methods in the investigation of quasiregular mappings. Some examples of applications are given, including boundary behaviour and value distribution.     

X射线衍射仪新功能的开发及其应用

根据Ｘ射线衍射仪的结构特点,通过巧妙而简易的改装,增添了“同步照相”新功能。文中分析了开发新功能的可行性;列举了新功能在某些场合下,能使传统的照相法和现代的衍射仪法结合起来,取长补短的例子;指出新功能有助于提高分析测试水平,并可收到一机多用、节能高效的综合效果。     

Sequential cycloaddition approach to the tricyclic core of vibsanin E. Total synthesis of (+/-)-5-epi-10-epi-vibsanin E

[chemical reaction: see text]. A direct access to (+/-)-5-epi-10-epi-vibsanin E is described, based on three key cycloaddition steps, a rhodium-catalyzed [4 + 3] cycloaddition, a heteronuclear [4 + 2] cycloaddition, and a photochemically induced [4 + 2] cycloaddition.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

烯烃聚合数学模拟研究与现状

综述了近年来国内外在烯烃聚合微观形态和宏观反应器数学模拟方面取得的研究成果，指出了烯烃聚合过程数学模拟的发展方向。     

Effectiveness of antioxidants: Suppression of evolution of gaseous degradation products from low-density polyethylene during thermo-oxidation

The present investigation is part of a project concerning improvements of the working environment for polymer manufacturing processes at high temperatures; for example, welding and extrusion coating.The evolution of gaseous degradation products from unstabilized and antioxidant stabilized low-density polyethylene during thermo-oxidation in air at 210°C has been studied by a simple technique using a modified gas chromatograph. Of the thirteen antioxidants investigated (phenols, phosphites, phosphonites, sulphides and metal dithiocarbamates), only phenols (radical scavengers) effectively suppress the formation of gaseous degradation products from the polymer during an induction period.The gaseous degradation products were analysed with combined gas chromatography-mass spectrometry (GC-MS), using direct trapping on the GC column (Porapak® QS). Apart from water and carbon dioxide, the major products are formaldehyde, acetaldehyde, formic and acetic acids. The addition of effective antioxidants strongly reduces the absolute amounts of the degradation products during the induction period, but does not change their relative quantities.     

Electrolysis in calorimetry

The procedure used by many electrochemists in calculating enthalpy in calorimetric measurements of electrolysis reactions is compared to a purely thermodynamic approach, using the data published by Fleischmannet al. [J. Electroanal. Chem., 287 (1990) 293.] as a case study.The set of excess values dH _ex/dt=dH _obs/dt -dH_calo/dt obtained with the former procedure was neither correlated to any of the experimental parameters nor to the set of values found using thermodynamics. The latter, smaller by factors of up to two orders of magnitude, are shown to follow an expression of the form dH _ex/dt=–kI exp (–E _a/RT) with an activation enthalpy of about 85 kJ·mol^–1. It is suggested that recombination of electrolysis gases may account for this.

---

Zusammenfassung Das von vielen Elektrochemikern verwendete Verfahren zur Berechnung der Enthalpie in kalorimetrischen Messungen an Elektrolysereaktionen wurde unter Anwendung der von Fleischmann et.al. in einer Fallstudie [J. Electroanal. Chem., 287 (1990) 293.] veröffentlichten Angaben mit einer rein thermodynamischen Näherung verglichen.Eine Reihe von mit der ersten Methode erhaltenen überschu\werten dH _ex/dt=dH _obs/dt-dH _calc/dt korrelierte weder mit den experimentellen Parametern noch mit den entsprechenden, thermodynamisch gefundenen Werten. Letztere, um etwa zwei Grö\enordnungen kleinere Werte konnten durch die Gleichung dH _ex/dt= -kI exp (-E _a/RT) mit einer Aktivierungsenthalpie von etwa 85 kJ·mol^–1 beschrieben werden. Es wird deshalb nahegelegt, da\ dies einer Rekombinierung der Elektrolysegase zugeschrieben werden kann.

     

Conducting graft copolymers of poly(3‐methylthienyl methacrylate) with pyrrole and thiophene

A thiophene‐functionalized methacrylate monomer (3‐methylthienyl methacrylate) was synthesized via the esterification of 3‐thiophene methanol with methacryloyl chloride. The methacrylate monomer was polymerized by free‐radical polymerization in the presence of azobisisobutyronitrile as the initiator. Graft copolymers of poly(3‐methylthienyl methacrylate) (PMTM2) and polypyrrole and of PMTM2 and polythiophene were synthesized by constant‐potential electrolyses. p‐Toluene sulfonic acid, sodium dodecyl sulfate, and tetrabutylammonium tetrafluoroborate were used as the supporting electrolytes. PMTM2‐coated platinum electrodes were used as anodes in the polymerization of pyrrole and thiophene. Moreover, the oxidative polymerization of poly(3‐methylthienyl methacrylate) (PMTM1) was studied with FeCl₃ as the oxidant. The self‐polymerization of PMTM1 was also investigated by galvanostatic electrolysis both in dichloromethane and in propylene carbonate. The structures of PMTM1 and PMTM2 were investigated by several spectroscopic and thermal methods. The grafting process was elucidated with conductivity measurements, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy studies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4131–4140, 2002